Monitor and troubleshoot
Documents under this category provide information about monitoring the 7705 SAR routers and diagnosing and troubleshooting router issues.
- OAM Guide
  This guide describes how to use the Operations, Administration and Management (OAM) and diagnostic tools provided by the 7705 SAR, including how to configure mirroring.
- Log Events Guide
  This guide provides information about the log events for the 7705 SAR.

ATM

atmIfcStatusChange

Table 1. atmIfcStatusChange properties
Property name	Value
Application name	ATM
Event ID	2009
Event name	atmIfcStatusChange
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Status of $subject$ owned by $tAtmIfcInfoOwner$ has changed to administrative state: $tAtmIfcAdminStatus$ operational state: $tAtmIfcOperStatus$
Cause	The state of the ATM interface has changed.
Effect	N/A
Recovery	N/A

atmIlmiPeerVclStatusChange

Table 2. atmIlmiPeerVclStatusChange properties
Property name	Value
Application name	ATM
Event ID	2016
Event name	atmIlmiPeerVclStatusChange
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Status of VCL $atmVclVpi$/$atmVclVci$ on $subject$ has changed to operational state: $atmVclOperStatus$
Cause	The state of the ILMI peer VCL has changed.
Effect	N/A
Recovery	Investigate what caused the new state.

atmIlmiPeerVplStatusChange

Table 3. atmIlmiPeerVplStatusChange properties
Property name	Value
Application name	ATM
Event ID	2017
Event name	atmIlmiPeerVplStatusChange
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Status of VPL $atmVplVpi$ on $subject$ has changed to operational state: $atmVplOperStatus$
Cause	The state of the ILMI peer VPL has changed.
Effect	N/A
Recovery	Investigate what caused the new state.

atmVclStatusChange

Table 4. atmVclStatusChange properties
Property name	Value
Application name	ATM
Event ID	2006
Event name	atmVclStatusChange
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Status of $subject$ owned by $tAtmVclInfoOwner$ has changed to administrative state: $atmVclAdminStatus$ operational state: $atmVclOperStatus$ OAM state: $tAtmVclInfoOamStatus$
Cause	The state of the ATM VCL has changed.
Effect	N/A
Recovery	N/A

atmVplStatusChange

Table 5. atmVplStatusChange properties
Property name	Value
Application name	ATM
Event ID	2007
Event name	atmVplStatusChange
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Status of $subject$ owned by $tAtmVplInfoOwner$ has changed to administrative state: $atmVplAdminStatus$ operational state: $atmVplOperStatus$ OAM state: $tAtmVplInfoOamStatus$
Cause	The state of the ATM VPL has changed.
Effect	N/A
Recovery	N/A

atmVtlStatusChange

Table 6. atmVtlStatusChange properties
Property name	Value
Application name	ATM
Event ID	2008
Event name	atmVtlStatusChange
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Status of $subject$ owned by $tAtmVtlInfoOwner$ has changed to administrative state: $tAtmVtlAdminStatus$ operational state: $tAtmVtlOperStatus$
Cause	The state of the ATM VTL has changed.
Effect	N/A
Recovery	N/A

tAtmEpOutOfPeerVpiOrVciRange

Table 7. tAtmEpOutOfPeerVpiOrVciRange properties
Property name	Value
Application name	ATM
Event ID	2012
Event name	tAtmEpOutOfPeerVpiOrVciRange
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.5
Default severity	warning
Message format string	ATM EPs on ATM interface $subject$ are outside of the negotiated VPI or VCI range
Cause	The tAtmEpOutOfPeerVpiOrVciRange notification is sent whenever an ILMI link becomes operationally up and ATM EPs are configured on the ILMI-managed interface that are outside the VPI or VCI range allowed by the peer.
Effect	N/A
Recovery	Adjust the VPI or VCI range.

tAtmIlmiLinkStatusChange

Table 8. tAtmIlmiLinkStatusChange properties
Property name	Value
Application name	ATM
Event ID	2015
Event name	tAtmIlmiLinkStatusChange
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.8
Default severity	warning
Message format string	Status of ILMI on ATM Interface $subject$ vpi=$tAtmIlmiLinkVpi$ vci=$tAtmIlmiLinkVci$ has changed administrative status: $tAtmIlmiLinkAdminStatus$ operational status: $tAtmIlmiLinkOperStatus$
Cause	The tAtmIlmiLinkStatusChange notification is sent whenever a status change occurs on an ILMI link. This includes changes to the ILMI link's administrative status and the ILMI link's operational status.
Effect	N/A
Recovery	N/A

tAtmMaxPeerVccsExceeded

Table 9. tAtmMaxPeerVccsExceeded properties
Property name	Value
Application name	ATM
Event ID	2013
Event name	tAtmMaxPeerVccsExceeded
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.6
Default severity	warning
Message format string	The number of ATM VCLs on ATM interface $subject$ exceeds the negotiated maximum
Cause	The tAtmMaxPeerVccsExceeded notification is sent whenever an ILMI link becomes operationally up and there are more ATM VCLs configured on the ILMI-managed interface than are supported by the peer.
Effect	N/A
Recovery	N/A

tAtmMaxPeerVpcsExceeded

Table 10. tAtmMaxPeerVpcsExceeded properties
Property name	Value
Application name	ATM
Event ID	2014
Event name	tAtmMaxPeerVpcsExceeded
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.7
Default severity	warning
Message format string	The number of ATM VPLs on ATM interface $subject$ exceeds the negotiated maximum
Cause	The tAtmMaxPeerVpcsExceeded notification is sent whenever an ILMI link becomes operationally up and there are more ATM VPLs configured on the ILMI-managed interface than are supported by the peer.
Effect	N/A
Recovery	N/A

tAtmPlcpSubLayerClear

Table 11. tAtmPlcpSubLayerClear properties
Property name	Value
Application name	ATM
Event ID	2011
Event name	tAtmPlcpSubLayerClear
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.4
Default severity	minor
Message format string	ATM Interface $subject$ entered the no error state
Cause	The tAtmPlcpSubLayerClear notification is generated when the ATM interface has left the far end alarm or incoming LOF error state and entered the no error state.
Effect	N/A
Recovery	N/A

tAtmPlcpSubLayerDown

Table 12. tAtmPlcpSubLayerDown properties
Property name	Value
Application name	ATM
Event ID	2010
Event name	tAtmPlcpSubLayerDown
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.3
Default severity	minor
Message format string	ATM Interface $subject$ entered failure state
Cause	The tAtmPlcpSubLaerDown notification is generated when the ATM interface has left the no error state and entered the far end alarm or incoming LOF state.
Effect	N/A
Recovery	N/A

tAtmTcSubLayerClear

Table 13. tAtmTcSubLayerClear properties
Property name	Value
Application name	ATM
Event ID	2005
Event name	tAtmTcSubLayerClear
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.2
Default severity	minor
Message format string	ATM Interface $subject$ entered the LCD no error state
Cause	The tAtmTcSubLayerClear notification is generated when the ATM interface has left the Loss of Cell Delineation (LCD) error state and entered the LCD no error state.
Effect	N/A
Recovery	N/A

tAtmTcSubLayerDown

Table 14. tAtmTcSubLayerDown properties
Property name	Value
Application name	ATM
Event ID	2004
Event name	tAtmTcSubLayerDown
SNMP notification prefix and OID	TIMETRA-ATM-MIB.tAtmNotifications.1
Default severity	minor
Message format string	ATM Interface $subject$ entered LCD failure state
Cause	The tAtmTcSubLayerUp notification is generated when the ATM interface has left the no error Loss of Cell Delineation (LCD) state and entered the default LCD state.
Effect	N/A
Recovery	Investigate why the ATM TC Sublayer is currently in the LCD state.

October 25, 2023