PCAP
tmnxPcapBufferFull
Property name | Value |
---|---|
Application name | PCAP |
Event ID | 2002 |
Event name | tmnxPcapBufferFull |
SNMP notification prefix and OID | TIMETRA-PCAP-MIB.tmnxPcapNofitications.2 |
Default severity | minor |
Message format string | Session $tmnxPcapSessionName$'s allocated buffer is full, with size $tmnxPcapSessionBufferSize$. Total number of packets dropped by this session is $tmnxPcapSessionDroppedPackets$ pacekts. |
Cause | A tmnxPcapBufferFull notification is generated when the PCAP session allocated buffer is full, indicating a higher traffic rate. |
Effect | May result in dropping packets, if not recoverable. |
Recovery | The software will eventually recover when all the buffer contents are uploaded to the capture file. No action required. |
tmnxPcapBufferReadWriteFailure
Property name | Value |
---|---|
Application name | PCAP |
Event ID | 2003 |
Event name | tmnxPcapBufferReadWriteFailure |
SNMP notification prefix and OID | TIMETRA-PCAP-MIB.tmnxPcapNofitications.3 |
Default severity | major |
Message format string | Session $tmnxPcapSessionName$ has encountered a buffer read/write failure. Total read failures: $tmnxPcapSessionBufReadFailures$, total write failures: $tmnxPcapSessionBufWriteFailures$. |
Cause | A tmnxPcapBufferReadWriteFailure notification is generated when a read or write operation to the PCAP session buffer fails. |
Effect | Will result in dropping packets. |
Recovery | The software will potentially recover. No action may be required. However, if the problem persists stop the packet capture, delete and re-configure a new PCAP session. |
tmnxPcapFileError
Property name | Value |
---|---|
Application name | PCAP |
Event ID | 2001 |
Event name | tmnxPcapFileError |
SNMP notification prefix and OID | TIMETRA-PCAP-MIB.tmnxPcapNofitications.1 |
Default severity | minor |
Message format string | Session $tmnxPcapSessionName$ has encountered a capture file operation related error. Session is in $tmnxPcapSessionState$ state. |
Cause |
A tmnxPcapFileError notification is generated when a PCAP session encounters a capture file operation related error. |
Effect | The packet capture may not be uploaded to the PCAP file anymore, or the capture may be inaccurate. |
Recovery | Check the file-url, and user-permissions specified. Stop the packet capture, remove and re-configure a new file-url, and start the capture again. |
tmnxPcapSoftwareFailure
Property name | Value |
---|---|
Application name | PCAP |
Event ID | 2004 |
Event name | tmnxPcapSoftwareFailure |
SNMP notification prefix and OID | TIMETRA-PCAP-MIB.tmnxPcapNofitications.4 |
Default severity | major |
Message format string | Session $tmnxPcapSessionName$ has encountered a software failure. Session is in $tmnxPcapSessionState$ state. |
Cause |
A tmnxPcapSoftwareFailure notification is generated when a software failure occurs, affecting the ability of the PCAP session to perform its task. |
Effect | Will result in dropping packets. |
Recovery | Stop the packet capture, delete and re-configure a new PCAP session. |