g Commands
gateway
gateway
Syntax
gateway name name
gateway [name name] tunnel [private-address-type private-address-type]
gateway [service service-id]
gateway tunnel [ip-address:port]
gateway name name tunnelip-address:port
gateway name name tunnel
gateway [name name] tunnel state state
gateway [name name] tunnel idi-value idi-prefix
gateway tunnel count
gateway tunnel [private-address-type private-address-type]
Context
[Tree] (show>ipsec gateway)
Full Context
show ipsec gateway
Description
This command displays IPsec gateway information.
Parameters
- name
-
Specifies an IPsec gateway name.
- service-id
-
Specifies the service ID of the default security service used by the IPsec gateway.
- ip-address:port
-
Displays the IP address and UDP port of the SAP IPsec gateway to the tunnel.
- state
-
Specifies the state of the tunnel.
- idi-prefix
-
Displays a string as an IDi prefix. With this parameter, the system lists all the peers with IDi that has specified prefixes.
- count
-
Displays the number of IPsec gateway tunnels with the ike-policy>authmethod command set to psk.
Platforms
7705 SAR Gen 2
Output
The following output is an example of the show ipsec gateway command.
Output Exampleshow ipsec gateway tunnel 10.2.2.100:500
===============================================================================
IPsec Remote Users Tunnel Detail
===============================================================================
IP Addr: 10.2.2.100:500, port: 500
-------------------------------------------------------------------------------
Service Id : 300 Sap Id : tunnel-1.public:100
Address : 10.2.2.100:500
Private If : priv
Private Address : 10.20.20.50
Private Service : 400 Template Id : 1
Replay Window : None Bi Direction SA : true
Host MDA : 1/2
Match TrustAnchor: labroot
Last Oper Changed: 05/04/2016 17:36:20
IKE IDI Type : derAsn1Dn
IKE IDI Value : CN=Client-1
-------------------------------------------------------------------------------
Dynamic Keying Parameters
-------------------------------------------------------------------------------
Transform Id1 : 1 Transform Id2 : None
Transform Id3 : None Transform Id4 : None
IPsec GW Name : rw
Local GW Address : 172.16.100.1
Ike Policy Id : 1 Ike Pol Auth : cert
Pre Shared Key : None
Cert Profile : segw
Trust Anchor Prof: labroot
Selected Cert : segw-1.cert
Selected Key : segw-1.key
Send Chain Prof : None
Local Id Type : none
Client Database
Name : (Not Specified)
Client ID : None
Radius Acct Plcy : None
Radius Auth Plcy : None
TS-List : <none>
Certificate Status Verify
-------------------------------------------------------------------------------
Primary : crl Secondary : none
Default Result : good
DHCP
-------------------------------------------------------------------------------
Admin State : Up Send Release : true
Service : 400
Gi-Address : 10.20.20.1
Server1-Address : 10.9.9.9
DHCPv4 Lease
-------------------------------------------------------------------------------
Private Address : 10.20.20.50
Acquired : 2016/05/04 17:36:19 UTC
Renew : 2016/05/04 18:06:19 UTC
Rebind : 2016/05/04 18:28:49 UTC
Valid Lifetime
End : 2016/05/04 18:36:19 UTC
Total : 3600 seconds
Remaining : 3585 seconds
Server : 10.9.9.9
-------------------------------------------------------------------------------
ISAKMP-SA
-------------------------------------------------------------------------------
State : Up
Established : 05/04/2016 17:36:20 Lifetime : 86400
Expires : 05/05/2016 17:36:20
ISAKMP Statistics
--------------------
Tx Packets : 2 Rx Packets : 2
Tx Errors : 0 Rx Errors : 0
Tx DPD : 0 Rx DPD : 0
Tx DPD ACK : 0 Rx DPD ACK : 0
DPD Timeouts : 0 Rx DPD Errors : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Inbound (index 2)
-------------------------------------------------------------------------------
SPI : 207232
Auth Algorithm : Sha1 Encr Algorithm : Aes128
Installed : 05/04/2016 17:36:20 Lifetime : 3600
Local Traffic Selectors:
10.9.9.9-10.9.9.9
any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
any protocol
Aggregate Statistics
--------------------
Bytes Processed : 0 Packets Processed: 0
Crypto Errors : 0 Replay Errors : 0
SA Errors : 0 Policy Errors : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Outbound (index 1)
-------------------------------------------------------------------------------
SPI : 3433111520
Auth Algorithm : Sha1 Encr Algorithm : Aes128
Installed : 05/04/2016 17:36:20 Lifetime : 3600
Local Traffic Selectors:
10.9.9.9-10.9.9.9
any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
any protocol
Aggregate Statistics
--------------------
Bytes Processed : 0 Packets Processed: 0
Crypto Errors : 0 Replay Errors : 0
SA Errors : 0 Policy Errors : 0
===============================================================================
Fragmentation Statistics
===============================================================================
Encapsulation Overhead : 73
Pre-Encapsulation
Fragmentation Count : 0
Last Fragmented Packet Size : 0
Post-Encapsulation
Fragmentation Count : 0
Last Fragmented Packet Size : 0
===============================================================================
A:vsim-2# show ipsec gateway name "rw" tunnel 10.1.1.100
===============================================================================
IPsec Remote Users Tunnel Detail
===============================================================================
-------------------------------------------------------------------------------
IP Addr: 10.1.1.100, port: 500
-------------------------------------------------------------------------------
Service Id : 300 Sap Id : tunnel-1.public:100
Address : 10.1.1.100
Private If : priv
Private Address : 10.20.20.50
Private Service : 400 Template Id : 1
Replay Window : None Bi Direction SA : true
Host MDA : 1/2
Match TrustAnchor: labroot
Last Oper Changed: 12/14/2016 22:17:05
IKE IDI Type : derAsn1Dn
IKE IDI Value : CN=Client-1
TS List : <none>
Pre-Shared Key : <none>
IKE Policy : (Not Specified)
TCP MSS
Public : N/A
Private : 1200 octets
-------------------------------------------------------------------------------
Dynamic Keying Parameters
-------------------------------------------------------------------------------
Transform Id1 : 1 Transform Id2 : None
Transform Id3 : None Transform Id4 : None
IPsec GW Name : rw
Local GW Address : 172.16.100.1
Ike Policy Id : 1 Ike Pol Auth : cert
Cert Profile : segw
Trust Anchor Prof: labroot
Selected Cert : segw-1.cert
Selected Key : segw-1.key
Send Chain Prof : None
Local Id Type : none
Client Database
Client Index : None
Radius Acct Plcy : None
Radius Auth Plcy : None
Certificate Status Verify
-------------------------------------------------------------------------------
Primary : crl Secondary : none
Default Result : good
DHCP
-------------------------------------------------------------------------------
Admin State : Up Send Release : true
Service : 400
Gi-Address : 10.20.20.1
Server1-Address : 10.9.9.9
DHCPv4 Lease
-------------------------------------------------------------------------------
Private Address : 10.20.20.50
Acquired : 2016/12/14 22:17:04 UTC
Renew : 2016/12/14 22:47:04 UTC
Rebind : 2016/12/14 23:09:34 UTC
Valid Lifetime
End : 2016/12/14 23:17:04 UTC
Total : 3600 seconds
Remaining : 3580 seconds
Server : 10.9.9.9
-------------------------------------------------------------------------------
ISAKMP-SA
-------------------------------------------------------------------------------
State : Up
Established : 12/14/2016 22:17:04 Lifetime : 86400
Expires : 12/15/2016 22:17:04
ISAKMP Statistics
--------------------
Tx Packets : 2 Rx Packets : 2
Tx Errors : 0 Rx Errors : 0
Tx DPD : 0 Rx DPD : 0
Tx DPD ACK : 0 Rx DPD ACK : 0
DPD Timeouts : 0 Rx DPD Errors : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Inbound (index 2)
-------------------------------------------------------------------------------
SPI : 322790
Auth Algorithm : Sha1 Encr Algorithm : Aes128
Installed : 12/14/2016 22:17:05 Lifetime : 3600
Local Traffic Selectors:
172.16.100.1-172.16.100.1
any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
any protocol
Aggregate Statistics
--------------------
Bytes Processed : 0 Packets Processed: 0
Crypto Errors : 0 Replay Errors : 0
SA Errors : 0 Policy Errors : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Outbound (index 1)
-------------------------------------------------------------------------------
SPI : 3462984686
Auth Algorithm : Sha1 Encr Algorithm : Aes128
Installed : 12/14/2016 22:17:05 Lifetime : 3600
Local Traffic Selectors:
172.16.100.1-172.16.100.1
any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
any protocol
Aggregate Statistics
--------------------
Bytes Processed : 0 Packets Processed: 0
Crypto Errors : 0 Replay Errors : 0
SA Errors : 0 Policy Errors : 0
===============================================================================
Fragmentation Statistics
===============================================================================
Encapsulation Overhead : 73
Pre-Encapsulation
Fragmentation Count : 0
Last Fragmented Packet Size : 0
Post-Encapsulation
Fragmentation Count : 0
Last Fragmented Packet Size : 0
===============================================================================
===============================================================================
gateway
Syntax
gateway name name tunnel ip-address:port [statistics] [saved-key]
gateway name name tunnel ip-address:port [temp-mtu]
gateway name name [saved-key]
gateway name name tunnel ip-address:port [saved-key]
Context
[Tree] (clear>ipsec gateway)
Full Context
clear ipsec gateway
Description
This command clears dynamic IPsec tunnel states.
The system clears the statistics counter for the specified tunnel when the statistics parameter option is specified.
The system clears the saved IKE and ESP keys for the specified tunnel, or for all tunnels on the specified gateway if no tunnel is specified when the saved-key parameter option is specified.
The system removes the specified tunnel when the statistics, saved-key, or temp-mtu parameters are not specified.
Parameters
- name
-
Specifies the name of the IPsec GW, up to 32 characters.
- ip-address
-
Specifies the IP address and port of the remote peer.
- port
-
Specifies the port of the remote peer. The specifies channel is cleared if the statistics, saved-key, or temp-mtu parameters are not specified.
- statistics
-
Clears the stats counter.
- saved-key
-
Clears the saved IKE and ESP keys.
- temp-mtu
-
Clears temporary MTU learned from MTU propagation for the specified tunnel.
Platforms
7705 SAR Gen 2
generate-key
generate-key
Syntax
generate-key authentication authentication-protocol authentication-password [privacy privacy-protocol privacy-password] [engine-id identifier]
Context
[Tree] (tools>perform>system>mgmt-itf>snmp generate-key)
Full Context
tools perform system management-interface snmp generate-key
Description
This command generates localized SNMPv3 authentication and privacy keys, which are a hash of the SNMP engine ID and a password. The SNMP engine ID can be displayed with the show system information | match "SNMP Engine ID" command and does not need to be entered. If keys are being generated for a different system, its SNMP engine ID must be specified.
Parameters
- authentication
-
Generates a localized authentication key.
- authentication-protocol
-
Specifies the SNMPv3 authentication protocol.
- authentication-password
-
Specifies the password used to generate the authentication key.
- privacy
-
Keyword to generate a localized privacy key.
- privacy-protocol
-
Specifies the SNMPv3 privacy protocol.
- privacy-password
-
Specifies the privacy password used to generate the privacy key.
- engine-id identifier
-
Keyword that specifies the SNMP engine ID. The identifier must be a hexadecimal string between 10 and 64 digits in length.
Platforms
7705 SAR Gen 2
Output
The following output is an example of a generated authentication and privacy key.
Output ExampleA:ALA-1# tools perform system management-interface snmp generate-key authentication hmac-sha2-512 thisistheauthenticationpassword privacy cfb128-aes-256
thisistheprivacypassword
Authentication :
a764a7fa90099fb179266e2b400a225e3f0960a842fc55704e5b2eb0750bd6a2ca0ed8450b5b57b41f50
fab253961ee698bfc272a71bcc919420c603cef5e628
Privacy : 94560a59230f63241fd596b920cfe2e703f60a8ea0c7c341a913f8d3a46f2256
SNMP Engine ID : 0000197f0000b65dff000000
global
global
Syntax
global
Context
[Tree] (clear>redundancy>multi-chassis>mcr>statistics global)
Full Context
clear redundancy multi-chassis mc-ring statistics global
Description
This command clears multi-chassis ring global statistics.
Platforms
7705 SAR Gen 2
group
group
Syntax
group [grp-ip-address] [hosts | interfaces | saps]
group summary [hosts | interfaces | saps]
Context
[Tree] (show>router>igmp group)
Full Context
show router igmp group
Description
This command displays the multicast group and (S,G) addresses. If no grp-ip-address parameters are specified, then all IGMP group, (*,G) and (S,G) addresses are displayed.
Parameters
- grp-ip-address
-
Displays specific multicast group addresses.
- hosts
-
Displays hosts for the multicast group address.
- interfaces
-
Displays interfaces for the multicast group address.
- saps
-
Displays SAPs for the multicast group address.
Platforms
7705 SAR Gen 2
Output
The following output is an example of IGMP group information. Output fields: IGMP group describes the output fields for IGMP group information.
Output Example*B:Dut-C# show router igmp group
===============================================================================
IGMP Interface Groups
===============================================================================
===============================================================================
IGMP Host Groups
===============================================================================
(*,239.0.0.1)
Fwd List : 239.112.1.2 Up Time : 0d 00:00:21
(10.11.0.1,239.0.0.1)
Fwd List : 239.112.1.1 Up Time : 0d 00:00:30
Blk List : 239.112.1.2 Up Time : 0d 00:00:21
(10.11.0.2,239.0.0.1)
Fwd List : 239.112.1.1 Up Time : 0d 00:00:30
(*,239.0.0.2)
Fwd List : 239.112.1.2 Up Time : 0d 00:00:21
(10.11.0.1,239.0.0.2)
Blk List : 239.112.1.2 Up Time : 0d 00:00:21
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 5
===============================================================================
*B:Dut-C#
*B:Dut-C# show router igmp group summary
===============================================================================
IGMP Interface Groups
===============================================================================
===============================================================================
IGMP Host Groups Summary Nbr Fwd Hosts Nbr Blk Hosts
===============================================================================
(*,239.0.0.1) 1 0
(10.11.0.1,239.0.0.1) 1 1
(10.11.0.2,239.0.0.1) 1 0
(*,239.0.0.2) 1 0
(10.11.0.1,239.0.0.2) 0 1
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 5
===============================================================================
*B:Dut-C#
A:NYC# show router igmp group 239.24.24.24
===============================================================================
IGMP Groups
===============================================================================
(*,239.24.24.24) Up Time : 0d 05:23:23
Fwd List : nyc-vlc
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 1
===============================================================================
A:NYC#
|
Label |
Description |
|---|---|
|
IGMP Groups |
The IP multicast sources corresponding to the IP multicast groups. |
|
Fwd List |
The list of interfaces in the forward list. |
|
Blk List |
The list of interfaces in the blocked list. |
group
Syntax
group [name] [detail]
Context
[Tree] (show>router>bgp group)
Full Context
show router bgp group
Description
This command displays group information for a BGP peer group. This command can be entered with or without parameters.
When this command is issued without a group name, information about all peer groups displays.
When the command is issued with a specific group name, information only pertaining to that specific peer group displays.
The "State” field displays the BGP group’s operational state. Other valid states are:
-
Up - BGP global process is configured and running.
-
Down - BGP global process is administratively shutdown and not running.
-
Disabled - BGP global process is operationally disabled. The process must be restarted by the operator.
Parameters
- name
-
Displays information for the specified BGP group, up to 64 characters.
- detail
-
Displays detailed information.
Platforms
7705 SAR Gen 2
Output
The following outputs are example of BGP group information, and Output fields: standard and detailed group describes the output fields.
Output Example*A:Dut-B# show router bgp group
===============================================================================
BGP Group
===============================================================================
-------------------------------------------------------------------------------
Group : abc
-------------------------------------------------------------------------------
Description : (Not Specified)
Group Type : No Type State : Down
Peer AS : n/a Local AS : 0
Local Address : n/a Loop Detect : Ignore
Import Policy : None Specified - Default Accept
Export Policy : None Specified - Default Accept
Hold Time : 90 Keep Alive : 30
Min Hold Time : 0
Cluster Id : None Client Reflect : Enabled
NLRI : Unicast Preference : 170
TTL Security : Disabled Min TTL Value : n/a
Graceful Restart : Disabled Stale Routes Time: n/a
Restart Time : n/a
Auth key chain : n/a
Bfd Enabled : Disabled Disable Cap Nego : Disabled
Creation Origin : manual
Default Route Tgt: Disabled
Aigp Metric : Disabled
Split Horizon : Disabled
Damp Peer Oscill*: Disabled
GR Notification : Disabled Fault Tolerance : Disabled
Next-Hop Unchang*: None
Routes Resolve T*: Disabled
Egress Engineeri*: Enabled
List of Static Peers
- 1.1.1.1 :
List of Dynamic Peers
Total Peers : 1 Established : 0
-------------------------------------------------------------------------------
Peer Groups : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-B#
*A:Dut-B#
*A:ALA-12# show router 3 bgp group
===============================================================================
BGP Groups
===============================================================================
Group : To_AS_40000
-------------------------------------------------------------------------------
Description : Not Available
Group Type : No Type State : Up
Peer AS : 40000 Local AS : 65206
Local Address : n/a Loop Detect : Ignore
Export Policy : direct2bgp
Hold Time : 90 Keep Alive : 30
Cluster Id : None Client Reflect : Enabled
NLRI : Unicast Preference : 170
List of Peers
- 10.0.0.1 : To_Jukebox
- 10.0.0.12 : Not Available
- 10.0.0.13 : Not Available
- 10.0.0.14 : To_ALA-1
- 10.0.0.15 : To_H-215
Total Peers : 5 Established : 2
===============================================================================
*A:ALA-12#
|
Label |
Description |
|---|---|
|
Group |
BGP group name |
|
Group Type |
No Type — Peer type not configured External — Peer type configured as external BGP peers Internal — Peer type configured as internal BGP peers |
|
State |
Disabled — The BGP peer group has been operationally disabled Down — The BGP peer group is operationally inactive Up — The BGP peer group is operationally active |
|
Peer AS |
The configured or inherited peer AS for the specified peer group |
|
Local AS |
The configured or inherited local AS for the specified peer group |
|
Local Address |
The configured or inherited local address for originating peering for the specified peer group |
|
Loop Detect |
The configured or inherited loop detect setting for the specified peer group |
|
Connect Retry |
The configured or inherited connect retry timer value |
|
Authentication |
n/a — No authentication is configured MD5 — MD5 authentication is configured |
|
Local Pref |
The configured or inherited local preference value |
|
MED Out |
The configured or inherited MED value assigned to advertised routes without a MED attribute |
|
Min Route Advt. |
The minimum amount of time that must pass between route updates for the same IP prefix |
|
Min AS Originate |
The minimum amount of time that must pass between updates for a route originated by the local router |
|
Multihop |
The maximum number of router hops a BGP connection can traverse |
|
Multipath |
The configured or inherited multipath value, determining the maximum number of ECMP routes BGP can advertise to the RTM |
|
Prefix Limit |
No Limit — No route limit assigned to the BGP peer group 1 to 4294967295 — The maximum number of routes BGP can learn from a peer |
|
Passive |
Disabled — BGP attempts to establish BGP connections with neighbors in the specified peer group Enabled — BGP does actively attempt to establish BGP connections with neighbors in the specified peer group |
|
Next Hop Self |
Disabled — BGP is not configured to send only its own IP address as the BGP nexthop in route updates to neighbors in the peer group Enabled — BGP sends only its own IP address as the BGP nexthop in route updates to neighbors in the specified peer group |
|
Aggregator ID 0 |
Disabled — BGP is not configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates sent to the neighbor in the peer group Enabled — BGP is configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates sent to the neighbor in the peer group |
|
Remove Private |
Disabled — BGP will not remove all private AS numbers from the AS path attribute in updates sent to the neighbor in the peer group Enabled — BGP removes all private AS numbers from the AS path attribute in updates sent to the neighbor in the peer group |
|
Damping |
Disabled — The peer group is configured not to dampen route flaps Enabled — The peer group is configured to dampen route flaps |
|
Export Policy |
The configured export policies for the peer group |
|
Import Policy |
The configured import policies for the peer group |
|
Hold Time |
The configured hold time setting |
|
Keep Alive |
The configured keepalive setting |
|
Cluster Id |
n/a — No cluster ID has been configured |
|
Client Reflect |
Disabled — The BGP route reflector will not reflect routes to this neighbor Enabled — The BGP route reflector is configured to reflect routes to this neighbor |
|
NLRI |
The type of NLRI information that the specified peer group can accept Unicast — IPv4 unicast routing information can be carried |
|
Preference |
The configured route preference value for the peer group |
|
Egress Engineering |
Enabled — EPE is enabled for the peer group Disabled — EPE is disabled for the peer group |
|
List of Peers |
A list of BGP peers configured under the peer group |
|
Total Peers |
The total number of peers configured under the peer group |
|
Established |
The total number of peers that are in an established state |
group
Syntax
group [grp-ipv6-address] [hosts | interfaces | saps]
group summary [hosts | interfaces | saps]
Context
[Tree] (show>router>mld group)
Full Context
show router mld group
Description
This command displays the multicast group and (S,G) addresses. If no grp-ipv6-address parameters are specified, then all MLD group, (*,G) and (S,G) addresses are displayed.
Parameters
- grp-ipv6-address
-
Displays specific multicast group addresses.
- hosts
-
Displays hosts for the multicast group address.
- interfaces
-
Displays interfaces for the multicast group address.
- saps
-
Displays SAPs for the multicast group address.
Platforms
7705 SAR Gen 2
Output
The following output is an example of MLD group information. Output fields: MLD group describes the output fields for MLD group information.
Output Example*A:Dut-A# show router mld group
===============================================================================
MLD Interface Groups
===============================================================================
(*,ff04:db8:224:100:0:0) UpTime: 0d
00:10:09
Fwd List : intf_to_ixia
(*,ff04:db8:224:100:0:1) UpTime: 0d
00:10:09
Fwd List : intf_to_ixia
(*,ff04:db8:224:100:0:2) UpTime: 0d
00:10:09
Fwd List : intf_to_ixia
(*,ff04:db8:224:100:0:3) UpTime: 0d
00:10:09
Fwd List : intf_to_ixia
(*,ff04:db8:224:100:0:4) UpTime: 0d
00:10:09
Fwd List : intf_to_ixia
-------------------------------------------------------------------------------
Entries : 5
===============================================================================
MLD Host Groups
===============================================================================
No Matching Entries
===============================================================================
MLD SAP Groups
===============================================================================
No Matching Entries
===============================================================================
*A:Dut-A#
*A:Dut-A# show router mld group summary
===============================================================================
MLD Interface Groups Summary Nbr Fwd Nbr Blk
===============================================================================
(*,ff04:db8:224:100:0:0) 1 0
(*,ff04:db8:224:100:0:1) 1 0
(*,ff04:db8:224:100:0:2) 1 0
(*,ff04:db8:224:100:0:3) 1 0
(*,ff04:db8:224:100:0:4) 1 0
-------------------------------------------------------------------------------
Entries : 5
===============================================================================
MLD Host Groups Summary Nbr Fwd Nbr Blk
===============================================================================
No Matching Entries
===============================================================================
MLD SAP Groups Summary Nbr Fwd Nbr Blk
===============================================================================
No Matching Entries
===============================================================================
*A:Dut-A#
*A:Dut-A# show router mld group ff04:db8:224:100:0:0
===============================================================================
MLD Interface Groups
===============================================================================
(*,ff04:db8:224:100:0:0) UpTime: 0d
00:10:24
Fwd List : intf_to_ixia
-------------------------------------------------------------------------------
Entries : 1
===============================================================================
MLD Host Groups
===============================================================================
No Matching Entries
===============================================================================
MLD SAP Groups
===============================================================================
No Matching Entries
===============================================================================
*A:Dut-A#
|
Label |
Description |
|---|---|
|
MLD Groups |
The IP multicast sources corresponding to the IPv6 multicast groups. |
|
Fwd List |
The list of interfaces in the forward list. |
|
Blk List |
The list of interfaces in the blocked list. |
group
Syntax
group grp-ip-address [source ip-address [type {starstarrp | starg | sg}] [detail] [family]
group grp-ip-address [source ip-address [type {starstarrp | starg | sg}] [detail] [family] rpfv
Context
[Tree] (show>router>pim group)
Full Context
show router pim group
Description
This command displays PIM source group database information.
Parameters
- grp-ip-address
-
Specifies the IP multicast group address for which this entry contains information.
- source ip-address
-
Specifies the source address for which this entry contains information.
- type starstarrp
-
Specifies that only (*, *, rp) entries are displayed.
- type starg
-
Specifies that only (*,G) entries are displayed.
- type sg
-
Specifies that only (S,G) entries are displayed.
- detail
-
Displays detailed group information.
- family
-
Displays family information.
- rpfv
-
Displays proxy RPF vectors that are used for inter-AS Rosen MVPN.
Platforms
7705 SAR Gen 2
Output
The following output is an example of PIM group information. Output fields: PIM group provides PIM group field descriptions.
Output ExampleA:Dut-A# show router pim group
===============================================================================
PIM Group ipv4
===============================================================================
Group Address Type Spt Bit Inc Intf no.Oifs
Source Address RP Inc Intf(S)
-------------------------------------------------------------------------------
239.1.1.1 (S,G) ip-10.10.2.1 1
10.1.1.2 10.20.1.4 ip-10.10.1*
===============================================================================
A:Dut-A#
*A:Dut-C# show router 100 pim group ipv6
===============================================================================
Legend: A = Active S = Standby
===============================================================================
PIM Groups ipv6
===============================================================================
Group Address Type Spt Bit Inc Intf No.Oifs
Source Address RP State Inc Intf(S)
-------------------------------------------------------------------------------
ff04:db8:224:100:0:0 (*,G) vprn_itf_C_11* 2
* 2001:db8:110:100:1*
ff04:db8:224:100:0:0 (S,G) spt mpls-if-74457* 3
2001:db8:100:114:1:2 2001:db8:110:100:1*
ff04:db8:224:100:0:1 (*,G) vprn_itf_C_11* 2
* 2001:db8:110:100:1*
ff04:db8:224:100:0:1 (S,G) spt mpls-if-74457* 3
2001:db8:100:114:1:2 2001:db8:110:100:1*
ff04:db8:224:100:0:2 (*,G) vprn_itf_C_11* 2
* 2001:db8:110:100:1*
ff04:db8:224:100:0:2 (S,G) spt mpls-if-74457* 3
2001:db8:100:114:1:2 2001:db8:110:100:1*
ff04:db8:224:100:0:3 (*,G) vprn_itf_C_11* 2
* 2001:db8:110:100:1*
ff04:db8:224:100:0:3 (S,G) spt mpls-if-74457* 3
2001:db8:100:114:1:2 2001:db8:110:100:1*
ff04:db8:224:100:0:4 (*,G) vprn_itf_C_11* 2
* 2001:db8:110:100:1*
ff04:db8:224:100:0:4 (S,G) spt mpls-if-74457* 3
2001:db8:100:114:1:2 2001:db8:110:100:1*
-------------------------------------------------------------------------------
Groups : 10
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-C#
A:NYC>show>router>pim# group 239.255.255.250
===============================================================================
PIM Groups
===============================================================================
Group Address Source Address RP Address Type Spt Incoming Num
Bit Intf Oifs
-------------------------------------------------------------------------------
239.255.255.250 * 10.22.187.240 <*,G> nyc-sjc 1
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
A:NYC>show>router>pim#
A:NYC>show>router>pim# group 239.255.255.250 detail
===============================================================================
PIM Source Group
===============================================================================
Group Address : 239.255.255.250 Source Address : 10.1.1.2
RP Address : 10.100.100.1 Type : (S,G)
Flags : spt, rpt-prn-des Keepalive Timer Exp: 0d 00:03:07
MRIB Next Hop : 10.1.1.2 MRIB Src Flags : direct
Up Time : 0d 00:00:50 Resolved By : rtable-u
Up JP State : Joined Up JP Expiry : 0d 00:00:00
Up JP Rpt : Pruned Up JP Rpt Override : 0d 00:00:00
Register State : Pruned Register Stop Exp : 0d 00:00:47
Reg From Anycast RP: No
RPF Neighbor : 10.1.1.2
Incoming Intf : SOURCE-3
Outgoing Intf List : To-Dut-A
Curr Fwding Rate : 482.9 kbps
Forwarded Packets : 1262 Discarded Packets : 0
Forwarded Octets : 1269572 RPF Mismatches : 0
Spt threshold : 0 kbps
===============================================================================
A:NYC>show>router>pim#
B:Dut-C# show router pim group 239.0.0.1 type sg detail
===============================================================================
PIM Source Group ipv4
===============================================================================
Group Address : 239.0.0.1
Source Address : 10.11.0.1
RP Address : 10.20.1.3
Flags : rpt-prn-des Type : (S,G)
MRIB Next Hop : 10.11.0.1
MRIB Src Flags : direct Keepalive Timer : Not Running
Up Time : 0d 00:04:17 Resolved By : rtable-u
Up JP State : Joined Up JP Expiry : 0d 00:00:00
Up JP Rpt : Pruned Up JP Rpt Override : 0d 00:00:00
Register State : No Info
Reg From Anycast RP: No
Rpf Neighbor : 10.11.0.1
Incoming Intf : svc_itf
Outgoing Host List : 239.112.1.1
Curr Fwding Rate : 0.0 kbps
Forwarded Packets : 0 Discarded Packets : 0
Forwarded Octets : 0 RPF Mismatches : 0
Spt threshold : 0 kbps ECMP opt threshold : 7
Admin bandwidth : 1 kbps Preference : 0
===============================================================================
PIM Source Group ipv4
===============================================================================
Group Address : 239.0.0.1
Source Address : 10.11.0.2
RP Address : 10.20.1.3
Flags : Type : (S,G)
MRIB Next Hop : 10.11.0.2
MRIB Src Flags : direct Keepalive Timer : Not Running
Up Time : 0d 00:04:18 Resolved By : rtable-u
Up JP State : Joined Up JP Expiry : 0d 00:00:00
Up JP Rpt : Not Pruned Up JP Rpt Override : 0d 00:00:00
Register State : No Info
Reg From Anycast RP: No
Rpf Neighbor : 10.11.0.2
Incoming Intf : svc_itf
Outgoing Host List : 10.112.1.1, 10.112.1.2
Curr Fwding Rate : 0.0 kbps
Forwarded Packets : 0 Discarded Packets : 0
Forwarded Octets : 0 RPF Mismatches : 0
Spt threshold : 0 kbps ECMP opt threshold : 7
Admin bandwidth : 1 kbps Preference : 0
-------------------------------------------------------------------------------
Groups : 2
===============================================================================
*B:Dut-C#
A:Dut-A# show router pim group detail
===============================================================================
PIM Source Group ipv4
===============================================================================
Group Address : 239.1.1.1
Source Address : 10.1.1.21
RP Address : 10.20.1.4
Advt Router : 10.20.1.3
Flags : Type : (S,G)
MRIB Next Hop : 10.10.2.3
MRIB Src Flags : remote Standby Src Flags : remote
keepalive Timer : Not Running
Up Time : 0d 00:01:22 Resolved By : rtable-u
Up JP State : Joined Up JP Expiry : 0d 00:00:00
Up JP Rpt : Pruned Up JP Rpt Override : 0d 00:00:00
Up Stdby JP State : Joined Up Stdby JP Expiry : 0d 00:00:12
Register State : No Info
Reg From Anycast RP: No
Rpf Neighbor : 10.10.2.3 Stdby Rpf Neighbor : 10.10.1.2
Incoming Intf : ip-10.10.2.1 Stdby Intf : ip-10.10.1.1
Outgoing Host List : ix
Curr Fwding Rate : 0.0 kbps
Forwarded Packets : 0 Discarded Packets : 0
Forwarded Octets : 0 RPF Mismatches : 0
Spt threshold : 0 kbps ECMP opt threshold : 7
Admin bandwidth : 1 kbps
===============================================================================
PIM Source Group ipv4
|
Label |
Description |
|---|---|
|
Group Address |
The IP multicast group address for which this entry contains information |
|
Source Address |
The source address of the multicast sender. The value is 0 if the type is configured as starg. The address of the Rendezvous Point (RP) display when the type is configured as starRP. |
|
RP Address |
The RP address |
|
Type |
The type of entry, (*,*, rp)/(*,G) or (S,G). |
|
Spt Bit |
Specifies whether to forward on (*,*, rp)/(*,G) or on (S,G) state. It is updated when the (S,G) data comes on the RPF interface towards the source. |
|
Incoming Intf |
The interface on which the traffic comes in. It can be the RPF interface to the RP (if starg) or the source (if sg). |
|
Num Oifs |
The number of interfaces in the inherited outgoing interface list. An inherited list inherits the state from other types. |
|
Flags |
The different lists to which this interface belongs |
|
Keepalive Timer Exp |
The keepalive timer expiration which is applicable only for (S,G) entries. The (S,G) keepalive timer is updated by data being forwarded using this (S,G) Forwarding state. It is used to keep (S,G) state alive in the absence of explicit (S,G) joins. |
|
MRIB Next Hop |
The next hop address towards the RP |
|
MRIB Src Flags |
MRIB information about the source. If the entry is of type starg or starstarrp, it will contain information about the RP for the group. |
|
Up Time |
The time since this source group entry was created. |
|
Resolved By |
The route table used for RPF check. |
|
Up JP State |
The upstream join prune state for this entry on the interface. PIM join prune messages are sent by the downstream routers towards the RPF neighbor. |
|
Up JP Expiry |
The minimum amount of time remaining before this entry will be aged out. |
|
Up JP Rpt |
The join prune Rpt state for this entry on the interface. PIM join/prune messages are sent by the downstream routers towards the RPF neighbor. (S,G, rpt) state is a result of receiving (S,G, rpt) JP message from the downstream router on the RP tree. |
|
Up JP Rpt Override |
The value used to delay triggered Join (S,G, rpt) messages to prevent implosions of triggered messages. If this has a non-zero value, it means that the router was in 'notPruned' state and it saw a prune (S,G, rpt) message being sent to RPF (S,G, rpt). If the router sees a join (S,G, rpt) override message being sent by some other router on the LAN while the timer is still non-zero, it simply cancels the override timer. If it does not see a join (S,G, rpt) message, then on expiry of the override timer, it sends its own join (S,G, rpt) message to RPF (S,G, rpt). A similar scenario exists when RPF (S,G, rpt) changes to become equal to RPF (*,G). |
|
Register State |
The register state. The register state is kept at the source DR. When the host starts sending multicast packets and if there are no entries programmed for that group, the source DR sends a register packet to the RP (g). Register state transition happen based on the register stop timer and the response received from the RP. |
|
Register Stop Exp |
The time remaining before the register state might transition to a different state |
|
Register from Anycast RP |
The status of the register packet for that group received from one of the RP from the anycast-RP set |
|
RPF Neighbor |
The address of the RPF neighbor |
|
Outgoing Intf List |
A list of interfaces on which data is forwarded. |
|
Curr Fwding Rate |
The current forwarding rate of the multicast data for this group and source. This forwarding rate is calculated before ingress QoS policing or shaping is applied. |
|
Forwarded Packets |
The number of multicast packets that were forwarded to the interfaces in the outgoing interface list. This packet count is before ingress QoS policing or shaping is applied. |
|
Discarded Packets |
The number of multicast packets that matched this source group entry but were discarded. For (S,G) entries, if the traffic is getting forwarded on the SPT, the packets arriving from the RPT will be discarded. |
|
Forwarded Octets |
The number of octets forwarded |
|
RPF Mismatches |
The number of multicast packets that matched this source group entry but they did not arrive on the interface. |
|
Spt threshold |
The value of the SPT threshold configured for that group. 0 kb/s means that the switch to the SP tree occurs immediately. |
group
Syntax
group [group-name] [detail]
Context
[Tree] (show>router>rip group)
Full Context
show router rip group
Description
This command displays RIP group information.
Parameters
- group-name
-
Displays RIP group information for the specified group.
- detail
-
Displays detailed RIP group information.
Platforms
7705 SAR Gen 2
Output
Output fields: RIP group describes the standard command output fields for a RIP group.
|
Label |
Description |
|---|---|
|
Group |
The RIP group name. |
|
Adm |
Down — The RIP group is administratively down. Up — The RIP group is administratively up. |
|
Opr |
Down — The RIP group is operationally down. Up — The RIP group is operationally up. |
|
Send Mode |
Bcast — Specifies that RIPv2 formatted messages are sent to the broadcast address. Mcast — Specifies that RIPv2 formatted messages are sent to the multicast address. None — Specifies that no RIP messages are sent (silent listener). RIPv1 — Specifies that RIPv1 formatted messages are sent to the broadcast address.asp |
|
Recv Mode |
Both — Specifies that RIP updates in either version 1 or version 2 format will be accepted. None — Specifies that RIP updates will not be accepted. RIPv1 — Specifies that RIP updates in version 1 format only will be accepted. RIPv2 — Specifies that RIP updates in version 2 format only will be accepted. |
|
Metric In |
The metric value added to routes received from a RIP neighbor. |
The following output is an example of RIP group information.
Output Example: Standard RIP GroupA:ALA-A# show router rip group
===============================================================================
RIP Groups
===============================================================================
Group Adm Opr Send Recv Metric
Mode Mode In
-------------------------------------------------------------------------------
rip-group Up Down BCast Both 1
===============================================================================
A:ALA-A#
A:ALA-A# show router rip group detail
===============================================================================
RIP groups (Detail)
===============================================================================
-------------------------------------------------------------------------------
Group "rip-group"
-------------------------------------------------------------------------------
Description : No Description Available
Admin State : Up Oper State : Down
Send Mode : Broadcast Receive Mode : Both
Metric In : 1 Metric Out : 1
Split Horizon : Enabled Check Zero : Disabled
Message Size : 25 Preference : 100
Auth. Type : None Update Timer : 30
Timeout Timer : 180 Flush Timer : 120
Export Policies:
None
Import Policies:
None
===============================================================================
A:ALA-A#
group
Syntax
group [group-name] [detail]
Context
[Tree] (show>router>ripng group)
Full Context
show router ripng group
Description
This command displays RIPng group information.
Parameters
- group-name
-
Displays RIPng group information for the specified group.
- detail
-
Displays detailed RIPng group information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of RIPng group information.
Output Example*A:Dut-C>config>router>if# show router ripng group "A"
===============================================================================
RIP-NG Groups
===============================================================================
Group Adm Opr Send Recv Metric
Mode Mode In
-------------------------------------------------------------------------------
A Up Up RipNg RipNg 1
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:Dut-C>config>router>if# show router ripng group "A" detail
===============================================================================
RIP-NG groups (Detail)
===============================================================================
-------------------------------------------------------------------------------
Group "A"
-------------------------------------------------------------------------------
Description : No Description Available
Admin State : Up Oper State : Up
Send Mode : RipNg Receive Mode : RipNg
Metric In : 1 Metric Out : 1
Split Horizon : Enabled Check Zero : Disabled
Message Size : 25 Preference : 100
Update Timer : 1
Timeout Timer : 5 Flush Timer : 5
BFD : Enabled
Export Policies:
directToRipng
Import Policies:
None
===============================================================================
group
Syntax
group grp-ip-address [source ip-address] [interval interval] [repeat repeat] [absolute | rate]
Context
[Tree] (monitor>router>pim group)
Full Context
monitor router pim group
Description
This command monitors statistics for a PIM source group.
Parameters
- grp-ip-address
-
Specifies the IP address of an multicast group that identifies a set of recipients that are interested in a particular data stream.
- ip-address
-
Specifies the source IP address to use in the ping requests in dotted decimal notation.
- interval
-
Configures the interval for each display, in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
Platforms
7705 SAR Gen 2
group-encryption
group-encryption
Syntax
group-encryption
Context
[Tree] (show group-encryption)
Full Context
show group-encryption
Description
Commands in this context display group encryption information.
Platforms
7705 SAR Gen 2
group-encryption
Syntax
group-encryption
Context
[Tree] (clear group-encryption)
Full Context
clear group-encryption
Description
Commands in this context clear group encryption parameters.
Platforms
7705 SAR Gen 2
group-interface
group-interface
Syntax
group-interface [fwd-service service-id] [ip-int-name]
Context
[Tree] (show>router>igmp>statistics group-interface)
Full Context
show router igmp statistics group-interface
Description
This command displays IGMP statistics for group interfaces.
Parameters
- service-id
-
Specifies the service ID.
- ip-int-name
-
Specifies the IP interface name, up to 32 characters.
Platforms
7705 SAR Gen 2
grpc
grpc
Syntax
grpc
grpc connection
grpc rpc [rpc-id]
Context
[Tree] (show>system grpc)
Full Context
show system grpc
Description
This command displays gRPC server information.
Parameters
- connection
-
This command displays information for gRPC connections.
- rpc-id
-
Specifies an rpc ID.
Platforms
7705 SAR Gen 2
Output
The following output is an example of system gRPC information.
Output fields: system gRPC describes system gRPC output fields.
Output ExampleA:admin@Dut-A# show system grpc
===============================================================================
gRPC Server
===============================================================================
Administrative State : Enabled
Operational State : Up
Supported services
-------------------------------------------------------------------------------
gNMI Version : 0.4.0
===============================================================================
A:admin@Dut-A# show system grpc connection
===============================================================================
gRPC Server connections
===============================================================================
Address : 192.99.5.0
Port : 49648
Establishment Time : 2018/02/20 09:51:48
Active RPC Count : 0
Total RPC Count : 1
Rx Bytes : 2954
Tx Bytes : 3908
-------------------------------------------------------------------------------
No. of connections : 1
===============================================================================
A:node-6>show>system# grpc rpc
===============================================================================
gRPC Server RPCs
===============================================================================
No. of RPCs : 0
===============================================================================
|
Label |
Description |
|---|---|
|
gRPC Server |
Specifies the gRPC server name. |
|
Administrative State |
Specifies the administrative state (Enabled, Disabled). |
|
Operational State |
Specifies the operational state (Up, Down, Transition). |
|
Supported services |
Specifies the supported services. |
|
gNMI Version |
Specifies the gNMI version. |
|
Address |
Specifies the IP address. |
|
Port |
Specifies the port number. |
|
Establishment Time |
Specifies the establishment time. |
|
Active RPC Count |
Specifies the active RPC count. |
|
Total RPC Count |
Specifies the total RPC count. |
|
Rx Bytes |
Specifies the number of received bytes. |
|
Tx Bytes |
Specifies the number of transmitted bytes. |
|
No. of connections |
Specifies the number of gRPC connections. |
|
No. of RPCs |
Specifies the number of RPCs. |
grpc
Syntax
grpc
Context
[Tree] (show>system>telemetry grpc)
Full Context
show system telemetry grpc
Description
Commands in this context display gRPC telemetry subscriptions.
Platforms
7705 SAR Gen 2
grpc-tunnel
grpc-tunnel
Syntax
grpc-tunnel
Context
[Tree] (show>system grpc-tunnel)
Full Context
show system grpc-tunnel
Description
Commands in this context display gRPC tunnel information.
Platforms
7705 SAR Gen 2
grt-lookup
grt-lookup
Syntax
grt-lookup
Context
[Tree] (clear>router grt-lookup)
Full Context
clear router grt-lookup
Description
This command re-evaluates route policies for GRT.
Platforms
7705 SAR Gen 2
gsmp
gsmp
Syntax
gsmp
Context
[Tree] (show>service>id gsmp)
Full Context
show service id gsmp
Description
Commands in this context display GSMP information.
Platforms
7705 SAR Gen 2
gsmp
Syntax
gsmp
Context
[Tree] (clear>service>id gsmp)
Full Context
clear service id gsmp
Description
Commands in this context clear GSMP statistics.
Platforms
7705 SAR Gen 2