SNMP

authenticationFailure

Table 1. authenticationFailure properties

Property name

Value

Application name

SNMP

Event ID

2003

Event name

authenticationFailure

SNMP notification prefix and OID

SNMPv2-MIB.snmpTraps.5

Default severity

minor

Message format string

Request PDU failed authentication - community = $subject$, from IP/UDP $sourceUDP$

Cause

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

Effect

The offending PDU is ignored. The requester will time out waiting for a response.

Recovery

If the PDU was from a legitimate requester, then 1) configure the requester to use correct authentication, privacy, MP method, etc. 2) configure the agent to have corresponding access If the PDU was not from a legitimate requester, then use the printed IP address to find the source of the PDU and deal with it appropriately.

coldStart

Table 2. coldStart properties

Property name

Value

Application name

SNMP

Event ID

2001

Event name

coldStart

SNMP notification prefix and OID

SNMPv2-MIB.snmpTraps.1

Default severity

major

Message format string

SNMP agent cold start

Cause

The SNMP agent was started. The coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Effect

The system will respond to SNMP requests. The system will send SNMP notifications. Applications will notice counter discontinuities. System configuration may have been altered.

Recovery

To recover from counter discontinuities, re-poll relevent counters to establish a new baseline. Re-poll relevent objects to discover present configuration.

fallingAlarm

Table 3. fallingAlarm properties

Property name

Value

Application name

SNMP

Event ID

2102

Event name

fallingAlarm

SNMP notification prefix and OID

RMON-MIB.rmonEventsV2.2

Default severity

major

Message format string

RMON alarm: $alarmDescription$

Cause

An RMON alarm entry crossed its falling threshold and generated an event that is configured for sending SNMP traps.

Effect

N/A

Recovery

N/A

linkDown

Table 4. linkDown properties

Property name

Value

Application name

SNMP

Event ID

2004

Event name

linkDown

SNMP notification prefix and OID

SNMPv2-MIB.snmpTraps.3

Default severity

warning

Message format string

Interface $subject$ is not operational

Cause

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

Effect

The indicated interface is taken down.

Recovery

If the ifAdminStatus is 'down' then the interface state is deliberate and there is no recovery. If the ifAdminStatus is 'up' then try to determine that cause of the interface going down: cable cut, distal end went down, etc.

linkUp

Table 5. linkUp properties

Property name

Value

Application name

SNMP

Event ID

2005

Event name

linkUp

SNMP notification prefix and OID

SNMPv2-MIB.snmpTraps.4

Default severity

warning

Message format string

Interface $subject$ is operational

Cause

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

Effect

The indicated interface is brought up.

Recovery

There is no recovery.

risingAlarm

Table 6. risingAlarm properties

Property name

Value

Application name

SNMP

Event ID

2101

Event name

risingAlarm

SNMP notification prefix and OID

RMON-MIB.rmonEventsV2.1

Default severity

major

Message format string

RMON alarm: $alarmDescription$

Cause

An RMON alarm entry crossed its rising threshold and generated an event that is configured for sending SNMP traps.

Effect

N/A

Recovery

N/A

snmpdError

Table 7. snmpdError properties

Property name

Value

Application name

SNMP

Event ID

2201

Event name

snmpdError

SNMP notification prefix and OID

TIMETRA-SYSTEM-MIB.tmnxSysNotifications.21

Default severity

major

Message format string

SNMP Error: $tmnxSnmpdErrorMsg$

Cause

The Snmp daemon detected an error.

Effect

N/A

Recovery

N/A

warmStart

Table 8. warmStart properties

Property name

Value

Application name

SNMP

Event ID

2002

Event name

warmStart

SNMP notification prefix and OID

SNMPv2-MIB.snmpTraps.2

Default severity

major

Message format string

SNMP agent warm start

Cause

The SNMP agent was re-started. A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.

Effect

The system will respond to SNMP requests. The system will send SNMP notifications. Applications will notice counter discontinuities. System configuration has not been altered.

Recovery

To recover from counter discontinuities, re-poll relevent counters to establish a new baseline. There is no need to re-poll relevent objects to discover present configuration.