e Commands
ecmp
ecmp
Syntax
ecmp
Context
[Tree] (show>router ecmp)
Full Context
show router ecmp
Description
This command displays the ECMP settings for the router.
Platforms
7705 SAR Gen 2
Output
The following output is an example of ECMP settings information, and Output fields: ECMP describes the output fields for the router ECMP settings.
Output ExampleA:ALA-A# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Configured-ECMP-Routes
-------------------------------------------------------------------------------
1 Base True 8
===============================================================================
A:ALA-A#
*A:Dut-C# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Max-ECMP- Weight ECMP
Rtes
-------------------------------------------------------------------------------
1 Base True 32 True
===============================================================================
|
Label |
Description |
|---|---|
|
Instance |
The router instance number |
|
Router Name |
The name of the router instance |
|
ECMP |
False — ECMP is disabled for the instance True — ECMP is enabled for the instance |
|
Configured-ECMP-Routes |
The number of ECMP routes configured for path sharing |
egress-if
egress-if
Syntax
egress-if port-id [summary | detail] [family]
Context
[Tree] (show>router>ldp>bindings>active egress-if)
Full Context
show router ldp bindings active egress-if
Description
This command displays LDP active bindings by matching the egress interface.
Parameters
- port-id
-
Specifies the port ID.
- family
-
Specifies the address family.
Platforms
7705 SAR Gen 2
egress-label
egress-label
Syntax
egress-label start-label [end-label]
Context
[Tree] (show>service egress-label)
Full Context
show service egress-label
Description
This command displays service information using the range of egress labels.
If only the mandatory egress-label1 parameter is specified, only services using the specified label are displayed.
If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.
Use the show router ldp bindings command to display dynamic labels.
Parameters
- start-label
-
The starting egress label value for the label range. If only start-label is specified, services only using start-label are displayed.
- end-label
-
The ending egress label value for the label range.
Platforms
7705 SAR Gen 2
Output
The following output is an example of service egress label information.
Output Example*A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 100:1 Mesh 0 0
...
1 107:1 Mesh 0 0
1 108:1 Mesh 0 0
1 300:1 Mesh 0 0
1 301:1 Mesh 0 0
1 302:1 Mesh 0 0
1 400:1 Mesh 0 0
1 500:2 Spok 131070 2001
1 501:1 Mesh 131069 2000
100 300:100 Spok 0 0
200 301:200 Spok 0 0
300 302:300 Spok 0 0
400 400:400 Spok 0 0
------------------------------------------------------------------------------
Number of Bindings Found : 23
==============================================================================
*A:ALA-12#
Output fields: service egress describes show service egress label output fields.
|
Label |
Description |
|---|---|
|
Svc Id |
The ID that identifies a service. |
|
Sdp Id |
The ID that identifies an SDP. |
|
Type |
Indicates whether the SDP binding is a spoke or a mesh. |
|
I. Lbl |
The VC label used by the far-end device to send packets to this device in this service by the SDP. |
|
E. Lbl |
The VC label used by this device to send packets to the far-end device in this service by the SDP. |
|
Number of bindings found |
The total number of SDP bindings that exist within the specified egress label range. |
egress-lsp
egress-lsp
Syntax
egress-lsp tunnel-id [summary | detail] [family]
Context
[Tree] (show>router>ldp>bindings>active egress-lsp)
Full Context
show router ldp bindings active egress-lsp
Description
This command displays LDP active bindings by matching the egress LSP.
Parameters
- tunnel-id
-
Specifies the tunnel ID.
- family
-
Specifies the address family.
Platforms
7705 SAR Gen 2
egress-nh
egress-nh
Syntax
egress-nh [family] [summary | detail] ip-address
Context
[Tree] (show>router>ldp>bindings>active egress-nh)
Full Context
show router ldp bindings active egress-nh
Description
This command displays LDP active bindings by matching the egress Next-Hop (NH).
Parameters
- family
-
Specifies the address family.
- ip-address
-
Specifies the IPv4 or IPv6 address.
Platforms
7705 SAR Gen 2
encryption-keygroup
encryption-keygroup
Syntax
encryption-keygroup keygroup-id [spi spi]
Context
[Tree] (show>grp-encryp encryption-keygroup)
Full Context
show group-encryption encryption-keygroup
Description
This command displays NGE information for a key group.
Parameters
- keygroup-id
-
Specifies the key group identifier to use for the output display.
- spi
-
Specifies the SPI to use for the output display.
Platforms
7705 SAR Gen 2
Output
The following output is an example of encryption key group information, and Output fields: encryption key group describes the fields.
Output Exampledomain1>show>grp-encryp# encryption-keygroup 2
===============================================================================
Encryption Keygroup Configuration Detail
===============================================================================
Keygroup Id : 2
Keygroup Name : KG1_secure
Description : Most_secure_KG
Authentication Algo: sha256
Encryption Algo : aes128
Active Outbound SA : 6
Activation Time : 04/20/2015 20:07:31
-------------------------------------------------------------------------------
Security Associations
-------------------------------------------------------------------------------
Spi : 2
Install Time : 04/20/2015 20:08:17
Key CRC : 0x806fb970
Spi : 6
Install Time : 04/20/2015 19:43:40
Key CRC : 0xa4f2d262
-------------------------------------------------------------------------------
Encryption Keygroup Forwarded Statistics
-------------------------------------------------------------------------------
Encrypted Pkts : 0 Encrypted Bytes : 0
Decrypted Pkts : 0 Decrypted Bytes : 0
-------------------------------------------------------------------------------
Encryption Keygroup Outbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Unsupported Uplink : 0
Enqueue Error : 0 Other : 0
-------------------------------------------------------------------------------
Encryption Keygroup Inbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Invalid Spi : 0
Authentication Failure *: 0 Control Word Mismatch : 0
Padding Error : 0 Enqueue Error : 0
Other : 0
-------------------------------------------------------------------------------
---------------------------------------------
SDP Keygroup Association Table
---------------------------------------------
SDP ID Direction
---------------------------------------------
61 Inbound Outbound
---------------------------------------------
Inbound Keygroup SDP Association Count: 1
Outbound Keygroup SDP Association Count: 1
---------------------------------------------
VPRN Keygroup Association Table
---------------------------------------------
VPRN SVC ID Direction
---------------------------------------------
12 Inbound Outbound
---------------------------------------------
Inbound Keygroup VPRN Association Count: 1
Outbound Keygroup VPRN Association Count: 1
---------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
domain1>show>grp-encryp#
domain1# show group-encryption encryption-keygroup 1 spi 1
===============================================================================
Encryption Keygroup Security Association Detail
===============================================================================
Keygroup Id : 1 SPI Id : 1
Install Time : 06/16/2015 11:28:49
Key CRC : 0x36e5af55
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Forwarded Statistics
-------------------------------------------------------------------------------
Encrypted Pkts : 1662534 Encrypted Bytes : 837917136
Decrypted Pkts : 1662333 Decrypted Bytes : 837815832
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Outbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Enqueue Error : 0
Other : 0
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Inbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Authentication Failure : 0
Control Word Mismatch : 0 Padding Error : 0
Enqueue Error : 0 Other : 0
===============================================================================
|
Label |
Description |
|---|---|
|
Encryption Keygroup Configuration Detail |
|
|
Keygroup Id |
The key group identifier |
|
Keygroup Name |
The key group name |
|
Description |
The key group description |
|
Authentication Algo |
The authentication algorithm used for the key group |
|
Encryption Algo |
The encryption algorithm used for the key group |
|
Active Outbound SA |
The active outbound SA for the key group |
|
Activation Time |
The date and time that the key group was activated |
|
Security Associations |
|
|
Spi |
The security parameter index for the SA in the key group |
|
Install Time |
The date and time that the SA was installed in the key group |
|
Key CRC |
The CRC for the key belonging to the SA |
|
Encryption Keygroup Forwarded Statistics |
|
|
Encrypted Pkts |
The number of encrypted packets forwarded by the key group |
|
Encrypted Bytes |
The number of encrypted bytes forwarded by the key group |
|
Decrypted Pkts |
The number of decrypted packets forwarded by the key group |
|
Decrypted Bytes |
The number of decrypted bytes forwarded by the key group |
|
Encryption Keygroup Outbound Discarded Statistics (Pkts) |
|
|
Total Discard |
The total number of outbound packets discarded by the key group |
|
Unsupported Uplink |
The total number of outbound packets discarded by the key group due to an unsupported uplink |
|
Enqueue Error |
The total number of outbound packets discarded by the key group due to an enqueuing error |
|
Other |
The total number of outbound packets discarded by the key group due to some other reason, such as an internal configuration error (for example, a key group that points to an SA, but the SA is not valid) |
|
Encryption Keygroup Inbound Discarded Statistics (Pkts) |
|
|
Total Discard |
The total number of inbound packets discarded by the key group |
|
Invalid Spi |
The total number of inbound packets discarded by the key group due to an invalid SPI |
|
Authentication Failure * |
The total number of inbound packets discarded by the key group due to an authorization failure |
|
Control Word Mismatch |
The total number of inbound packets discarded by the key group due to a control word (CW) mismatch between the encrypted (protected) CW in the ESP payload and the CW that is not encrypted |
|
Padding Error |
The total number of inbound packets discarded by the key group due to a padding error |
|
Enqueue Error |
The total number of inbound packets discarded by the key group due to an enqueuing error |
|
Other |
The total number of inbound packets discarded by the key group due to some other reason (for example, an incoming packet length is incorrect) |
|
SDP Keygroup Association Table |
|
|
SDP ID |
The SDP ID |
|
Direction |
The direction in which key group authentication and encryption occurs for traffic on the SDP |
|
Inbound Keygroup SDP Association Count |
The number of SDPs configured to use inbound SA |
|
Outbound Keygroup SDP Association Count |
The number of SDPs configured to use outbound SA |
|
VPRN Keygroup Association Table |
|
|
VPRN SVC ID |
The VPRN service identifier |
|
Direction |
The direction in which key group authentication and encryption occurs for traffic on the VPRN |
|
Inbound Keygroup VPRN Association Count |
The number of VPRNs configured to use inbound SA |
|
Outbound Keygroup VPRN Association Count |
The number of VPRNs configured to use outbound SA |
encryption-keygroup
Syntax
encryption-keygroup keygroup-id
encryption-keygroup keygroup-id spi spi
Context
[Tree] (clear>grp-encryp encryption-keygroup)
Full Context
clear group-encryption encryption-keygroup
Description
This command clears NGE information for a key group.
Parameters
- keygroup-id
-
Specifies the key group identifier.
- spi
-
Specifies the SPI ID.
Platforms
7705 SAR Gen 2
endpoint
endpoint
Syntax
endpoint [endpoint-name]
Context
[Tree] (show>service>id endpoint)
Full Context
show service id endpoint
Description
This command displays service endpoint information.
Parameters
- endpoint-name
-
Specifies the name of an existing endpoint for the service.
Platforms
7705 SAR Gen 2
Output
The following output is an example of service endpoint information and Output fields: service endpoint describes the output fields.
Output Exampleshow service id 6 endpoint===============================================================================
Service 6 endpoints
===============================================================================
Endpoint name : x
Revert time : 0
Act Hold Delay : 0
Tx Active : none
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
Endpoint name : y
Revert time : 0
Act Hold Delay : 0
Tx Active : none
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
show service id 505 endpoint "access" ===============================================================================
Service 505 endpoints
===============================================================================
Endpoint name : access
Description : (Not Specified)
Creation Origin : manual
Revert time : 0
Act Hold Delay : 0
Standby Signaling Master : false
Standby Signaling Slave : false
Tx Active : lag-1:505
Tx Active Up Time : 0d 00:00:00
Revert Time Count Down : never
Tx Active Change Count : 0
Last Tx Active Change : 09/02/2024 13:25:46
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
SAP : lag-1:505 Oper Status: Up
SAP : lag-1:506 Oper Status: Down
===============================================================================
| Label | Description |
|---|---|
|
Service <ID> endpoints |
|
|
Endpoint name |
Displays the endpoint name |
|
Description |
Displays the endpoint description |
|
Creation Origin |
Displays the creation origin method |
|
Revert time |
Displays the revert time value |
|
Act Hold Delay |
Displays the active hold delay value |
|
Standby Signaling Master |
Displays the standby signaling master status |
|
Standby Signaling Slave |
Displays the standby signaling slave status |
|
Tx Active |
Displays the active SAP ID |
|
Tx Active Up Time |
Displays the active up time |
|
Revert Time Count Down |
Displays the revert time countdown status |
|
Tx Active Change Count |
Displays the number of active changes |
|
Last Tx Active Change |
Displays the date and time of last active change |
|
Members |
|
|
SAP |
Displays the SAP ID |
|
Oper Status |
Displays the operational status |
entry
entry
Syntax
entry entry-id
Context
[Tree] (tools>perform>filter>ip-filter entry)
Full Context
tools perform filter ip-filter entry
Description
Commands in this context perform IP filter entry operations.
Parameters
- entry-id
-
Specifies a particular entry ID.
Platforms
7705 SAR Gen 2
entry
Syntax
entry entry-id
Context
[Tree] (tools>perform>filter>ipv6-filter entry)
Full Context
tools perform filter ipv6-filter entry
Description
Commands in this context perform IPv6 filter entry operations.
Parameters
- entry-id
-
Specifies a particular entry ID.
Platforms
7705 SAR Gen 2
epipe
epipe
Syntax
epipe
Context
[Tree] (show>service>id epipe)
Full Context
show service id epipe
Description
This command displays Epipe services associated with the B-VPLS service. The command only applies when the service is a B-VPLS.
Platforms
7705 SAR Gen 2
Output
The following output is an example of Epipe service information.
Output Example*A:term17>show>service>id# epipe
===============================================================================
Related Epipe services for bVpls service 2000
===============================================================================
Epipe SvcId Oper ISID Admin Oper
-------------------------------------------------------------------------------
100 100 Down Down
-------------------------------------------------------------------------------
Number of Entries : 1
-------------------------------------------------------------------------------
*A:term17>show>service>id#
epipe-map-access-to-egress-port
epipe-map-access-to-egress-port
Syntax
epipe-map-access-to-egress-port service service-id [end-service service-id] | lag lag-id summary
Context
[Tree] (tools>dump epipe-map-access-to-egress-port)
Full Context
tools dump epipe-map-access-to-egress-port
Description
This command will display the egress port that will be used to transmit traffic associated with the displayed Epipe service(s). The information displayed shows the egress port for traffic traveling from SAP to egress SDP or SAP.
This command will support Epipe services with the following combinations:
-
SAP to SDP (with no endpoint configuration)
-
SAP to SAP (with or without an ICB)
-
SAP to SDP using endpoints with 1 or 2 SDPs
The command can be executed by specifying either a service ID, service-ID range or an ingress LAG ID.
This command will not display the egress port for traffic traveling from the SDP to egress SAP. This command also does not work with services that use policers or shared queues and also does not support PBB services.
This command replaces the command tools dump epipe-map-to-network, which has been deprecated.
Parameters
- service service-id
-
Identifies the service ID for which the command will return the egress port. If used in conjunction with the end-service parameter, this value represent the beginning of the service ID range for which the command will be executed against.
- end-service service-id
-
This parameter is used to identify the end of the service ID range for which the command will be executed against.
- lag-id
-
This parameter caused the command to return the egress port for all service with SAPs associated with the specified LAG ID.
Platforms
7705 SAR Gen 2
error-counters
error-counters
Syntax
error-counters
Context
[Tree] (tools>dump>test-oam>twamp>server error-counters)
Full Context
tools dump test-oam twamp server error-counters
Description
This command dumps various error counters related to TWAMP server and TWAMP test.
Platforms
7705 SAR Gen 2
Output
The following output is an example of various error counters related to TWAMP server and TWAMP test.
Output Exampletools>dump>test-oam>twamp>server# error-counters
Dropped Connection Stats
------------------------
TCP connection closed : 0
TCP connection error : 0
Unexpected event : 0
Error sending message : 0
Error waiting for message : 0
Connection not in a prefix : 0
Max global limit : 0
Max prefix limit : 0
No mode specified : 0
Unsupported mode : 0
Invalid command : 0
Stop-sessions with bad session count : 0
Connection timeout : 0
Internal resource : 0
Invalid zero SID : 0
Invalid HMAC : 0
Dropped Connection States
-------------------------
Idle : 0
Set-up-wait : 0
Started : 0
Active : 0
Process Start : 0
Process Stop : 0
Process TW-session : 0
Rejected Session Stats
----------------------
Invalid address version: 0
Non-local destination : 0
Bad type-p : 0
Padding too big : 0
MBZ value is non-zero : 0
SID is non-zero : 0
Timeout too large : 0
Max global sessions : 0
Max prefix sessions : 0
Socket error : 0
Source unreachable : 0
Port in use : 0
Duplicate session : 0
Internal resource : 0
REFWAIT timeout : 0
Dropped Test Packet Stats
-------------------------
Packet wrong size : 0
Wrong source address : 0
Arrived before start time : 0
No Start-sessions : 0
Invalid error estimate : 0
Error sending reply : 0
Invalid Server Octets : 0
Invalid Symmetric MBZ : 0
est-profile
est-profile
Syntax
est-profile [name]
Context
[Tree] (show>certificate est-profile)
Full Context
show certificate est-profile
Description
This command displays EST profile information. If a profile name is not specified, the command displays information about all the EST profiles.
Parameters
- name
-
Specifies an existing EST profile name, up to 32 characters.
Platforms
7705 SAR Gen 2
Output
The following output is an example of the show certificate est-profile command
Output Example*A:cses-V27# show certificate est-profile
===============================================================================
EST Profile Server
Address:Port
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of EST Profiles: 0
===============================================================================
eth
eth
Syntax
eth
Context
[Tree] (tools>perform>service>id>loopback eth)
Full Context
tools perform service id loopback eth
Description
Commands in this context configure a loopback on Ethernet SAPs or MPLS SDP bindings.
Platforms
7705 SAR Gen 2
eth-seg
eth-seg
Syntax
eth-seg [hunt | detail] [rd rd] [community comm-id] [originator-ip ip-address | ipv6-address] [next-hop next-hop] [esi esi] [aspath-regex reg-exp]
Context
[Tree] (show>router>bgp>routes>evpn eth-seg)
Full Context
show router bgp routes evpn eth-seg
Description
This command displays BGP-EVPN Ethernet Segment (ES) routes.
Parameters
- hunt
-
Displays entries for the specified route.
- detail
-
Displays detailed information.
- rd
-
Displays information for the route distinguisher.
- comm-id
-
Specifies community ID, up to 72 characters.
- ip-address | ipv6-address
-
Specifies the IPv4 or IPv6 originator address, up to 64 characters.
- next-hop
-
Specifies the IPv4 or IPv6 BGP next-hop address.
- esi
-
Specifies a 10-byte ESI by which to filter the displayed information. For example,ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators('-',':',' ')
- reg-exp
-
Displays routes matching the specified regular expression, up to 80 characters.
Platforms
7705 SAR Gen 2
ethernet
ethernet
Syntax
ethernet
Context
[Tree] (clear>port ethernet)
Full Context
clear port ethernet
Description
Commands in this context clear Ethernet port statistics.
Platforms
7705 SAR Gen 2
ethernet
Syntax
ethernet
ethernet associations
ethernet [detail]
Context
[Tree] (show>port ethernet)
Full Context
show port ethernet
Description
Commands in this context display Ethernet port information.
Parameters
- associations
-
Displays Ethernet port associations.
- detail
-
Displays detailed information.
Platforms
7705 SAR Gen 2
ethernet-segment
ethernet-segment
Syntax
ethernet-segment [name]
Context
[Tree] (show>service>sdp-using ethernet-segment)
Full Context
show service sdp-using ethernet-segment
Description
This command displays Ethernet Segment information associated with SDPs.
Parameters
- name
-
Specifies the Ethernet segment name, up to 32 characters.
Platforms
7705 SAR Gen 2
etree
etree
Syntax
etree
Context
[Tree] (show>service>id etree)
Full Context
show service id etree
Description
This command displays the same information shown in the show service ID base context, with the addition of the role of each object in the VPLS E-Tree service.
The following labels identify the configuration of the SAPs and SDP bindings:
-
(L) indicates leaf-ac
-
(RL) indicates root-leaf-tag
Platforms
7705 SAR Gen 2
Output
The following output is an example of VPLS E-Tree information.
Output Example*A:PE-6# show service id 2005 etree
===============================================================================
Service Basic Information
===============================================================================
Service Id : 2005 Vpn Id : 0
Service Type : VPLS
Name : etree-2005
Description : (Not Specified)
Customer Id : 1 Creation Origin : manual
Last Status Change: 05/08/2018 09:49:54
Last Mgmt Change : 05/08/2018 09:51:09
Etree Mode : Enabled
Admin State : Up Oper State : Up
MTU : 1514
SAP Count : 2 SDP Bind Count : 1
Snd Flush on Fail : Disabled Host Conn Verify : Disabled
SHCV pol IPv4 : None
Propagate MacFlush: Disabled Per Svc Hashing : Disabled
Allow IP Intf Bind: Disabled
Fwd-IPv4-Mcast-To*: Disabled Fwd-IPv6-Mcast-To*: Disabled
Mcast IPv6 scope : mac-based
Def. Gateway IP : None
Def. Gateway MAC : None
Temp Flood Time : Disabled Temp Flood : Inactive
Temp Flood Chg Cnt: 0
SPI load-balance : Disabled
TEID load-balance : Disabled
Src Tep IP : N/A
Vxlan ECMP : Disabled
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:1/1/c1/1:2005 (L) q-tag 9000 9000 Up Up
sap:1/1/c1/1:2006 (RL) q-tag 9000 9000 Up Up
sdp:65:2005 (RL) S(192.0.2.5) Spok 0 8974 Up Down
-------------------------------------------------------------------------------
Legend: (L): Leaf-Ac, (RL): Root-Leaf-Tag
===============================================================================
* indicates that the corresponding row element may have been truncated.
event-control
event-control
Syntax
event-control [application-id [event-name | event-number]]
event-control application-id event-name detail
Context
[Tree] (show>log event-control)
Full Context
show log event-control
Description
This command displays event control settings for events including whether the event is suppressed or generated and the severity level for the event.
If no options are specified all events, alarms and traps are listed.
Parameters
- application-id
-
Only displays event control for the specified application.
- event-name
-
Only displays event control for the named application event, up to 32 characters.
- event-number
-
Only displays event control for the specified application event number.
Platforms
7705 SAR Gen 2
Output
The following output is an example of event control information.
Output fields: event control describes the output fields for the event control.
Output ExampleA:gal171# show log event-control
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
BGP:
2001 bgpEstablished MI gen 0 0
2002 bgpBackwardTransition WA gen 0 0
2003 tBgpMaxPrefix90 WA gen 0 0
2004 tBgpMaxPrefix100 CR gen 0 0
L 2005 sendNotification WA gen 0 0
L 2006 receiveNotification WA gen 0 0
L 2007 bgpInterfaceDown WA gen 0 0
L 2008 bgpConnNoKA WA gen 0 0
L 2009 bgpConnNoOpenRcvd WA gen 0 0
L 2010 bgpRejectConnBadLocAddr WA gen 0 0
L 2011 bgpRemoteEndClosedConn WA gen 0 0
L 2012 bgpPeerNotFound WA gen 0 0
L 2013 bgpConnMgrTerminated WA gen 0 0
L 2014 bgpTerminated WA gen 0 0
L 2015 bgpNoMemoryPeer CR gen 0 0
L 2016 bgpVariableRangeViolation WA gen 0 0
L 2017 bgpCfgViol WA gen 0 0
CFLOWD:
2001 cflowdCreated MI gen 0 0
2002 cflowdCreateFailure MA gen 0 0
2003 cflowdDeleted MI gen 0 0
2004 cflowdStateChanged MI gen 0 0
2005 cflowdCleared MI gen 0 0
2006 cflowdFlowCreateFailure MI gen 0 0
2007 cflowdFlowFlushFailure MI gen 0 0
2008 cflowdFlowUnsuppProto MI sup 0 0
CCAG:
CHASSIS:
2001 cardFailure MA gen 0 0
2002 cardInserted MI gen 4 0
2003 cardRemoved MI gen 0 0
2004 cardWrong MI gen 0 0
2005 EnvTemperatureTooHigh MA gen 0 0
...
DEBUG:
L 2001 traceEvent MI gen 0 0
DOT1X:
FILTER:
2001 filterPBRPacketsDropped MI gen 0 0
IGMP:
2001 vRtrIgmpIfRxQueryVerMismatch WA gen 0 0
2002 vRtrIgmpIfCModeRxQueryMismatch WA gen 0 0
IGMP_SNOOPING:
IP:
L 2001 clearRTMError MI gen 0 0
L 2002 ipEtherBroadcast MI gen 0 0
L 2003 ipDuplicateAddress MI gen 0 0
L 2004 ipArpInfoOverwritten MI gen 0 0
L 2005 fibAddFailed MA gen 0 0
L 2006 qosNetworkPolicyMallocFailed MA gen 0 0
L 2007 ipArpBadInterface MI gen 0 0
L 2008 ipArpDuplicateIpAddress MI gen 0 0
L 2009 ipArpDuplicateMacAddress MI gen 0 0
ISIS:
2001 vRtrIsisDatabaseOverload WA gen 0 0
2002 vRtrIsisManualAddressDrops WA gen 0 0
2003 vRtrIsisCorruptedLSPDetected WA gen 0 0
2004 vRtrIsisMaxSeqExceedAttempt WA gen 0 0
2005 vRtrIsisIDLenMismatch WA gen 0 0
2006 vRtrIsisMaxAreaAddrsMismatch WA gen 0 0
....
USER:
L 2001 cli_user_login MI gen 2 0
L 2002 cli_user_logout MI gen 1 0
L 2003 cli_user_login_failed MI gen 0 0
L 2004 cli_user_login_max_attempts MI gen 0 0
L 2005 ftp_user_login MI gen 0 0
L 2006 ftp_user_logout MI gen 0 0
L 2007 ftp_user_login_failed MI gen 0 0
L 2008 ftp_user_login_max_attempts MI gen 0 0
L 2009 cli_user_io MI sup 0 48
L 2010 snmp_user_set MI sup 0 0
L 2011 cli_config_io MI gen 4357 0
VRRP:
2001 vrrpTrapNewMaster MI gen 0 0
2002 vrrpTrapAuthFailure MI gen 0 0
2003 tmnxVrrpIPListMismatch MI gen 0 0
2004 tmnxVrrpIPListMismatchClear MI gen 0 0
2005 tmnxVrrpMultipleOwners MI gen 0 0
2006 tmnxVrrpBecameBackup MI gen 0 0
L 2007 vrrpPacketDiscarded MI gen 0 0
VRTR:
2001 tmnxVRtrMidRouteTCA MI gen 0 0
2002 tmnxVRtrHighRouteTCA MI gen 0 0
2003 tmnxVRtrHighRouteCleared MI gen 0 0
2004 tmnxVRtrIllegalLabelTCA MA gen 0 0
2005 tmnxVRtrMcastMidRouteTCA MI gen 0 0
2006 tmnxVRtrMcastMaxRoutesTCA MI gen 0 0
2007 tmnxVRtrMcastMaxRoutesCleared MI gen 0 0
2008 tmnxVRtrMaxArpEntriesTCA MA gen 0 0
2009 tmnxVRtrMaxArpEntriesCleared MI gen 0 0
2011 tmnxVRtrMaxRoutes MI gen 0 0
=======================================================================
A:ALA-1#
A:ALA-1# show log event-control ospf
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
2001 ospfVirtIfStateChange WA gen 0 0
2002 ospfNbrStateChange WA gen 1 0
2003 ospfVirtNbrStateChange WA gen 0 0
2004 ospfIfConfigError WA gen 0 0
2005 ospfVirtIfConfigError WA gen 0 0
2006 ospfIfAuthFailure WA gen 0 0
2007 ospfVirtIfAuthFailure WA gen 0 0
2008 ospfIfRxBadPacket WA gen 0 0
2009 ospfVirtIfRxBadPacket WA gen 0 0
2010 ospfTxRetransmit WA sup 0 0
2011 ospfVirtIfTxRetransmit WA sup 0 0
2012 ospfOriginateLsa WA sup 0 404
2013 ospfMaxAgeLsa WA gen 3 0
2014 ospfLsdbOverflow WA gen 0 0
2015 ospfLsdbApproachingOverflow WA gen 0 0
2016 ospfIfStateChange WA gen 2 0
2017 ospfNssaTranslatorStatusChange WA gen 0 0
2018 vRtrOspfSpfRunsStopped WA gen 0 0
2019 vRtrOspfSpfRunsRestarted WA gen 0 0
2020 vRtrOspfOverloadEntered WA gen 1 0
2021 vRtrOspfOverloadExited WA gen 0 0
2022 ospfRestartStatusChange WA gen 0 0
2023 ospfNbrRestartHelperStatusChange WA gen 0 0
2024 ospfVirtNbrRestartHelperStsChg WA gen 0 0
=======================================================================
A:ALA-1#
A:ALA-1# show log event-control ospf ospfVirtIfStateChange
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
2001 ospfVirtIfStateChange WA gen 0 0
=======================================================================
A:ALA-1#
A:dut-c# show log event-control "BGP" tBgpMaxNgPfxLmtThresholdReached detail
===============================================================================
Log event "tBgpMaxNgPfxLmtThresholdReached"
===============================================================================
Severity : major
Generated : true
Count : 0
Drop count : 1
Throttle : false
Specific throttle : false
Specific throttle limit : 0
Specific throttle interval (s) : 0
Specific throttle by default : false
Specific throttle limit default : 0
Specific throttle interval default(s) : 0
Repeat : false
Source stream : mainA:node-2# show log event-control "mgmt_core"
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
L 2001 mdConfigChange MI sup 0 197
L 2002 mdOcConfigChange MI sup 0 0
L 2003 mdBofConfigChange MI sup 0 23
L 2004 mdDebugConfigChange MI sup 0 0
=======================================================================
|
Label |
Description |
|---|---|
|
Application |
The application name. |
|
ID# |
The event ID number within the application. L ID# An "L” in front of an ID represents event types that do not generate an associated SNMP notification. Most events do generate a notification, only the exceptions are marked with a preceding "L”. |
|
Event Name |
The event name. |
|
P |
CL — The event has a cleared severity or priority. CR — The event has critical severity or priority. IN — The event has indeterminate severity or priority. MA — The event has major severity or priority. MI — The event has minor severity or priority. WA — The event has warning severity or priority. |
|
g/s |
gen — The event will be generated or logged by event control. sup — The event will be suppressed or dropped by event control. thr — Specifies that throttling is enabled. |
|
Logged |
The number of events logged or generated. |
|
Dropped |
The number of events dropped/suppressed. |
|
Severity |
The severity level of the event (cleared, indeterminate, critical, major, minor, or warning). |
|
Generated |
Indicates whether the log event is enabled (true) or suppressed (false). |
|
Count |
The number of events logged or generated. |
|
Drop count |
The number of events dropped/suppressed. |
|
Throttle |
Indicates whether the event is subject to global throttling (true or false). |
|
Specific throttle |
Indicates whether the event is subject to specific per event throttling (true or false). |
|
Specific throttle limit |
The configured number of events per interval for specific throttling. |
|
Specific throttle interval (s) |
The configured interval over which the specific throttling limit is applied. |
|
Specific throttle by default |
Indicates whether the specific throttling is enabled or not when it has not been explicitly configured. |
|
Specific throttle limit default |
The default number of events per-interval for specific throttling of this event. |
|
Specific throttle interval default (s) |
The default interval over which the specific default throttling limit is applied. |
|
Repeat |
Specifies that the log event should be repeated every minute until the underlying condition is cleared. |
|
Source stream |
Specifies the event source (main, security, change, debug or li). |
event-handling
event-handling
Syntax
event-handling
Context
[Tree] (show>log event-handling)
Full Context
show log event-handling
Description
Commands in this context display Event Handling System (EHS) information.
Platforms
7705 SAR Gen 2
event-handling
Syntax
event-handling
Context
[Tree] (clear>log event-handling)
Full Context
clear log event-handling
Description
Commands in this context clear Event Handling System (EHS) information.
Platforms
7705 SAR Gen 2
event-parameters
event-parameters
Syntax
event-parameters [application-id [event-name | event-number]]
Context
[Tree] (show>log event-parameters)
Full Context
show log event-parameters
Description
This command displays an event's (or all events) common parameters and specific parameters. This allows a user to know what parameters can be passed from a triggering event to the triggered EHS script.
There is a common event parameter for all log events called 'timestamp' that contains the same information as 'gentime’, but in a different format and unit. The 'timestamp' parameter is only available to python3 applications.
Parameters
- application-id
-
Displays event parameters for the specified application.
- event-name
-
Displays event parameters for the named application event up to 32 characters in length.
- event-number
-
Displays event parameters for the specified application event number.
Platforms
7705 SAR Gen 2
Output
The following output is an example of log event parameter information.
Output Example# show log event-parameters "oam" 2001
=======================================================================
Common Event Parameters
appid
name
eventid
severity
subject
gentime
Event Specific Parameters
tmnxOamPingCtlOwnerIndex
tmnxOamPingCtlTestIndex
tmnxOamPingCtlTgtAddrType
tmnxOamPingCtlTgtAddress
tmnxOamPingResultsTestRunIndex
tmnxOamPingResultsOperStatus
tmnxOamPingResultsMinRtt
tmnxOamPingResultsMaxRtt
tmnxOamPingResultsAverageRtt
tmnxOamPingResultsRttSumOfSquares
tmnxOamPingResultsRttOFSumSquares
tmnxOamPingResultsMtuResponseSize
tmnxOamPingResultsSvcPing
tmnxOamPingResultsProbeResponses
tmnxOamPingResultsSentProbes
tmnxOamPingResultsLastGoodProbe
tmnxOamPingCtlTestMode
tmnxOamPingHistoryIndex
=======================================================================
evpn
evpn
Syntax
evpn mac-dup-detect ieee-address
evpn mac-dup-detect all
Context
[Tree] (clear>service>id evpn)
Full Context
clear service id evpn
Description
This command clears a duplicate MAC and restarts the MAC duplication process. It also clears black-hole MACs.
Parameters
- ieee-address
-
Specifies the MAC address, up to 30 characters.
- all
-
Specifies that the clear command applies to all duplicate MACs.
Platforms
7705 SAR Gen 2
evpn
Syntax
evpn usage
Context
[Tree] (tools>dump>service evpn)
Full Context
tools dump service evpn
Description
This command displays the consumed EVPN resources in the system. The VXLAN destinations include static VXLAN destinations as well as Ethernet Segment (ES) VXLAN destinations.
Platforms
7705 SAR Gen 2
Output
The following output is an example of consumed EVPN resources information and, Output fields: EVPN usage describes the output fields.
Output ExampleA:PE-2# tools dump service evpn usage
vxlan-srv6-evpn-mpls usage statistics at 05/24/2024 11:23:38:
MPLS-TEP : 0
VXLAN-TEP : 0
SRV6-TEP : 5
Total-TEP : 5/ 16383
Mpls Dests (TEP, Egress Label + ES + ES-BMAC) : 0
Mpls Etree Leaf Dests : 0
Vxlan Dests (TEP, Egress VNI + ES) : 0
Srv6 Dests (TEP, SID + ES) : 7
Total-Dest : 7/196607
Sdp Bind + Evpn Dests : 7/245759
ES L2/L3 PBR : 0/ 32767
Evpn Etree Remote BUM Leaf Labels : 0
Evpn Etree MLDP Leaf Intf : 0/ 4096
EVPN ES Labels on MLDP Leaf Intf : 0/ 16380|
Label |
Description |
|---|---|
|
MPLS-TEP |
Specifies the number of MPLS tunnel endpoints (TEPs) |
|
VXLAN-TEP |
Specifies the number of VXLAN TEPs |
|
SRV6-TEP |
Specifies the number of SRv6 TEPs |
|
Total-TEP |
Specifies the total number of TEPs |
|
Mpls Dests (TEP, Egress Label + ES + ES-BMAC) |
Specifies the number of MPLS destinations |
|
Mpls Etree Leaf Dests |
Specifies the number of MPLS E-Tree leaf destinations |
|
Vxlan Dests (TEP, Egress VNI + ES) |
Specifies the number of VXLAN destinations |
|
Srv6 Dests (TEP, SID + ES) |
Specifies the number of SRv6 destinations |
|
Total-Dest |
Specifies the total number of destinations |
|
Sdp Bind + Evpn Dests |
Specifies the number of SDP bind and EVPN destinations |
|
ES L2/L3 PBR |
Specifies the number of elementary stream (ES) Layer 2 or Layer 3 policy-based routing (PBR) |
|
Evpn Etree Remote BUM Leaf Labels |
Specifies the number of EVPN E-Tree remote BUM leaf labels |
|
EVPN Etree MLDP Leaf Intf |
Specifies the number of mLDP interfaces on an mLDP Leaf (receiving P2MP traffic) where the interfaces are part of EVPN E-Tree services. Leaf, in this context, refers to mLDP leaf. This number also refers to the number of roots in E-Tree services that are joinable from an mLDP leaf (for example, the number of mLDP leaf interfaces). Since each root joined potentially causes an E-Tree leaf label from that root to be programmed against the mLDP leaf, it implicitly also indicates the number of programable labels. An entry here is counted as soon as an mLDP leaf is created in an E-Tree service. |
|
EVPN ES Labels on MLDP Leaf Intf |
Specifies the number of upstream ES labels programmed against mLDP leafs. This does not include unique upstream ES labels since these labels must be programmed on all mLDP leafs joining a specific root PE. |
evpn
Syntax
evpn evpn-type
Context
[Tree] (show>router>bgp>routes evpn)
Full Context
show router bgp routes evpn
Description
Commands in this context displays BGP EVPN routes.
Platforms
7705 SAR Gen 2
evpn
Syntax
evpn usage
Context
[Tree] (tools>dump>service>id evpn)
Full Context
tools dump service id evpn
Description
This command shows the maximum number of EVPN-tunnel interface IP next hops per R-VPLS as well as the current usage for a specified R-VPLS service.
Platforms
7705 SAR Gen 2
Output
The following output is an example of tools dump EVPN usage information.
Output Example*A:PE71# tools dump service id 504 evpn usage
Evpn Tunnel Interface IP Next Hop: 1/8189
evpn-l2-oper-attrs
evpn-l2-oper-attrs
Syntax
evpn-l2-oper-attrs
Context
[Tree] (show>service>id>bgp-evpn evpn-l2-oper-attrs)
Full Context
show service id bgp-evpn evpn-l2-oper-attrs
Description
This command displays information of all the TEPs for which the peer advertised a Layer 2 extended community.
Platforms
7705 SAR Gen 2
Output
The following command displays an example of all the TEPs for which the peer advertised a Layer 2 extended community and Output fields: EVPN Layer 2 TEP describes the output fields.
Output Exampleshow service id 110 bgp-evpn evpn-l2-oper-attrs ===============================================================================
EVPN P2MP L2 Attributes
===============================================================================
TEP Address Oper State Oper Flags
-------------------------------------------------------------------------------
192.0.2.4 Down no-L2-comm
2001:db8::2 Up None
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
===============================================================================
|
Label |
Description |
|---|---|
|
EVPN P2MP L2 Attributes |
|
|
TEP Address |
The TEP address |
|
Oper State |
The operational state |
|
Oper Flags |
The operational flags |
|
Number of entries |
The total number of matching entries |
evpn-mpls
evpn-mpls
Syntax
evpn-mpls [tep-ip-address]
Context
[Tree] (show>service evpn-mpls)
Full Context
show service evpn-mpls
Description
This command shows the remote EVPN-MPLS tunnel endpoints in the system.
Parameters
- tep-ip-address
-
Specifies the IP address of a tunnel endpoint.
Platforms
7705 SAR Gen 2
Output
Output Example*A:PE70(4)# show service evpn-mpls
===============================================================================
EVPN MPLS Tunnel Endpoints
===============================================================================
EvpnMplsTEP Address EVPN-MPLS Dest ES Dest ES BMac Dest
-------------------------------------------------------------------------------
192.0.2.69 3 1 1
192.0.2.71 2 0 0
192.0.2.72 3 1 1
192.0.2.73 2 1 0
192.0.2.254 1 0 0
-------------------------------------------------------------------------------
Number of EvpnMpls Tunnel Endpoints: 5
-------------------------------------------------------------------------------
===============================================================================
*A:PE70(4)# show service evpn-mpls
<TEP ip-address>
192.0.2.69 192.0.2.71 192.0.2.72 192.0.2.73 192.0.2.254
*A:PE70(4)# show service evpn-mpls 192.0.2.69
===============================================================================
BGP EVPN-MPLS Dest
===============================================================================
Service Id Egr Label
-------------------------------------------------------------------------------
1 262140
1 262141
20000 262138
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest
===============================================================================
Service Id Eth Seg Id Egr Label
-------------------------------------------------------------------------------
1 01:00:00:00:00:71:00:00:00:01 262141
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN-MPLS ES BMac Dest
===============================================================================
Service Id ES BMac Egr Label
-------------------------------------------------------------------------------
20000 00:00:00:00:71:71 262138
-------------------------------------------------------------------------------
===============================================================================
evpn-mpls
Syntax
evpn-mpls esi esi [detail]
evpn-mpls esi esi instance instance-id [detail]
evpn-mpls es-bmac ieee-address
evpn-mpls [detail]
evpn-mpls instance instance-id [detail]
evpn-mpls fxc [sap sap-id]
Context
[Tree] (show>service>id evpn-mpls)
Full Context
show service id evpn-mpls
Description
This command displays the existing EVPN-MPLS destinations for a specified service and all related information. The command allows filtering based on esi (for EVPN multihoming) and es-bmac (for PBB-EVPN multihoming) to display the EVPN-MPLS destinations associated to an Ethernet Segment Identifier (ESI).
Parameters
- esi
-
Specifies a 10-byte ESI by which to filter the displayed information. For example, ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators ('-',':',' ')
- ieee-address
-
Specifies a 48-bit MAC address for which to display information. The parameter is entered in the form xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx, where xx represents a hexadecimal number.
- instance-id
-
Specifies the instance ID.
- detail
-
Keyword that displays detailed information.
- fxc
-
Keyword that displays Flexible Cross Connect (FXC) information.
- sap-id
-
Specifies the port ID portion of the SAP definition.
Platforms
7705 SAR Gen 2
Output
The following output is an example of EVPN MPLS information, and Output fields: service EVPN-MPLS describes the output fields.
Output Exampleshow service id 110 evpn-mpls BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address Transport:Tnl Egr Label Oper Mcast Num
State MACs
-------------------------------------------------------------------------------
2001:db8::2 ldp:65542 524244 Up bum 0
2001:db8::3 ldp:65540 524250 Up bum 0
-------------------------------------------------------------------------------
Number of entries : 2
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00 1 02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
show service id 110 evpn-mpls detail ===============================================================================
BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address Transport:Tnl Egr Label Oper Mcast Num
State MACs
-------------------------------------------------------------------------------
2001:db8::2 ldp:65542 524244 Up bum 0
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/02/2023 12:44:07
2001:db8::3 ldp:65540 524250 Up bum 0
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/02/2023 12:44:07
-------------------------------------------------------------------------------
Number of entries : 2
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00 1 02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
show service id 110 evpn-mpls esi 01:b6:47:ff:00:00:00:00:01:00 detail ===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance: 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00 1 02/02/2023 12:48:43
===============================================================================
===============================================================================
BGP EVPN-MPLS Dest TEP Info (Instance 1)
===============================================================================
TEP Address Egr Label Transport:Tnl- Oper
Id State
-------------------------------------------------------------------------------
2001:db8::2 524246 ldp:65542 Up
Oper Flags : None
Last Update : 02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries : 1
===============================================================================
show service id 20000 evpn-mpls es-bmac 00:00:00:00:71:71===============================================================================
BGP EVPN-MPLS ES BMAC Dest
===============================================================================
vBmacAddr Num. Macs Last Change
-------------------------------------------------------------------------------
00:00:00:00:71:71 1 07/15/2015 19:44:10
===============================================================================
===============================================================================
BGP EVPN-MPLS ES BMAC Dest TEP Info
===============================================================================
TEP Address Egr Label Last Change
Transport
-------------------------------------------------------------------------------
192.0.2.69 262138 07/15/2015 19:44:10
ldp
-------------------------------------------------------------------------------
Number of entries : 1
-------------------------------------------------------------------------------
===============================================================================
show service id 100 evpn-mpls===============================================================================
BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address Egr Label Num Saps Last Change
Transport:Tnl-id
-------------------------------------------------------------------------------
10.20.1.2 524285 3 08/15/2023 23:18:50
ldp:65543
10.20.1.2 524286 2 08/15/2023 23:18:50
ldp:65543
10.20.1.3 524285 1 08/15/2023 23:18:50
ldp:50000
-------------------------------------------------------------------------------
Number of entries : 3
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num Saps Last Change
-------------------------------------------------------------------------------
00:00:11:11:00:00:11:11:11:11 1 08/15/2023 23:18:50
00:00:11:11:00:00:11:11:22:22 1 08/15/2023 23:18:50
-----------------------------------------------------------------------------------
Number of entries : 2
===============================================================================
show service id 505 evpn-mpls===============================================================================
BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address Egr Label Num Last Change
Transport:Tnl-id Saps
-------------------------------------------------------------------------------
2001:db8::4 524271 1 09/02/2024 15:23:38
ldp:65538
2001:db8::4 524272 1 09/02/2024 14:58:23
ldp:65538
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN-MPLS Dest (Instance 2)
===============================================================================
TEP Address Egr Label Num Last Change
Transport:Tnl-id Saps
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num Saps Last Change
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 2)
===============================================================================
Eth SegId Num Saps Last Change
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
show service id 505 evpn-mpls fxc ===============================================================================
FXC SAP Connections (Instance 1)
===============================================================================
Dest Identifier Sap (Normalized Tags) Last Change
Transport:Tnl-id
-------------------------------------------------------------------------------
mpls-1:2001:db8::4:524271 lag-1:506 (556.556) 09/02/2024
16:59:30
ldp:65538
mpls-1:2001:db8::4:524272 lag-1:505 (555) 09/02/2024
16:59:30
ldp:65538
-------------------------------------------------------------------------------
Number of Entries : 2
-------------------------------------------------------------------------------
===============================================================================
The following table describes the EVPN-MPLS output fields.
|
Label |
Description |
|---|---|
|
vBmacAddr |
Displays the vBmac address |
|
Num. Macs |
Displays the number of MACs |
|
Last Change |
Indicates the time of the most recent state changes |
|
TEP Address |
Displays the TEP address |
|
Egr Label |
Displays the egress label |
|
Transport |
Displays the transport type |
|
Number of entries |
Indicates the number of entries |
|
Eth SegId |
Displays the Ethernet Segment ID |
|
Transport:Tnl-Id |
Displays the tunnel type and tunnel ID of the EVPN-MPLS entry |
|
Transport:Tnl |
Displays the transport tunnel |
|
Num. MAC |
Displays the number of MACs |
|
Oper State |
Disaplays the operational state |
|
Oper Flags |
Displays the operational flags |
|
Mcast |
Displays the multicast information |
|
Sup BCast Domain |
Displays the Sup BCast Domain |
|
FXC SAP Connections |
|
|
Dest Identifier |
Displays the destination ID |
|
Sap (Normalized Tags) |
Displays the SAP ID |
|
Last Change |
Displays the date and time of the last change |
|
Transport:Tnl-id |
Displays the transport tunnel ID |
|
Number of Entries |
Displays the total number of entries |
expand-wildcard-path
expand-wildcard-path
Syntax
expand-wildcard-path path
Context
[Tree] (tools>dump>system>telemetry expand-wildcard-path)
Full Context
tools dump system telemetry expand-wildcard-path
Description
This command expands XML Paths (XPaths) to include multiple wildcards.
Parameters
- path
-
Specifies the XPath that contains the wildcards.
Platforms
7705 SAR Gen 2
Output
Output Example# tools dump system telemetry expand-wildcard-path "/state/card/.../oper-state"
=======================================================================
Expanded paths
=======================================================================
/state/card[slot-number=*]/hardware-data/oper-state
/state/card[slot-number=*]/mda[mda-slot=*]/hardware-data/oper-state
/state/card[slot-number=*]/mda[mda-slot=*]/flex[group-index=*]/oper-state
=======================================================================
export
export
Syntax
export
Context
[Tree] (clear>router>isis export)
Full Context
clear router isis export
Description
This command re-evaluates route policies participating in the export mechanism, either as importers or exporters of routes.
Platforms
7705 SAR Gen 2
export
export
Syntax
export
Context
[Tree] (clear>router>rip export)
Full Context
clear router rip export
Description
This command re-evaluates RIP export policies.
Platforms
7705 SAR Gen 2
export
Syntax
export
Context
[Tree] (clear>router>ripng export)
Full Context
clear router ripng export
Description
This command re-evaluates RIPng export policies.
Platforms
7705 SAR Gen 2
extranet-interface
extranet-interface
Syntax
extranet-interface
Context
[Tree] (show>router>pim extranet-interface)
Full Context
show router pim extranet-interface
Description
This command displays extranet interface information.
Platforms
7705 SAR Gen 2