b Commands

bandwidth-policy

Syntax

bandwidth-policy policy-name [detail]

Context

[Tree] (show>mcast-management bandwidth-policy)

Full Context

show mcast-management bandwidth-policy

Description

This command displays multicast path management bandwidth policy information.

Parameters

policy-name: Specifies the bandwidth policy name, up to 32 characters.

detail: Displays detailed information.

Platforms

7450 ESS, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-7/12/12e, 7750 SR-s, 7950 XRS, VSR

Output

The following output displays an example of multicast management bandwidth policy information.

Sample Output

*A:PE-1# show mcast-management bandwidth-policy "default" detail
===============================================================================
Bandwidth Policy Details
===============================================================================
-------------------------------------------------------------------------------
Policy             : default
-------------------------------------------------------------------------------
Admin BW Thd       : 10 kbps            Falling Percent RST: 50
Mcast Pool Total   : 10                 Mcast Pool Resv Cbs: 50
Slope Policy       : default
Primary
Cbs                : 5.00               Mbs                : 7.00
Low Drop Tail      : 10
Secondary
Cbs                : 30.00              Mbs                : 40.00
Low Drop Tail      : 10                 Paths(Single/Dual) : 1/1
===============================================================================
Bandwidth Policies : 1
===============================================================================
*A:PE-1#

base

Syntax

base [msap]

Context

[Tree] (show>service>id base)

Full Context

show service id base

Description

This command displays basic information about the service ID, including service type, description, SAPs, and SDPs.

Parameters

msap: Displays MSAPs.

Platforms

All

Output

The following output is an example of base service ID information, and Show Service-ID Base Output Fields describes the output fields.

Sample Output

*A:Dut-C>config>service>vpls#  show service  id 1 base 
===============================================================================
Service Basic Information
===============================================================================
Service Id        : 1                   Vpn Id            : 1
Service Type      : VPLS                
MACSec enabled    : no                  
Name              : 1
Description       : Vpls 1 - BgpVpls
Customer Id       : 1                   Creation Origin   : manual
Last Status Change: 01/19/2022 21:36:58 
Last Mgmt Change  : 01/19/2022 21:45:55 
Etree Mode        : Disabled            
Admin State       : Up                  Oper State        : Up
MTU               : 1400                
SAP Count         : 1                   SDP Bind Count    : 2
Snd Flush on Fail : Disabled            Host Conn Verify  : Disabled
SHCV pol IPv4     : None
Propagate MacFlush: Disabled            Per Svc Hashing   : Disabled
Allow IP Intf Bind: Disabled            
Fwd-IPv4-Mcast-To*: Disabled            Fwd-IPv6-Mcast-To*: Disabled
Mcast IPv6 scope  : mac-based           
Def. Gateway IP   : None                
Def. Gateway MAC  : None                
Temp Flood Time   : Disabled            Temp Flood        : Inactive
Temp Flood Chg Cnt: 0                   
SPI load-balance  : Disabled            
TEID load-balance : Disabled            
Lbl Eth/IP L4 TEID: Disabled            
Src Tep IP        : N/A                 
Vxlan ECMP        : Disabled            
MPLS ECMP         : Disabled            
Ignore MTU Mismat*: Enabled             
VSD Domain        : <none>
 
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier                               Type         AdmMTU  OprMTU  Adm  Opr
-------------------------------------------------------------------------------
sap:1/1/4:1                              q-tag        1518    1518    Up   Up
sdp:32766:4294967292 SB(10.20.1.6)       BgpVpls      0       1492    Up   Up
sdp:32767:4294967295 SB(10.20.1.1)       BgpVpls      0       1492    Up   Up
===============================================================================
* indicates that the corresponding row element may have been truncated.

# show service id 2000 base 
 
===============================================================================
Service Basic Information
===============================================================================
<snip>
 
Router Oper State : Up                  
Route Dist.       : auto-rd             VPRN Type         : regular
Oper Route Dist   : 192.0.2.3:64000
Oper RD Type      : auto                
AS Number         : None                Router Id         : 192.0.2.3
ECMP              : Enabled             ECMP Max Routes   : 1
Max IPv4 Routes   : No Limit            
Local Rt Domain-id: 65000:1

Table 1. Show Service-ID Base Output Fields
Label	Description
Service Id	Displays the service identifier
Vpn Id	Displays the VPN ID assigned to the service
Service Type	Displays the type of service: Epipe, Apipe, Fpipe, Ipipe, VPLS, IES, VPRN
MACSec enabled	Indicates whether MACsec is enabled
Name	Displays the service name
Description	Displays the generic information about the service
Customer Id	Displays the customer identifier
Creation Origin	Displays how the service was created
Last Status Change	Displays the date and time of the most recent status change to this customer
Last Mgmt Change	Displays the date and time of the most recent management-initiated change to this customer
Etree Mode	Indicates whether Etree mode is enabled
Admin State	Displays the state of the service
Oper State	Displays the operating state of the service
MTU	Displays the largest frame size (in octets) that the service can handle
SAP Count	Displays the number of SAPs defined on the service
SDP Bind Count	Displays the number of SDPs bound to the service
Snd Flush on Fail	Indicates whether sending MAC flush messages is enabled
Host Conn Verify	Indicates whether the host is connected
Propogate MacFlush	Indicates whether MAC flush messages are propagated to remote Target LDP (TLDP) peers
Per Svc Hashing	Indicates whether per-service hashing is enabled for this service
Allow IP Intf Bind	Indicates whether allow IP interface binding is enabled for R-VPLS services
Fwd-IPv4-Mcast-To*	Indicates whether IPv4 multicast traffic to the VPRN interface attached to the R-VPLS is enabled
Fwd-IPv6-Mcast-To*	Indicates whether IPv6 multicast traffic to the VPRN interface attached to the R-VPLS is enabled
Mcast IPv6 scope	Displays the IPv6 multicast scope
Def. Gateway IP	Displays the default gateway
Def. Gateway MAC	Displays the default gateway MAC address
Temp Flood Time	Displays the temporary flood time
Temp Flood	Displays the temporary flood time state
Temp Flood Chg Cnt	Displays the temporary flood change count
SPI load-balance	Indicates whether SPI load-balance is enabled
TEID load-balance	Indicates whether TEID load balancing is enabled
Lbl Eth/IP L4 TEID	Indicates whether load balancing based on MPLS labels and inner Ethernet, IP addresses, L4 ports, and TEID is enabled
Src Tep IP	Displays the Termination Endpoint address
Vxlan ECMP	Indicates whether VXLAN ECMP is enabled
MPLS ECMP	Indicates whether MPLS ECMP is enabled
Ignore MTU Mismatch	Displays the configuration state of the ignore-l2-mtu-mismatch command for the service
VSD Domain	Displays the Nuage Virtual Service Directory (VSD) domain
SAP Type	Displays the type of SAPs allowed in the service and describes the processing applied by the node packets received on these SAPs
Vxlan Src Tep Ip	Displays the VXLAN source tunnel endpoint (TEP) ID
Force QTag Fwd	Indicates whether force Q-tag forwarding is enabled
Oper Group	Displays the operational group for this service
Identifier	Displays the service access (SAP) and destination (SDP) points
Type	Displays the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on the SDP
AdmMTU	Displays the largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented
OprMTU	Displays the operational MTU of the SAP or SDP bind
Admin State (Adm)	Displays the administrative state
Oper State (Opr)	Displays the operation state
PBB Tunnel Point	Displays the endpoint in the B-VPLS environment where the Epipe terminates
Admin MTU	Displays the B-VPLS admin MTU
Backbone-Flooding	Indicates whether traffic is flooded in the B-VPLS for the destination instead of unicast. If the backbone destination MAC is in the B-VPLS FDB, it is unicast.
ISID	Displays the 24 bit field carrying the service instance identifier associated with the frame. It is used at the destination PE as a demultiplex or field.
Router Oper State	Displays the operational state of the router
Route Dist.	Displays the route distinguisher (RD) type
VPRN Type	Displays the VPRN type
Oper Route Dist	Displays the IP address of the operational RD
Oper RD Type	Displays the operational RD type
AS Number	Displays the AS number
Router Id	Displays the router ID
ECMP	Displays the status of ECMP
ECMP Max Routes	Displays the maximum ECMP routes
Max IPv4 Routes	Displays the maximum IPv4 routes
Local Rt Domain-id	Displays the local route domain ID

base

Syntax

base

Context

[Tree] (show>service>id>mld-snooping base)

Full Context

show service id mld-snooping base

Description

This command displays basic MLD snooping information.

Platforms

All

base

Syntax

base

Context

[Tree] (show>service>id>spb base)

Full Context

show service id spb base

Description

This command displays SPB base information.

Platforms

All

Output

The following output is an example of service SPB base information.

Sample Output

*A:Dut-A# show service id 100001 spb base
===============================================================================
Service SPB Information
===============================================================================
Admin State        : Up                 Oper State         : Up
ISIS Instance      : 1024               FID                : 1
Bridge Priority    : 8                  Fwd Tree Top Ucast : spf
Fwd Tree Top Mcast : st
Bridge Id          : 80:00.00:10:00:01:00:01
Mcast Desig Bridge : 80:00.00:10:00:01:00:01

===============================================================================
ISIS Interfaces
===============================================================================
Interface                        Level CircID  Oper State   L1/L2 Metric
-------------------------------------------------------------------------------
sap:1/2/2:1.1                    L1    65536   Up           10/-
sap:1/2/3:1.1                    L1    65537   Up           10/-
-------------------------------------------------------------------------------
Interfaces : 2
===============================================================================
FID ranges using ECT Algorithm
-------------------------------------------------------------------------------
1-99      low-path-id
100-100   high-path-id
101-4095  low-path-id
===============================================================================

base-routing-instance

Syntax

base-routing-instance [locatorlocator-name] [end-x] [end-dt4] [end-dt6] [end-dt46] [end]

base-routing-instance all

base-routing-instance micro [micro-segment-locator locator-name] [ua] [udt4] [udt6] [udt46]

Context

[Tree] (show>router>srv6 base-routing-instance)

Full Context

show router segment-routing-v6 base-routing-instance

Description

This command displays SRv6 Base routing instances.

Parameters

locator-name: Specifies the locator or micro-segment locator name, up to 64 characters.

end-x: Displays the End.X SID function associated with a P2P interface.

end-dt4: Displays the End.DT4 function associated with the Base routing instance.

end-dt6: Displays the End.DT6 function associated with the Base routing instance.

end-dt46: Displays the End.DT46 function associated with the Base routing instance.

end: Displays the End SID function of a locator.

ua: Displays the uA SID function associated with a P2P interface.

udt4: Displays the uDT4 function associated with the Base routing instance.

udt6: Displays the uDT6 function associated with the Base routing instance.

udt46: Displays the uDT46 function associated with the Base routing instance.

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

bcg

Syntax

bcg Burst-Control-Group-name member-queues [ at-risk-only] [exp-util-bw megabits-persecond] [port port-id] [sap sap-id] [subscriber sub-ident] [access-queue-grp queue-group-name] [ service-id service-id]

bcg burst-control-group-name [member-queues] [exp-util-bw mega-bits-per-second]

bcg card-slot-number [ingress | egress]

Context

[Tree] (show>qos bcg)

Full Context

show qos bcg

Description

The show qos bcg command outputs the current and historical visitation time associated with the specified BCG name.

A Burst Control Group (BCG) represents a list of queues that share the same non-scheduling PIR and CIR bucket target update interval. When a queue’s scheduled rate bursts above its PIR bucket depth, the queue is removed from its scheduling context. The system uses a BCG in order to visit the queues PIR bucket to periodically drain an appropriate amount from the bucket. When the bucket has been drained below the PIR bucket threshold, the queue is allowed back onto its scheduling context. The amount decremented from the bucket is a function of the amount of time that has elapsed since the last bucket update and the queue’s shaping rate (PIR). If the queue’s shaping rate is configured as 1 Mb/s and 1 ms has elapsed since the last bucket update, the system decrements the PIR bucket by 125 bytes. One caveat is that the bucket cannot be decremented past a depth of 0. This fact drives how the system chooses which BCG is used to manage the queue bucket update interval.

If a queue’s shaping rate is 1 Mb/s and the threshold (burst limit) is set to 10 kbytes, the maximum amount of time that can expire before the queue is updated without resulting in a negative bucket depth is 81.92 ms. This can be calculated by taking the number of bits represented by the bucket depth (10 kbytes = 10 * 1,024 * 8 = 81,920 bits) and dividing it by the rate (81,920 bits / 1,000,000 bits per second = 81.92 ms). The queue is not removed from the scheduler until the PIR bucket depth has equaled or exceeded the configured burst threshold, so the bucket is at least 10 kbytes deep. If the system visits the queue PIR bucket within 81.92 ms, the resulting decrement operation leaves the bucket. If the system takes longer than 81.92 ms, the decrement result will be greater than 10 kbytes and part of the decrement result is lost. The net result is that, because of less than timely updates, the queue will not be returned to the scheduler context fast enough and some shaping bandwidth for the queue will be lost (underrun the shaping rate).

Each FP2- and FP3-based Q-chip maintains eight BCGs, each targeting a certain queue bucket visitation time. A 1 s, 40 ms, 20 ms, 10 ms, 5 ms, 1 ms, 500 µs, and 100 µs BCG is supported. An FP4-based Q-chip has an additional four BCGs with target visitation times of 50 μs, 10 μs, 5 μs, and 1 μs. By default, queues are placed in a BCG based on shaping rate and the queue’s burst limit (PIR threshold depth) is set based on the BCG visitation time and the queue’s specified shaping rate.

When explicit burst-limit threshold values are defined for a shaping queue, the system picks an appropriate BCG based on the queue’s configured shaping rate and the explicit threshold to find a BCG with the best target visitation time that results in worst-case decrement values that are less than the configured threshold. However, when a queue is placed on a 'faster’ BCG, more visitation resources are consumed and it is possible that the system will not meet a queue’s decrement constraints.

The show qos bcg command allows visibility into a BCG’s historic and current visitation time. The system samples the amount of time it takes each list to visit each of its associated queues once each second and stores the last 10 samples. It also keeps the longest visitation time seen since the last time the BCG statistics were cleared, the longest visitation time for the current queue-to-BCG lists associations, calculated longest visitation time based on maximum scheduling bandwidth, and the longest visitation time for an optionally defined scheduling rate.

With each sample, the system indirectly calculates the amount of scheduling bandwidth based on how many Q-chip resources were diverted from BCG visitation processing. This calculated scheduling bandwidth is used to evaluate the worst-case visitation times for each BCG. The calculated scheduling bandwidth value is stored with the longest-seen-visitation time and the longest-seen-visitation time with the current queue-to-BCG mappings. This is not applicable to an FP4-based Q-chip, so the exp-util-bw parameter is not applicable to an FP4-based Q-chip.

Parameters

Burst-Control-Group-name

Specifies which globally unique Burst Control Group to display. If the specified Burst Control Group does not exist, the show command will fail.

Values

<slot>/<fp>-< target-visitation-time>[-<direction>]

slot - 1 to 20

fp - 1 to 8

target-visitation-time -1 μs, 5 μs, 10 μs, 50 μs, 100 μs, 500 μs, 1ms, 5ms, 10ms, 20ms, 40ms, 1s

direction - i, e

member-queues: Includes a list of all queues attached to the specified burst-control-group-name. The 100% scheduling bandwidth used in the 'at-risk’ determination may be overridden with a specified scheduling bandwidth by using the exp-util-bw parameter. When the member-queues parameter is specified, the output includes a single-entry summary of the internal queues.

exp-util-bw mega-bits-per-second

Displays a calculated worst-case visitation rate for the specified BCG name based on the specified value of megabits-persecond which also modifies the member queue’s 'at-risk’ state output. This parameter is not applicable to FP4-based hardware which has dedicated internal resources for handling BCG visitations and is unaffected by scheduling bandwidth.

Values: 0 to 4294967

port port-id

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified port-id. If the specified port-id does not exist, the show command will fail.

Values: Up to 17 characters

sap sap-id

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified sap-id. If the specified sap-id does not exist, the show command will fail.

Values: Up to 64 characters

subscriber sub-ident

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified sub-ident. If the specified sub-ident does not exist, the show command will fail.

Values: Up to 32 characters

access-queue-grp queue-group-name

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues within the specified queue-group-name. If the specified queue-group-name is not found, the show command will fail.

Values: Up to 32 characters

service service-id

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified service-id. If the specified service-id does not exist, the show command will fail.

Values: 1 to 2147483647

card-slot-number

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for all queues associated with the specified card-slot-number. If the specified card-slot-number does not exist, the show command will fail.

Values: 1 to 40

[ingress | egress]: The ingress and egress keywords specify the direction to display and are mutually exclusive.

Platforms

All

bd

Syntax

bd [bridge-id]

Context

[Tree] (show>subscr-mgmt>vrgw>lanext bd)

Full Context

show subscriber-mgmt vrgw lanext bd

Description

This command displays information for the specified HLE bridge. If no bridge is specified, then all domains are listed.

Parameters

bridge-id

Specifies the BD ID.

Values: 1 to 4294967295

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of HLE bridge information.

Sample Output

show subscriber-mgmt vrgw lanext bd 100
===============================================================================
BRIDGE DOMAIN(S)
===============================================================================
BRIDGE-ID                    : 100
VNI                          : 1
ROUTE TARGET                 : TARGET:100:100
ROUTE DISTINGUISHER          : 100:100
WLANGW GRPID                 : 1
ISA MEMBERID                 : 1
WLANGW BD VLANTAG            : N/A
WLANGW BD SERVICE            : 500
WLANGW BD INTERFACE          : G1
WLANGW BD MAC TRANSLATION    : N/A
WLANGW BD MAC                : AA:BB:CC:00:00:01
WLANGW BD ASSIST.ADDR.RES    : DISABLED
WLANGW BD NETW MAXMAC        : 20
WLANGW BD NETW STATE         : ENABLED
WLANGW BD ACCS MAXMAC        : 20
-------------------------------------------------------------------------------
NO. OF BRIDGE DOMAINS: 1
===============================================================================

bd

Syntax

bd bridge-id

Context

[Tree] (tools>dump>wlan-gw>lanext bd)

[Tree] (tools>perform>wlan-gw>lanext bd)

Full Context

tools dump wlan-gw lanext bd

tools perform wlan-gw lanext bd

Description

Commands in this context enter the specified HLE BD to perform tools commands.

Parameters

bridge-id

Specifies the HLE BD ID.

Values: 1 to 4294967295

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

bfd

Syntax

bfd

Context

[Tree] (tools>dump>router bfd)

Full Context

tools dump router bfd

Description

Commands in this context dump LSP-BFD information for LDP and RSVP LSPs.

Platforms

All

bfd

Syntax

bfd

Context

[Tree] (show>router bfd)

Full Context

show router bfd

Description

Commands in this context display bidirectional forwarding detection (BFD) information.

Platforms

All

Output

The following output is an example of BFD information.

Sample Output

*A:Dut-D# show router 3 bfd session
===============================================================================
BFD Session
===============================================================================
InterfaceState                 Tx Intvl  Rx Intvl  Multipl
  Remote Address              Protocols             Tx Pkts   Rx Pkts   Type
-------------------------------------------------------------------------------
ies-3-10.1.3.3                Up (3)                10        10        3
   10.1.3.2                   ospf2                 N/A       N/A       cpm-np
ies-3-10.1.4.3                Up (3)                100       100       3
   10.1.4.2                   pim                   455       464       iom
-------------------------------------------------------------------------------
No. of BFD sessions: 2
===============================================================================
*A:Dut-D#
 
 
*A:Dut-C# show router bfd session src 10.120.1.4 dest 10.120.1.3
===============================================================================
BFD Session
===============================================================================
Remote Address : 10.120.1.3
Admin State    : Up                       Oper State       : Up (3)
Protocols      : static
Rx Interval    : 10                       Tx Interval      : 10
Multiplier     : 3                        Echo Interval    : 0
Up Time        : 1d 19:03:28              Up Transitions   : 2
Down Time      : None                     Down Transitions : 1
                                          Version Mismatch : 0
Forwarding Information
Local Discr    : 19269                    Local State      : Up (3)
Local Diag     : 0 (None)                 Local Mode       : Async
Local Min Tx   : 10                       Local Mult       : 3
Last Sent (ms) : 6                        Local Min Rx     : 10
Type           : cpm-np
Remote Discr   : 5101                     Remote State     : Up (3)
Remote Diag    : 0 (None)                 Remote Mode      : Async
Remote Min Tx  : 1000                     Remote Mult      : 3
Last Recv (ms) : 367                      Remote Min Rx    : 10
===============================================================================
*A:Dut-C#

bfd

Syntax

bfd

Context

[Tree] (clear>router bfd)

Full Context

clear router bfd

Description

Commands in this context clear bidirectional forwarding (BFD) sessions and statistics.

Platforms

All

bfd

Syntax

bfd

Context

[Tree] (show>lag bfd)

Full Context

show lag bfd

Description

This command displays per-member BFD information.

Platforms

All

bfd-template

Syntax

bfd-template template-name

bfd-template

Context

[Tree] (show>router>bfd bfd-template)

Full Context

show router bfd bfd-template

Description

This command displays BFD template information.

Parameters

template-name: Displays the BFD template name, up to 32 characters.

Platforms

All

Output

The following output is an example of BFD template information.

Sample Output

*A:mlstp-dutA# show router bfd bfd-template "privatebed-bfd-template"
 
===============================================================================
BFD Template privatebed-bfd-template
===============================================================================
Template Name           : privatebed-* Template Type             : cpmNp
Transmit Timer          : 10 msec      Receive Timer             : 10 msec
CV Transmit Interval    : 1000 msec
Template Multiplier     : 3            Echo Receive Interval     : 100 msec
 
Mpls-tp Association
privatebed-oam-template
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:mlstp-dutA# show router bfd session
 
===============================================================================
BFD Session
===============================================================================
Interface/Lsp Name            State                 Tx Intvl  Rx Intvl  Multipl
  Remote Address/Info         Protocols             Tx Pkts   Rx Pkts   Type
-------------------------------------------------------------------------------
wp::lsp-32                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-33                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-34                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-35                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-36                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-37                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-38                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-39                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-40                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-41                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-32                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-33                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-34                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-35                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-36                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-37                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-38                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-39                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-40                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-41                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
-------------------------------------------------------------------------------
No. of BFD sessions: 20
-------------------------------------------------------------------------------
wp = Working path   pp = Protecting path
===============================================================================

bfd-templates-in-use

Syntax

bfd-templates-in-use

Context

[Tree] (tools>dump>router>ldp>lsp-bfd bfd-templates-in-use)

Full Context

tools dump router ldp lsp-bfd bfd-templates-in-use

Description

This command indicates the named BFD templates that are configured for use by LSP BFD for LDP.

Platforms

All

bgp

Syntax

bgp [bgp-instance]

Context

[Tree] (show>service>id bgp)

Full Context

show service id bgp

Description

This command displays BGP-related information for the service.

Parameters

bgp-instance

Specifies the ID value for the BGP instance.

Values: 1, 2

Platforms

All

Output

The following is an example of BGP-related output, and Output Fields: Service BGP describes the output fields.

Sample Output

*A:PE-2>config>service>vpls$ /show service id 1985 bgp 
===============================================================================
BGP Information
===============================================================================
Vsi-Import           : None
Vsi-Export           : vsi-exp1
Route Dist           : None
Oper Route Dist      : 0:0
Oper RD Type         : none                 
Rte-Target Import    : 64500:1985           Rte-Target Export: None
Oper RT Imp Origin   : configured           Oper RT Import   : 64500:1985
Oper RT Exp Origin   : vsi                  Oper RT Export   : Policy Based
PW-Template Id       : None                 
ADV Service MTU      : 1450 
PW-Template Id       : None

-------------------------------------------------------------------------------
===============================================================================

Table 2. Output Fields: Service BGP
Label	Description
Vsi-Import	Displays the names of the VSI import policies used for the service
Vsi-Export	Displays the names of the VSI export policies used for the service
Route Dist	Displays the configured route distinguisher (RD) component
Oper Route Dist	Displays the IP address of the operational RD
Oper RD Type	Displays the operational RD type
Rte-Target Import	Displays the IP address of the configured route target (RT) import ext-community
Rte-Target Export	Displays the IP address of the configured RT export ext-community
Oper RT Imp Origin	Displays the origin of the operational RT import information
Oper RT Import	Displays the operational RT import information
Oper Rt Exp Origin	Displays the origin of the operational RT export information
Oper Rt Export	Displays the operational RT export information
ADV Service MTU	Displays the MTU value that is configured using the adv-service-mtu command
PW-Template Id	Displays the configured pseudowire (PW) template ID

bgp

Syntax

bgp

Context

[Tree] (clear>router bgp)

Full Context

clear router bgp

Description

This command clears or resets the route damping information for received routes.

Platforms

All

bgp

Syntax

bgp

Context

[Tree] (show>router bgp)

Full Context

show router bgp

Description

Commands in this context display BGP related information.

Platforms

All

bgp

Syntax

bgp [color color] [ end-point {ipv4-address | ipv6-address}] [preference preference-id] [distinguisher distinguisher-id]

bgp summary

Context

[Tree] (show>router>seg-rt>sr-policies bgp)

Full Context

show router segment-routing sr-policies bgp

Description

This command displays the traffic statistics of all or a filtered set of the BGP policies, or displays summary parameters.

Parameters

color

Filters on the color.

Values: 0 to 4294967295

ipv4-address | ipv6-address

Filters on the end-point IPv4 or IPv6 address.

Values

ipv4-address — a.b.c.d

ipv6-address — x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d:d:d:d

x — [0 to FFFF]H

d — [0 to 255]D

preference-id

Filters on the preference ID.

Values: 0 to 4294967295

distinguisher-id

Filters on the distinguisher ID.

Values: 0 to 4294967295

summary: Displays the summary information for the BGP policies.

Platforms

All

Output

The following outputs are examples of traffic statistics for the BGP policies.

Sample Output Information for all BGP Policies

 *A:Dut-C# show router segment-routing sr-policies bgp    
===============================================================================
SR-Policies Path
===============================================================================
-------------------------------------------------------------------------------
Type            : srv6                  
Active          : No                    Owner           : bgp
Color           : 50                    
Head            : 0.0.0.0               Endpoint Addr   : 3ffe::a14:102
RD              : 5                     Preference      : 14
SRv6 BSID 1     : 1111:1:1:1:0:b::
TunnelId        : 917511                Age             : 0
Origin ASN      : 2                     Origin          : 3ffe::a14:102
NumReEval       : 7                     ReEvalReason    : tunnel-down
NumActPathChange: 0                     Last Change     : 06/13/2022 17:45:57
Maintenance Policy: N/A
 
Path Segment Lists:
Segment-List    : 1                     Weight          : 1
S-BFD State     : Down                  S-BFD Transitio*: 0
Num Segments    : 2                     Last Change     : 06/10/2022 17:07:01
  Seg 1 SID   : 3333:3:3:3:0:a::                         State : resolved-up
  Seg 2 SID   : 2222:2:2:2:0:a::                         State : N/A
 
===============================================================================
* indicates that the corresponding row element may have been truncated.

Sample Output Information for a Subset of BGP Policies

*A:Dut-C# show router segment-routing sr-policies bgp end-point 3ffe::a14:102    
===============================================================================
SR-Policies Path
===============================================================================
-------------------------------------------------------------------------------
Type            : srv6                  
Active          : No                    Owner           : bgp
Color           : 50                    
Head            : 0.0.0.0               Endpoint Addr   : 3ffe::a14:102
RD              : 5                     Preference      : 14
SRv6 BSID 1     : 1111:1:1:1:0:b::
TunnelId        : 917511                Age             : 0
Origin ASN      : 2                     Origin          : 3ffe::a14:102
NumReEval       : 2                     ReEvalReason    : tunnel-down
NumActPathChange: 0                     Last Change     : 06/13/2022 17:45:57
Maintenance Policy: N/A
 
Path Segment Lists:
Segment-List    : 1                     Weight          : 1
S-BFD State     : Down                  S-BFD Transitio*: 0
Num Segments    : 2                     Last Change     : 06/10/2022 17:07:01
  Seg 1 SID   : 3333:3:3:3:0:a::                         State : resolved-up
  Seg 2 SID   : 2222:2:2:2:0:a::                         State : N/A
 
===============================================================================
* indicates that the corresponding row element may have been truncated.

bgp

Syntax

bgp

Context

[Tree] (monitor>router bgp)

Full Context

monitor router bgp

Description

This command monitors commands for the BGP instance.

Platforms

All

bgp-auto-rd

Syntax

bgp-auto-rd

Context

[Tree] (show>service>system bgp-auto-rd)

Full Context

show service system bgp-auto-rd

Description

This command displays BGP auto route distinguisher (RD) information.

Platforms

All

Output

The following shows an example of BGP auto route distinguisher (RD) information

Sample Output

*A:Dut#show service system bgp-auto-rd 
=======================================================================
Service BGP Auto Route Distinguisher Information
=======================================================================
IP address         : 192.0.2.69                   
Comm Val Start     : 1200                         End           : 1300
In Use             : 1                            
=======================================================================

bgp-evpn

Syntax

bgp-evpn

Context

[Tree] (show>service>id bgp-evpn)

Full Context

show service id bgp-evpn

Description

This command displays the bgp-evpn configured parameters for a specified service, including the administrative status of VXLAN, the configuration for mac-advertisement and unknown-mac-route, as well as the mac-duplication parameters. The command displays the duplicate MAC addresses that mac-duplication has detected.

This command also displays whether the ip-route-advertisement command (and the incl-host parameter) is enabled. If the service is BGP-EVPN MPLS, the command also displays the parameters corresponding to EVPN-MPLS.

Platforms

All

Output

The following is an example of BGP EVPN information.

Sample Output

# show service id "BD-6023" bgp-evpn 
===============================================================================
BGP EVPN Table
===============================================================================
MAC Advertisement  : Enabled            Unknown MAC Route  : Disabled
CFM MAC Advertise  : Disabled           
Creation Origin    : manual             
MAC Dup Detn Moves : 5                  MAC Dup Detn Window: 3
MAC Dup Detn Retry : 9                  Number of Dup MACs : 0
MAC Dup Detn BH    : Disabled           
IP Route Advert    : Disabled           
Domain-Id          : None               
Sel Mcast Advert   : Disabled           
 
EVI                : 623                
Ing Rep Inc McastAd: Enabled            
Accept IVPLS Flush : Disabled           
-------------------------------------------------------------------------------
Detected Duplicate MAC Addresses             Time Detected
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN MPLS Information
===============================================================================
Admin Status       : Enabled            Bgp Instance       : 1
Force Vlan Fwding  : Disabled           
Route NextHop Type : system-ipv4        
Control Word       : Disabled           
Max Ecmp Routes    : 1                  
Entropy Label      : Disabled           
Default Route Tag  : none               
Split Horizon Group: (Not Specified)
Ingress Rep BUM Lbl: Enabled            
Ingress Ucast Lbl  : 524259             Ingress Mcast Lbl  : 524258
RestProtSrcMacAct  : none               
Evpn Mpls Encap    : Enabled            Evpn MplsoUdp      : Disabled
Oper Group         :                    
MH Mode            : network            
Evi 3-byte Auto-RT : Disabled           
Dyn Egr Lbl Limit  : Disabled           
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN MPLS Auto Bind Tunnel Information
===============================================================================
Allow-Flex-Algo-Fallback  : false              
Resolution                : any                Strict Tnl Tag   : false
Max Ecmp Routes           : 1                  
Bgp Instance              : 1                  
Filter Tunnel Types       : (Not Specified)
-------------------------------------------------------------------------------
===============================================================================

# bgp-evpn vxlan service

# show service id 1 bgp-evpn 
===============================================================================
BGP EVPN Table
===============================================================================
MAC Advertisement  : Enabled            Unknown MAC Route  : Disabled
VXLAN Admin Status : Enabled            Creation Origin    : manual
MAC Dup Detn Moves : 5                  MAC Dup Detn Window: 3
MAC Dup Detn Retry : 9                  Number of Dup MACs : 1
IP Route Advertise*: Enabled            Include hosts      : Disabled 
-------------------------------------------------------------------------------
Detected Duplicate MAC Addresses             Time Detected
-------------------------------------------------------------------------------
00:12:12:12:12:00                            01/17/2014 16:01:02
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN MPLS Information
===============================================================================
Admin Status       : Disabled           
Force Vlan Fwding  : Disabled           Control Word       : Disabled
Split Horizon Group: (Not Specified)
Ingress Rep BUM Lbl: Disabled           Max Ecmp Routes    : 0
Ingress Ucast Lbl  : N/A                Ingress Mcast Lbl  : N/A
Entropy Label      : Disabled           
===============================================================================
===============================================================================
BGP EVPN MPLS Auto Bind Tunnel Information
===============================================================================
Resolution         : disabled           
Filter Tunnel Types: (Not Specified)
===============================================================================

# show service id 30 bgp-evpn 
===============================================================================
BGP EVPN Table
===============================================================================
MAC Advertisement  : Enabled            Unknown MAC Route  : Disabled
CFM MAC Advertise  : Disabled           
Creation Origin    : manual             
MAC Dup Detn Moves : 5                  MAC Dup Detn Window: 3
MAC Dup Detn Retry : 9                  Number of Dup MACs : 0
MAC Dup Detn BH    : Disabled           
IP Route Advert    : Disabled           
 
EVI                : 30                 
Ing Rep Inc McastAd: Enabled            
Accept IVPLS Flush : Disabled           
-------------------------------------------------------------------------------
Detected Duplicate MAC Addresses             Time Detected
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN VXLAN Information
===============================================================================
Admin Status       : Enabled            Bgp Instance       : 1
Vxlan Instance     : 1                  
Max Ecmp Routes    : 2                  
Default Route Tag  : none               
Send EVPN Encap    : Enabled            
Imet-Ir routes     : Enabled            
MH Mode            : network             
Auto Disc Route Adv: Enabled             
===============================================================================

bgp-evpn

Syntax

bgp-evpn [ethernet-segment]

bgp-evpn ethernet-segment name name [all] [ evi evi] [isid isid]

Context

[Tree] (show>service>system bgp-evpn)

Full Context

show service system bgp-evpn

Description

This command displays all the information related to the base EVPN instance, including the base RD used for Ethernet Segment (ES) routes, the ESs or individual ES information.

Parameters

ethernet-segment: Displays information for ES.

name: Specifies the name of an ES, up to 32 characters.

all: Displays all available information for the specified ES.

evi

Displays information for the specified EVI.

Values: 1 to 65535

isid

Displays information for the specified ISID.

Values: 1 to 16777215

Platforms

All

Output

The following output is an example of service system BGP EVPN information, and BGP EVPN Output Fields describes the output fields.

Table 3. BGP EVPN Output Fields
Label	Description
Eth Seg Route Dist	Specifies the ES Route Distinguisher.
Eth Seg Oper Route Dist	Specifies the operational ES Route Distinguisher.
Eth Seg Oper Route Dist Type	Specifies the operational ES Route Distinguisher type.
Ad Per ES Route Target	Specifies the AD per-ES route target.
Leaf Label	Specifies the leaf label.
Alloc Leaf Label	Specifies the allocated leaf label.
Leaf Label Value	Specifies the leaf label value.
EVI RT set Route Dist.	Specifies the EVI RT set range.
Extended Evi Range	Specifies the EVI extended range status.
Mcast Leave Sync Prop	Specifies the multicast leave synchronization propagation time.
Attribute Uniform Prop	Specifies the attribute uniform propagation configuration.
BGP Path Selection	Specifies the configuration of the BGP Path Selection.

Sample Output

*A:PE-3# show service system bgp-evpn                               
===============================================================================
System BGP EVPN Information
===============================================================================
Eth Seg Route Dist.               : <none>
Eth Seg Oper Route Dist.          : 192.0.2.3:0
Eth Seg Oper Route Dist Type      : default
Ad Per ES Route Target            : evi-rt
EVI RT set Route Dist.            : 1.2.3.6:1 - 1.2.3.6:512
Extended Evi Range                : Disabled
Leaf Label                        : 524259
Alloc Leaf Label                  : Enabled
Leaf Label Value                  : dynamic
Mcast Leave Sync Prop             : 5
Attribute Uniform Prop            : Enabled
BGP Path Selection                : Enabled
===============================================================================

*A:PE1# show service system bgp-evpn ethernet-segment 
===============================================================================
Service Ethernet Segment
===============================================================================
Name                             ESI                           Admin     Oper
-------------------------------------------------------------------------------
ESI-71                           01:00:00:00:00:71:00:00:00:01 Enabled   Up
-------------------------------------------------------------------------------
Entries found: 1
===============================================================================

*A:PE1# show service system bgp-evpn ethernet-segment name "ESI-71" all 
===============================================================================
Service Ethernet Segment
===============================================================================
Name                    : ESI-71
Admin State             : Enabled            Oper State         : Up
ESI                     : 01:00:00:00:00:71:00:00:00:01
Multi-homing            : allActive          Oper Multi-homing  : allActive
Source BMAC LSB         : 71-71              
ES BMac Tbl Size        : 8                  ES BMac Entries    : 1
Lag Id                  : 1                  
ES Activation Timer     : 0 secs             
Exp/Imp Route-Target    : target:00:00:00:00:71:00

Svc Carving             : auto               
ES SHG Label            : 262142             
===============================================================================

===============================================================================
EVI Information 
===============================================================================
EVI                 SvcId               Actv Timer Rem      DF
-------------------------------------------------------------------------------
1                   1                   0                   no
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
-------------------------------------------------------------------------------
DF Candidate list
-------------------------------------------------------------------------------
EVI                                     DF Address
-------------------------------------------------------------------------------
1                                       192.0.2.69
1                                       192.0.2.72
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
                                      
===============================================================================
ISID Information 
===============================================================================
ISID                SvcId               Actv Timer Rem      DF
-------------------------------------------------------------------------------
20001               20001               0                   no
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
-------------------------------------------------------------------------------
DF Candidate list
-------------------------------------------------------------------------------
ISID                                    DF Address
-------------------------------------------------------------------------------
20001                                   192.0.2.69
20001                                   192.0.2.72
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
===============================================================================
BMAC Information 
===============================================================================
SvcId                                   BMacAddress
-------------------------------------------------------------------------------
20000                                   00:00:00:00:71:71
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================

bgp-evpn

Syntax

bgp-evpn

Context

[Tree] (tools>dump>service>system bgp-evpn)

Full Context

tools dump service system bgp-evpn

Description

Commands in this context display information about the BGP-EVPN base instance.

Platforms

All

bgp-evpn-multi-homing

Syntax

bgp-evpn-multi-homing

Context

[Tree] (show>redundancy bgp-evpn-multi-homing)

Full Context

show redundancy bgp-evpn-multi-homing

Description

This command shows the information related to the EVPN global timers.

Platforms

All

Output

Sample Output

*A:PE2# show redundancy bgp-evpn-multi-homing 
===============================================================================
Redundancy BGP EVPN Multi-homing Information
===============================================================================
Boot-Timer              : 10 secs                 
Boot-Timer Remaining    : 0 secs                  
ES Activation Timer     : 3 secs                  
===============================================================================

bgp-ipvpn

Syntax

bgp-ipvpn

Context

[Tree] (show>service>id bgp-ipvpn)

Full Context

show service id bgp-ipvpn

Description

This command displays the BGP IPVPN configured parameters for a specified service.

Platforms

All

Output

The following output is an example of BGP IPVPN information, and BGP IPVPN Output Fields describes the output fields.

Table 4. BGP IPVPN Output Fields
Label	Description
Admin State	Specifies the administrative state
VRF Import	Specifies the VRF import
VRF Export	Specifies the VRF export
Route Dist.	Specifies the route disinguisher
Oper Route Dist	Specifies the operational route distinguisher
Oper RD Type	Specifies the operational RD type
Route Target	Specifies the route target
Route Target Impor	Specifies the route target import
Route Target Expor	Specifies the route target export
D-Path Domain-Id	Specifies the D-Path domain ID

Sample Output

# show service id 2000 bgp-ipvpn 
 
===============================================================================
Service 2000 BGP-IPVPN MPLS Information
===============================================================================
Admin State       : Up                  
VRF Import        : None
VRF Export        : None
Route Dist.       : 0:0                 
Oper Route Dist   : 192.0.2.3:64000
Oper RD Type      : auto                
Route Target      : None
Route Target Impor: None
Route Target Expor: None
D-Path Domain-Id  : 65000:1
<snip>

bgp-ls

Syntax

bgp-ls [hunt] [node | link | ipv4-prefix [ipv4-prefix/mask-len]]

Context

[Tree] (show>router>bgp>routes bgp-ls)

Full Context

show router bgp routes bgp-ls

Description

This command displays BGP-Link State (BGP-LS) routes.

Parameters

hunt: Displays detailed information about the routes, including information about the advertised routes (RIB-OUT).

node: Displays BGP-LS link NLRI routes.

link: Displays BGP-LS node NLRI routes.

ipv4-prefix: Displays BGP-LS IPv4-prefix NLRI routes.

ipv4-prefix/prefix-length

Displays the entries matching the specified IPv4 prefix and length.

Values


ipv4-prefix:	a.b.c.d (host bits must be 0)
ipv4-prefix-length:	0 to 32

Platforms

All

Output

The following outputs are examples of information displayed by the bgp-ls command.

Output Sample

# show router bgp routes bgp-ls 
====================================================================
BGP-LS NLRIs
====================================================================
--------------------------------------------------------------------
Type: Node 
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier: 
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
   Name:
   Autonomous System: 
   Area ID:
   Rtr ID:
   Flags:
Type: Link
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier: 
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
   Name:    
   Autonomous System: 
   Area ID:
   Rtr ID:
Remote Node
   Name:
   Autonomous System: 
   Area ID:
   Rtr ID:
Descriptor
   IPv4 Address: 10.10.1.1
Attributes
   Flags:
   IGP Metric: 1000
   Admin-Grp: 0
   Maximum Link BW (kbps): 100000
   Maximum Reservable BW (kbps): 100000
   TE Default Metric: 1000
   Unreserved BW (kbps): 10000
   
Type: IPv4 Prefix 
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier: 
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
   Name:
   Autonomous System: 
   Area ID: 0.0.0.0
   Rtr ID: 10.20.1.6
   Flags:
Prefix descriptor
   IPv4 Address: 10.20.1.6
   Prefix-len: 32
   MT_ID :0
   Route Type :Unknown


# show router bgp routes bgp-ls hunt link
===============================================================================
 BGP Router ID:38.120.48.226    AS:65000       Local AS:65000
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge
 Origin codes  : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP-LS Link NLRIs
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network:
 Type          : LINK-NLRI
 Protocol      : ISIS Level-2           Identifier     : 0xa
 Local Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048184
 Remote Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048223
 Link descriptor:
  IPV4 Interface Addr: 10.0.14.184
  IPV4 Neighbor Addr : 10.0.14.223
Nexthop        : 38.120.48.199
From           : 38.120.48.199
Res. Nexthop   : 0.0.0.0
Local Pref.    : 100                    Interface Name : NotAvailable
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None
Connector      : None
Community      : No Community Members
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 38.120.48.199
Flags          : Valid  Best  IGP
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0
Neighbor-AS    : N/A
Orig Validation: N/A
Source Class   : 0                      Dest Class     : 0
Add Paths Send : Default
Last Modified  : 02h27m50s
-------------------------------------------------------------------------------
Link State Attribute TLVs :
 Administrative group (color) : 0x0
 Maximum link bandwidth : 100000 Kbps
 Max. reservable link bandwidth : 100000 Kbps
 Unreserved bandwidth0 : 100000 Kbps
 Unreserved bandwidth1 : 100000 Kbps
 Unreserved bandwidth2 : 100000 Kbps
 Unreserved bandwidth3 : 100000 Kbps
 Unreserved bandwidth4 : 100000 Kbps
 Unreserved bandwidth5 : 100000 Kbps
 Unreserved bandwidth6 : 100000 Kbps
 Unreserved bandwidth7 : 100000 Kbps
 TE Default Metric : 100
 IGP Metric : 100
 Adjacency Segment Identifier (Adj-SID) :       flags 0x30 weight 0 sid 262136
-------------------------------------------------------------------------------
Network:
 Type          : LINK-NLRI
 Protocol      : ISIS Level-2           Identifier     : 0xa
 Local Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048184
 Remote Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048223
 Link descriptor:
  IPV4 Interface Addr: 10.0.14.184
  IPV4 Neighbor Addr : 10.0.14.223
Nexthop        : 38.120.48.221
From           : 38.120.48.221
Res. Nexthop   : 0.0.0.0
Local Pref.    : 100                    Interface Name : NotAvailable
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None
Connector      : None
Community      : No Community Members
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 38.120.48.221
Flags          : Valid  IGP
TieBreakReason : OriginatorID
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0
Neighbor-AS    : N/A
Orig Validation: N/A
Source Class   : 0                      Dest Class     : 0
Add Paths Send : Default
Last Modified  : 02h27m54s
-------------------------------------------------------------------------------
Link State Attribute TLVs :
 Administrative group (color) : 0x0
 Maximum link bandwidth : 100000 Kbps
 Max. reservable link bandwidth : 100000 Kbps
 Unreserved bandwidth0 : 100000 Kbps
 Unreserved bandwidth1 : 100000 Kbps
 Unreserved bandwidth2 : 100000 Kbps
 Unreserved bandwidth3 : 100000 Kbps
 Unreserved bandwidth4 : 100000 Kbps
 Unreserved bandwidth5 : 100000 Kbps
 Unreserved bandwidth6 : 100000 Kbps
 Unreserved bandwidth7 : 100000 Kbps
 TE Default Metric : 100
 IGP Metric : 100
 Adjacency Segment Identifier (Adj-SID) :       flags 0x30 weight 0 sid 262136
---------------------------------------------

bgp-multi-homing

Syntax

bgp-multi-homing

Context

[Tree] (show>redundancy bgp-multi-homing)

Full Context

show redundancy bgp-multi-homing

Description

This command displays BGP multi-homing information.

Platforms

All

bgp-nh-info

Syntax

bgp-nh-info [location location-id] [bgp-nh ip-address]

Context

[Tree] (show>router>bgp>orr bgp-nh-info)

Full Context

show router bgp optimal-route-reflection bgp-nh-info

Description

This command displays the calculated IGP cost from a particular location ID to all prefixes containing BGP next-hop addresses.

Parameters

location-id

Specifies the ORR location identifier.

Values

1 to 16 (7750 SR-12, VSR)

1 to 255 (all other platforms)

ip-address

Specifies the IPv4 or IPv6 BGP next-hop address.

Values


ipv4-address:	a.b.c.d.
ipv6-address:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x: [0 to FFFF]H
	d: [0 to 255]D

Platforms

All

Output

The following table describes the command output fields for the show router bgp optimal-route-reflection bgp-nh-info command output.

Table 5. ORR bgp-nh-info Fields
Label	Description
Next Hop Loc	The address of the next-hop location.
Dest-Prefix	Displays the longest prefix match for the BGP next-hop address from the point of view of a specific location. Displays "unreachable” if no route exists to the BGP next-hop from the location.
DB-Source	Displays the source of the reachability information in the TE database.
Type	Displays the type of route or reachability, either intra-area or inter-area.
Proto	Displays the source protocol that is providing reachability to the BGP next-hop address.
Metric	Displays the IGP cost to reach the BGP next-hop from the location reference point.
Preference	Displays the routing preference of the route that is providing reachability to the BGP next-hop address. This is derived from standard protocol preference values.

Sample Output

*A:Dut-C# show router bgp optimal-route-reflection bgp-nh-info
===============================================================================
ORR BGP-NH Table (Router: Base)
===============================================================================
Location 1:
    Primary        : 1.1.1.1
    Secondary      : -
    Tertiary       : -
    Primary-ipv6   : 2001::1
    Secondary-ipv6 : -
    Tertiary-ipv6  : -
Age          : 00h00m00s
Spf wait     : 60
Initial wait : 5
Second wait  : 15
-------------------------------------------------------------------------------
Next Hop
   Loc    Dest-Prefix
                               DB-Source  Type         Proto     Metric    Pref
-------------------------------------------------------------------------------
10.0.0.10
    1     Unreachable
192.0.2.1
    1     Unreachable
-------------------------------------------------------------------------------
No. of BGP-NHs: 2
===============================================================================

bgp-peering-policy

Syntax

bgp-peering-policy [policy-name]

Context

[Tree] (show>subscr-mgmt bgp-peering-policy)

Full Context

show subscriber-mgmt bgp-peering-policy

Description

This command displays BGP peering policy information.

Parameters

policy-name: Specifies the BPG peering policy name, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

bgp-route-distinguisher

Syntax

bgp-route-distinguisher [vprn] [vpls] [epipe]

bgp-route-distinguisher svc

bgp-route-distinguisher ad-evi-rt-set

bgp-route-distinguisher system

Context

[Tree] (show>service>system bgp-route-distinguisher)

Full Context

show service system bgp-route-distinguisher

Description

This command displays the BGP operational route distinguishers (RDs) used by all the BGP-enabled services in the system. The information can be filtered by service: VPRN, VPLS, or Epipe. The output can also be filtered to show only the relevant RD information related to services ( svc), or the EVPN Auto-Discovery routes (ad-evi-rt-set), or the system RDs (system).

Platforms

All

Output

The following is an example of service BGP RD information.

Auto-rd                    <none>
Ethernet-segment           <none>
EVI RT Set RD Range        1.2.3.6:1-1.2.3.6:512               configured
// the above is the case when the "Extended Evi Range" is disabled.
// When enabled :it is "1.2.3.6:1-1.2.3.6:65535"

Sample Output

*A:PE-2# show service system bgp-route-distinguisher 
===============================================================================
Service Route Distinguishers
===============================================================================
Svc Id     Type  Oper Route-Distinguisher         Route-Distinguisher
-------------------------------------------------------------------------------
501        vprn  192.0.2.2:60000                  auto
800        vprn  192.0.2.2:60001                  auto
1          vpls  192.0.2.2:1                      configured
1          vpls  192.0.2.2:2                      configured
101        vpls  192.0.2.2:101                    configured
101        vpls  192.0.2.2:102                    configured
500        vpls  192.0.2.2:500                    derivedEvi
600        vpls  192.0.2.2:600                    derivedEvi
804        vpls  192.0.2.2:804                    derivedEvi
701        epipe 192.0.2.2:701                    derivedEvi
702        epipe 192.0.2.2:702                    derivedEvi
-------------------------------------------------------------------------------
Number of RD Entries: 11
===============================================================================
===============================================================================
Service System BGP Route Distinguisher Information
===============================================================================
                    Oper Route Distinguisher                        Type
-------------------------------------------------------------------------------
Auto-rd             192.0.2.2:60000-192.0.2.2:65000                 configured
Ethernet-segment    192.0.2.2:0                                     default
EVI RT Set RD Range 1.2.3.6:1-1.2.3.6:512                           configured
// the above is the case when the "Extended Evi Range" is disabled.
// When enabled :it is "1.2.3.6:1-1.2.3.6:65535"
===============================================================================
===============================================================================
BGP EVPN Ethernet Segment AD EVI RT Set Route Distinguishers
===============================================================================
Eth Seg                          EVI     Svc ID     Route Distinguisher
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Entries: 0
===============================================================================
*A:PE-2# show service system bgp-route-distinguisher vpls 
===============================================================================
Service Route Distinguishers
===============================================================================
Svc Id     Type  Oper Route-Distinguisher         Route-Distinguisher
-------------------------------------------------------------------------------
1          vpls  192.0.2.2:1                      configured
1          vpls  192.0.2.2:2                      configured
101        vpls  192.0.2.2:101                    configured
101        vpls  192.0.2.2:102                    configured
500        vpls  192.0.2.2:500                    derivedEvi
600        vpls  192.0.2.2:600                    derivedEvi
804        vpls  192.0.2.2:804                    derivedEvi
-------------------------------------------------------------------------------
Number of RD Entries: 7
===============================================================================
===============================================================================
Service System BGP Route Distinguisher Information
===============================================================================
                    Oper Route Distinguisher                        Type
-------------------------------------------------------------------------------
Auto-rd             192.0.2.2:60000-192.0.2.2:65000                 configured
Ethernet-segment    192.0.2.2:0                                     default
EVI RT Set RD Range <none>                                          
===============================================================================
===============================================================================
BGP EVPN Ethernet Segment AD EVI RT Set Route Distinguishers
===============================================================================
Eth Seg                          EVI     Svc ID     Route Distinguisher
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Entries: 0
===============================================================================

bgp-vpws

Syntax

bgp-vpws

Context

[Tree] (show>service>id bgp-vpws)

Full Context

show service id bgp-vpws

Description

This command displays BGP VPWS related information for the service.

Platforms

All

Output

The following output is an example of BGP VPWS information.

Sample Output

*A:cses-E11>config>service>epipe>bgp-vpws# show service id 2 bgp-vpws
===============================================================================
BGP VPWS Information
===============================================================================
Admin State          : Enabled
VE Name              : PE1                  VE Id            : 1
PW Template          : 2
Route Dist           : 65536:3
Rte-Target Import    : 65536:2              Rte-Target Export: 65536:2

PW-Template Id       : 2
Import Rte-Tgt       : None
-------------------------------------------------------------------------------
Remote-Ve Information
-------------------------------------------------------------------------------
Remote VE Name       : PE2                  Remote VE Id     : 2
===============================================================================
*A:cses-E11>config>service>epipe>bgp-vpws#

bier

Syntax

bier

Context

[Tree] (clear>router bier)

Full Context

clear router bier

Description

Commands in this context clear and reset BIER entities.

Platforms

All

bier

Syntax

bier

Context

[Tree] (show>router bier)

Full Context

show router bier

Description

Commands in this context display BIER information.

Platforms

All

bier-info

Syntax

bier-info [system-id | lsp-id] [level level]

Context

[Tree] (show>router>isis bier-info)

Full Context

show router isis bier-info

Description

This command displays IS-IS BIER sub-TLV information.

Parameters

system-id: Specifies the system ID, up to 72 characters.

lsp-id: Specifies the LSP ID, up to 72 characters.

Platforms

All

bin-group

Syntax

bin-group bin-group-number [detail]

Context

[Tree] (show>oam-pm bin-group)

Full Context

show oam-pm bin-group

Description

Show the configuration data for one or all OAM Performance Monitoring bin groups.

Parameters

bin-group-number

Specifies an OAM Performance Monitoring bin group.

Values: 1 to 255

detail: Keyword to display additional exclusion and event monitoring information for the bin group.

Platforms

All

Output

The following is an example of OAM-PM bin group information.

Sample Output

show oam-pm bin-group
-------------------------------------------------------------------------------
Configured Lower Bounds for Delay Tests, in microseconds
-------------------------------------------------------------------------------
Group Description                    Admin Bin     FD(us)    FDR(us)   IFDV(us)
-------------------------------------------------------------------------------
1     OAM PM default bin group (not*    Up   0          0          0          0
                                             1       5000       5000       5000
                                             2      10000          -          -
-------------------------------------------------------------------------------
2                                       Up   0          0          0          0
                                             1          1        500        250
                                             2        500       1000        500
                                             3       1000       1500       1000
                                             4       2000       2000       1500
                                             5       3000       2500       2000
                                             6       4000       3000       2500
                                             7       5000       3500       3000
                                             8       5500       4000       3500
                                             9       6500       4500       4000
-------------------------------------------------------------------------------
3                                       Up   0          0          0          0
                                             1          1        500        250
                                             2        500       1000        500
                                             3       1000       1500       1000
                                             4       2000       2000       1500
                                             5       3000       2500       2000
                                             6       4000       3000       2500
                                             7       5000       3500       3000
                                             8       5500       4000       3500
                                             9       6500       4500       4000
-------------------------------------------------------------------------------
* indicates that the corresponding row element may have been truncated.


show oam-pm bin-group 3 detail
-------------------------------------------------------------------------------
Configured Lower Bounds for Delay Tests, in microseconds
-------------------------------------------------------------------------------
Group Description                    Admin Bin     FD(us)    FDR(us)   IFDV(us)
-------------------------------------------------------------------------------
3                                       Up   0          0          0          0
                                             1          1        500        250
                                             2        500       1000        500
                                             3       1000       1500       1000
                                             4       2000       2000       1500
                                             5       3000       2500       2000
                                             6       4000       3000       2500
                                             7       5000       3500       3000
                                             8       5500       4000       3500
                                             9       6500       4500       4000
-------------------------------------------------------------------------------

---------------------------------------
Bins Excluded from Average
---------------------------------------
Bin Type     Direction            Bins
---------------------------------------
FD          round-trip             0,9
---------------------------------------

--------------------------------------------------------------------------
Delay Events Configured
--------------------------------------------------------------------------
Bin Type    Direction    Lowest Bin    Lower Bound (us)    Raise    Clear
--------------------------------------------------------------------------
FD         round-trip             8                5500      100     none
--------------------------------------------------------------------------

--------------------------------------------------------------------
Bins Excluded from Delay Event Count
--------------------------------------------------------------------
Bin Type     Direction     Lowest Excluded Bin     Lower Bound (us)
--------------------------------------------------------------------
FD          round-trip                       9                 6500
--------------------------------------------------------------------

--------------------------------------------------------------------------
Delay Events Configured
--------------------------------------------------------------------------
Bin Type    Direction    Lowest Bin    Lower Bound (us)    Raise    Clear
--------------------------------------------------------------------------
FD            forward             3                1000      200     none
--------------------------------------------------------------------------

--------------------------------------------------------------------
Bins Excluded from Delay Event Count
--------------------------------------------------------------------
Bin Type     Direction     Lowest Excluded Bin     Lower Bound (us)
--------------------------------------------------------------------
FD             forward                       4                 2000
--------------------------------------------------------------------

bin-group-using

Syntax

bin-group-using [bin-group bin-group-number]

Context

[Tree] (show>oam-pm bin-group-using)

Full Context

show oam-pm bin-group-using

Description

Show the list of sessions configured against one or all OAM Performance Monitoring bin groups.

Parameters

bin-group-number

Specifies an OAM Performance Monitoring bin group.

Values: 1 to 255

Platforms

All

Output

The following is an example of OAM-PM bin group session information.

Sample Output

show oam-pm bin-group-using
=========================================================================
OAM Performance Monitoring Bin Group Configuration for Sessions
=========================================================================
Bin Group       Admin   Session                            Session State
-------------------------------------------------------------------------
2               Up      vpls1000-PM-AL5-1/1/9:1000.1000              Act
-------------------------------------------------------------------------
3               Up      vpls1000-PM-YL4-1/1/9:1000.1000              Act
-------------------------------------------------------------------------
========================================================================= 
Admin: State of the bin group
Session State: The state of session referencing the bin-group


show oam-pm bin-group-using bin-group 2
=========================================================================
OAM Performance Monitoring Bin Group Configuration for Sessions
=========================================================================
Bin Group       Admin   Session                            Session State
-------------------------------------------------------------------------
2               Up      vpls1000-PM-AL5-1/1/9:1000.1000              Act
-------------------------------------------------------------------------
=========================================================================
Admin: State of the bin group
Session State: The state of session referencing the bin-group

binding-label

Syntax

binding-label [label] [detail]

binding-label [label] egress-stats

binding-label [label] ingress-stats

Context

[Tree] (show>router>mpls>forwarding-policies binding-label)

Full Context

show router mpls forwarding-policies binding-label

Description

This command displays the MPLS forwarding policy binding label information.

Parameters

label

Specifies the label value.

Values: 32 to 1048575

detail: Displays detailed information of the binding label.

egress-stats: Displays the egress statistics, if any, of all the instances of the specified forwarding policy.

ingress-stats: Displays ingress statistics information.

Platforms

All

Output

MPLS Binding Label Output Fields describes MPLS binding label output fields.

Table 6. MPLS Binding Label Output Fields
Label	Description
Label	Specifies the label number.
Preference	Specifies the preference.
Oper State	Specifies the operational state (up \| down).
Policy Name	Specifies the MPLS forwarding policies binding label name.
No. of Binding Labels	Specifies the number of binding labels.
OperDown Reason	Specifies the reason for being operationally down.
Down Time	Specifies the downtime date and time.
NumNextHopGrps	Specifies the number of next-hop groups.
Ingress Stats	Specifies if ingress stats are enabled for collection (disabled \| enabled).
IngOperState	Specifies the ingress operational state (up \| down)
Revert Timer	Specifies the revert timer value.
Retry Count	Specifies the retry count.
Next Retry In	Specifies the next retry value.
Next-hop Group	Specifies the next-hop group.
Resolution Type	Specifies the resolution type (direct \| indirect).
Num Revert	Specifies the number of reverts.
Num Failover	Specifies the number of failovers.
Next Revert In	Specifies the next revert interval.
Primary nexthop	Specifies the IP address of the primary next-hop.
Resolved	Specifies the resolved status (false \| true).
NHopDownReason	Specifies the reason for the next-hop down.
Backup nexthop	Specifies the IP address of the backup next-hop.
StatsOperState	Specifies if a statistic index is allocated to the next-hop.
EgrStatsState	Specifies if all next-hops have a statistic index allocated.

Sample Output

===============================================================================
*A:Dut-C> show router mpls forwarding-policies binding-label 
  - binding-label [<label>] [detail]
*A:Dut-C> show router mpls forwarding-policies binding-label 
===============================================================================
Binding Label
===============================================================================
   Label                      Preference               Oper State
Policy Name                                            
-------------------------------------------------------------------------------
   33                         253                      Down
indirect1
-------------------------------------------------------------------------------
No. of Binding Labels: 1
===============================================================================
*A:Dut-C> show router mpls forwarding-policies binding-label detail 
===============================================================================
Binding Label (Detail)
===============================================================================
Label          : 33                     Preference     : 253
Policy Name    : indirect1
Oper State     : Down                   OperDownReason : notApplicable
Down Time      : 09/28/2018 19:53:33    NumNextHopGrps : 1
Ingress Stats  : Disabled               IngrOperState  : Down
Revert Timer   : 600                    
Retry Count    : 0                      Next Retry In  : 0
Next-hop Group : 1                      Resolution Type: indirect
Oper State     : Down                   OperDownReason : notApplicable
Num Revert     : 0                      Num Failover   : 0
Next Revert In : 0                      
Primary nexthop: 4.4.4.4
Resolved       : False                  NHopDownReason : notApplicable
Backup nexthop : 3.3.3.3
Resolved       : False                  NHopDownReason : notApplicable
-------------------------------------------------------------------------------

show router mpls forwarding-policies binding-label 400001 egress-stats
===============================================================================
Binding Label (Detail)
===============================================================================
Label          : 400001                Preference        : 255 
Policy Name    : cc                    Oper State        : Up
EgrStatsState  : Up
 Next-hop Group   : 1                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
 Next-hop Group   : 2                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000             
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000 
Total Aggr        :
   Aggr Pkts: 44000                    Aggr Octets: 46200000
-------------------------------------------------------------------------------
===============================================================================

binding-label

Syntax

binding-label label ingress-stats [interval seconds] [repeat repeat] [ absolute | rate]

Context

[Tree] (monitor>router>mpls>forwarding-policies binding-label)

Full Context

monitor router mpls forwarding-policies binding-label

Description

This command monitors statistics for Forwarding Policy Binding Label.

Parameters

label

Specifies the label value.

Values: 32 to 1048575

ingress-stats: Displays ingress statistics information.

seconds

Configures the interval for each display in seconds.

Values: 3 to 60

Default: 10

repeat

Configures how many times the command is repeated.

Values: 1 to 999

Default: 10

absolute: Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate: Displays rate-per-second for each statistic instead of the delta.

Platforms

All

binding-label

Syntax

binding-label label ingress-stats

Context

[Tree] (clear>router>mpls>forwarding-policies binding-label)

Full Context

clear router mpls forwarding-policies binding-label

Description

This command clears or resets statistics for the MPLS forwarding policy binding label.

Parameters

label

Specifies the label value.

Values: 32 to 1048575

ingress-stats: Displays ingress statistics information.

Platforms

All

bindings

Syntax

bindings [mac ieee-address]

Context

[Tree] (show>subscr-mgmt>vrgw>brg>gateway bindings)

Full Context

show subscriber-mgmt vrgw brg gateway bindings

Description

This command lists all the DHCP bindings of the local pool associated with the specified BRG. If the MAC attribute is specified, only the binding for that MAC address is displayed.

Parameters

ieee-address: specifies the MAC address identifying a specific binding.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of BRG gateway binding information.

Sample Output

Node# show subscriber-mgmt brg gateway brg-id "00:00:00:00:00:05" bindings
===============================================================================
Bridged Residential Gateway home-aware pool address bindings
===============================================================================
Home-aware pool              : 00:00:00:00:00:05
-------------------------------------------------------------------------------
MAC address                  : 00:02:00:00:00:19
IP address                   : 21.0.0.20
Allocation type              : dynamic
DHCP lease                   : true
Remaining lease time         : 489
Lease start time             : 2016/01/18 17:44:44
MAC address                  : 00:02:00:00:00:1a
IP address                   : 21.0.0.21
Allocation type              : dynamic
DHCP lease                   : true
Remaining lease time         : 493
Lease start time             : 2016/01/18 17:44:48
MAC address                  : 00:02:00:00:00:1b
IP address                   : 21.0.0.22
Allocation type              : dynamic
DHCP lease                   : true
Remaining lease time         : 497
Lease start time             : 2016/01/18 17:44:52
-------------------------------------------------------------------------------
No. of bindings: 3
===============================================================================

bindings

Syntax

bindings

Context

[Tree] (show>router>ldp bindings)

Full Context

show router ldp bindings

Description

This command displays LDP bindings information.

Platforms

All

Output

The following output is an example of LDP bindings information.

Sample Output

*A:Dut-A# show router ldp bindings active                              

========================================================================
Legend: U - Label In Use,  N - Label Not In Use, W - Label Withdrawn
        WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
        (S) - Static       (M) - Multi-homed Secondary Support
        (B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
========================================================================
LDP IPv4 Prefix Bindings (Active)
========================================================================
Prefix                  Op   IngLbl    EgrLbl    EgrIntf/LspId  EgrNextHop
------------------------------------------------------------------------
10.20.1.1/32            Pop  131071      --        --             --
10.20.1.2/32            Push   --      131071    1/1/1          10.10.1.2
10.20.1.2/32            Swap 131070    131071    1/1/1          10.10.1.2
10.20.1.2/32            Push   --      262141BU  1/1/2          10.10.2.3
10.20.1.2/32            Swap 131070    262141BU  1/1/2          10.10.2.3
10.20.1.3/32            Push   --      131069BU  1/1/1          10.10.1.2
10.20.1.3/32            Swap 131069    131069BU  1/1/1          10.10.1.2
10.20.1.3/32            Push   --      262143    1/1/2          10.10.2.3
10.20.1.3/32            Swap 131069    262143    1/1/2          10.10.2.3
10.20.1.4/32            Push   --      131068    1/1/1          10.10.1.2
10.20.1.4/32            Swap 131068    131068    1/1/1          10.10.1.2
10.20.1.4/32            Push   --      262140BU  1/1/2          10.10.2.3
10.20.1.4/32            Swap 131068    262140BU  1/1/2          10.10.2.3
10.20.1.5/32            Push   --      131067BU  1/1/1          10.10.1.2
10.20.1.5/32            Swap 131067    131067BU  1/1/1          10.10.1.2
10.20.1.5/32            Push   --      262139    1/1/2          10.10.2.3
10.20.1.5/32            Swap 131067    262139    1/1/2          10.10.2.3
10.20.1.6/32            Push   --      131066    1/1/1          10.10.1.2
10.20.1.6/32            Swap 131066    131066    1/1/1          10.10.1.2
10.20.1.6/32            Push   --      262138BU  1/1/2          10.10.2.3
10.20.1.6/32            Swap 131066    262138BU  1/1/2          10.10.2.3
------------------------------------------------------------------------

-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 10
===============================================================================

===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix                                      Op              IngLbl    EgrLbl
EgrNextHop                                  EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id                                     Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
===============================================================================
P2MP-Id                                     Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group                                       Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group                                       Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group                                       RD              Op
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group                                       RD              Op
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================


*A:Dut-A# show router ldp bindings                               

========================================================================
LDP Bindings (IPv4 LSR ID 10.1.1.1:0)
             (IPv6 LSR ID ::[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
        S - Status Signaled Up,  D - Status Signaled Down
        E - Epipe Service, V - VPLS Service, M - Mirror Service
        A - Apipe Service, F - Fpipe Service, I - IES Service, R - VPRN service
        P - Ipipe Service, WP - Label Withdraw Pending, C - Cpipe Service
        BU - Alternate For Fast Re-Route, TLV - (Type, Length: Value)
===============================================================================
LDP IPv4 Prefix Bindings
========================================================================
Prefix             Peer            IngLbl     EgrLbl EgrIntf/    EgrNextHop
                                                    LspId       
------------------------------------------------------------------------
10.20.1.1/32       10.20.1.2       131071U     --     --          --
10.20.1.1/32       10.20.1.3       131071U     --     --          --
10.20.1.2/32       10.20.1.2         --       131071 1/1/1       10.10.1.2
10.20.1.2/32       10.20.1.3       131070U    262141 1/1/2       10.10.2.3
10.20.1.3/32       10.20.1.2       131069U    131069 1/1/1       10.10.1.2
10.20.1.3/32       10.20.1.3         --       262143 1/1/2       10.10.2.3
10.20.1.4/32       10.20.1.2       131068N    131068 1/1/1       10.10.1.2
10.20.1.4/32       10.20.1.3       131068BU   262140 1/1/2       10.10.2.3
10.20.1.5/32       10.20.1.2       131067U    131067 1/1/1       10.10.1.2
10.20.1.5/32       10.20.1.3       131067N    262139 1/1/2       10.10.2.3
10.20.1.6/32       10.20.1.2       131066N    131066 1/1/1       10.10.1.2
10.20.1.6/32       10.20.1.3       131066BU   262138 1/1/2       10.10.2.3
------------------------------------------------------------------------
No. of IPv4 Prefix Bindings: 12
========================================================================

===============================================================================
LDP IPv6 Prefix Bindings
===============================================================================
Prefix                                      IngLbl                    EgrLbl
Peer                                        EgrIntf/LspId
EgrNextHop
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP Generic IPv4 P2MP Bindings
===============================================================================
P2MP-Id
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
100
10.1.1.1                                    Unknw             --      131051
10.90.90.2                                  1/1/6
10.2.2.2:0

104
10.1.1.1                                    Unknw             --      131050
10.90.90.2                                  1/1/6
10.2.2.2:0

600
10.1.1.1                                    Unknw             --      131049
10.90.90.2                                  1/1/6
10.2.2.2:0

700
10.1.1.1                                    Unknw             --      131048
10.90.90.2                                  1/1/6
10.2.2.2:0

800
10.1.1.1                                    Unknw             --      131047
10.90.90.2                                  1/1/6
10.2.2.2:0

900
10.1.1.1                                    Unknw             --      131046
10.90.90.2                                  1/1/6
10.2.2.2:0

1500
10.1.1.1                                    Unknw             --      131045
10.90.90.2                                  1/1/6
10.2.2.2:0

100
10.6.6.6                                    Unknw             --      131044
10.90.90.2                                  1/1/6
10.2.2.2:0

900
10.6.6.6                                    Unknw             --      131043
10.90.90.2                                  1/1/6
10.2.2.2:0

-------------------------------------------------------------------------------
No. of Generic IPv4 P2MP Bindings: 9
===============================================================================

===============================================================================
LDP Generic IPv6 P2MP Bindings
===============================================================================
P2MP-Id
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings
===============================================================================
Source
Group
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings
===============================================================================
Source
Group
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings
===============================================================================
Source
Group                                       RD
RootAddr                                    Interface         IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
10.1.1.1
225.0.0.1                                  10.1.1.1:100
10.3.3.3                                   Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
10.3.3.3                                   Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
10.3.3.3                                   Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
-------------------------------------------------------------------------------
No. of In-Band-VPN-SSM IPv4 P2MP Bindings: 3
===============================================================================
 
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings
===============================================================================
===============================================================================
Source
Group                                       RD
RootAddr                                    Interface         IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
10.1.1.1
225.0.0.1                                  10.1.1.1:100
2000::3000                                 Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
2000::3000                                 Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
2000::3000                                 Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
-------------------------------------------------------------------------------
No. of In-Band-VPN-SSM IPv6 P2MP Bindings: 3
===============================================================================

===============================================================================
LDP Service FEC 128 Bindings
===============================================================================
Type                                          VCId       SDPId     IngLbl  LMTU
Peer                                          SvcId                EgrLbl  RMTU
-------------------------------------------------------------------------------
?-Eth                                         100        R. Src      --    None
10.2.2.2:0                                     Ukwn                 131023D 986

?-Eth                                         500        R. Src      --    None
10.2.2.2:0                                     Ukwn                 131022D 1386

?-Eth                                         2001       R. Src      --    None
10.2.2.2:0                                     Ukwn                 131019D 986

?-Eth                                         2003       R. Src      --    None
10.2.2.2:0                                     Ukwn                 131017D 986

?-Ipipe                                       1800       R. Src      --    None
10.2.2.2:0                                     Ukwn                 131014D 1486

-------------------------------------------------------------------------------
No. of VC Labels: 5
===============================================================================

===============================================================================
LDP Service FEC 129 Bindings
===============================================================================
SAII                                            AGII        IngLbl    LMTU
TAII                                            Type        EgrLbl    RMTU
Peer                                            SvcId       SDPId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

bluetooth

Syntax

bluetooth [device-mac [ieee-address] | module [ cpm-slot]]

Context

[Tree] (show>system bluetooth)

Full Context

show system bluetooth

Description

This command displays detailed information about the Bluetooth configuration on the CPM or chassis.

Parameters

ieee-address

Specifies the source MAC address.

Values: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx

cpm-slot

Specifies the CPM slot.

Values: A , B, C, D

Platforms

7750 SR-1, 7750 SR-s, 7950 XRS-20e

Output

The following is an example of Bluetooth configuration information. System Bluetooth Field Descriptions describes the output fields.

Sample Output

*A:bkvm18>show>system# bluetooth
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
*A:bkvm18>show>system# bluetooth device
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
Bluetooth Devices
========================================
Device            : 00:22:33:44:55:66
Description       : peter's ipad
Device            : 11:22:33:44:55:66
Description       : (Not Specified)
Device            : 22:22:33:44:55:66
Description       : description
-------------------------------------------------------------------------------
Number of Devices : 3
========================================
*A:bkvm18>show>system# bluetooth device  00:22:33:44:55:66
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
========================================
Bluetooth Devices
========================================
Device            : 00:22:33:44:55:66
Description       : peter's ipad
========================================
*A:bkvm18>show>system# bluetooth module
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
===============================================================================
Bluetooth Modules
===============================================================================
Module                : A
Connected Device      : Yes 
Device Mac            : 00:22:33:44:55:66
Device Description    : peter's ipad
Configured Identifier : (Not Configured)
Operational Identifier: 7750-SR-14s-CPM-A-NS123456
Module                : B
Connected Device      : No
Device Mac            :
Device Description    :
Configured Identifier : (Not Configured)
Operational Identifier: 7750-SR-14s-CPM-B-NS654321
===============================================================================
*A:bkvm18>show>system# bluetooth module "A"
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
===============================================================================
Bluetooth Modules
===============================================================================
Module                : A
Connected Device      : Yes 
Device Mac            : 00:22:33:44:55:66
Device Description    : peter's ipad
Configured Identifier : (Not Configured)
Operational Identifier: 7750-SR-14s-CPM-A-NS123456
===============================================================================*

Table 7. System Bluetooth Field Descriptions
Label	Description
Passkey	The Bluetooth passkey in use by the system.
Advertising Timeout	The amount of time the Bluetooth will advertise that it is ready to pair.
Power State	The operating mode for Bluetooth.
Pairing Button	Displays whether the pairing button is enabled for use.
Device	The MAC address of the Bluetooth device.
Description	The customer-entered description for the Bluetooth device.
Module	Displays which CPM module contains the Bluetooth device.
Connected Device	Displays if there is a device actively paired to the module.
Device MAC	The MAC address of the Bluetooth device connected to the module.
Device Description	The description associated with the connected Bluetooth device.
Configured Identifier	The customer-defined Bluetooth identifier for the module.
Operational Identifier	The Bluetooth identifier in use for the module.

bluetooth

Syntax

bluetooth

Context

[Tree] (tools>perform>system bluetooth)

Full Context

tools perform system bluetooth

Description

Commands in this context are related to the Bluetooth interface.

Platforms

7750 SR-1, 7750 SR-s, 7950 XRS-20e

bmp

Syntax

bmp

Context

[Tree] (clear>router bmp)

[Tree] (clear>service>id bmp)

Full Context

clear router bmp

clear service id bmp

Description

Commands in this context clear and reset BGP Monitoring Protocol (BMP) station connections.

Platforms

All

bmp

Syntax

bmp

Context

[Tree] (show>service>id bmp)

[Tree] (show>router bmp)

Full Context

show service id bmp

show router bmp

Description

Commands in this context display BGP related information.

Platforms

All

bmp

Syntax

bmp

Context

[Tree] (show bmp)

Full Context

show bmp

Description

Commands in this context display BGP Monitoring Protocol (BMP) information.

Platforms

All

bof

Syntax

bof [cflash-id | booted]

Context

[Tree] (show bof)

Full Context

show bof

Description

This command displays the Boot Option File (BOF) executed on last system boot or on the specified device.

If no device is specified, the BOF used in the last system boot displays. If the BOF has been modified since the system boot, a message displays.

Note:

This command is not available in the MD-CLI. Use the MD-CLI admin show configuration bof command or the info command in the bof configuration region.

Parameters

cflash-id

Displays the cflash directory name. The slot name is not case-sensitive. Use upper or lowercase "A” or "B” for the slot name.

Values: cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:

booted: displays the boot option file used to boot the system.

Platforms

All

Output

The following output is an example of BOF, and Show BOF Output Fields describes the output fields.

Sample Output

A:ALA-1# show bof cf3:
=====================================================================
BOF on cf3:
=====================================================================
autonegotiate
primary-image    ftp://test:test@192.168.xx.xx/./both.tim
primary-config   ftp://test:test@192.168.xx.xx/./1xx.cfg
secondary-image  cf1:/i650/
secondary-config cf1:/config.cfg
address          192.168.xx.xxx/20 active
address          192.168.xx.xxx/20 standby
primary-dns      192.168.xx.xxx
dns-domain       test.test.com
autonegotiate
duplex           full
speed            100
wait             2
persist          off
    console-speed    115200
===============================================================================
A:ALA-1# 
A:ALA-1# show bof booted
=====================================================================
System booted with BOF
=====================================================================
primary-image    ftp://test:test@192.168.xx.xx/./both.tim
   primary-config   ftp://test:test@192.168.xx.xx/./103.cfg
   secondary-image  cf1:/i650/
   secondary-config cf1:/config.cfg
   address          192.168.xx.xxx/20 active
   address          192.168.xx.xxx/20 standby
   primary-dns      192.168.xx.xxx
   dns-domain       test.test.com
   autonegotiate
   duplex           full
   speed            100
   wait             2
persist          off
    console-speed    115200
===============================================================================
A:ALA-1#

Table 8. Show BOF Output Fields
Label	Description
primary-image	The primary location of the directory that contains the runtime images of both CPM and XCM/IOM.
primary-config	The primary location of the file that contains the configuration.
primary-dns	The primary DNS server for resolution of host names to IP addresses.
secondary-image	The secondary location of the directory that contains the runtime images of both CPM and XCM/IOM.
secondary-config	The secondary location of the file that contains the configuration.
secondary-dns	The secondary DNS server for resolution of host names to IP addresses.
tertiary-image	The tertiary location of the directory that contains the runtime images of both CPM and XCM/IOM.
tertiary-config	The tertiary location of the file that contains the configuration.
address	The IP address and mask associated with the CPM Ethernet port or the secondary CPM port.
tertiary-dns	The tertiary DNS server for resolution of host names to IP addresses.
persist	on — Persistent indexes between system reboots is enabled. off — Persistent indexes between system reboots is disabled.
wait	The time configured for the boot to pause while waiting for console input.
autonegotiate	no autonegotiate — Autonegotiate not enabled. autonegotiate — Autonegotiate is enabled.
duplex	half — Specifies that the system uses half duplex. full — Specifies that the system uses full duplex.
speed	The speed of the CPM Ethernet interface.
console speed	The console port baud rate.
dns domain	The domain name used when performing DNS address resolution.
uplinkA-address	Displays the Uplink-A IP address.
uplinkA-port	Displays the primary port to be used for auto-boot.
uplinkA-route	Displays the static route associated with Uplink-A.
uplinkA-vlan	Displays the VLAN ID to be used on Uplink-A.
uplinkB-address	Displays the Uplink-B IP address.
uplinkB-port	Displays the secondary port to be used for auto-boot.
uplinkB-route	Displays the static route associated with Uplink-B.
uplinkB-vlan	Displays the VLAN ID to be used on Uplink-B.
uplink-mode	Displays the uplink mode of the device.
no-service-ports	Displays the ports on which service traffic is not processed.
use-expansion-card-type	The expansion card type.
system-profile	The system profile used by the system when it is rebooted.

bonding

Syntax

bonding [detail]

bonding bonding-id bonding-id [ detail]

Context

[Tree] (show>service bonding)

Full Context

show service bonding

Description

This command displays an overview of active bonding contexts and the associated access connections.

When a bonding ID is specified, only information for that specific context is displayed.

Parameters

bonding-id: Specifies the ID of a specific bonding context.

detail: Displays additional detailed bonding settings, such as load-balancing.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is an example of bonding information.

Sample Output

Node# show service bonding
===============================================================================
Bonding Summary
===============================================================================
-------------------------------------------------------------------------------
Bond1 - svc:40 - itf:grp_itf_bonding
-------------------------------------------------------------------------------
 1 - PPP  - svc:30 - sap:1/1/3:1 - mac:00:00:00:00:00:01 - sid:1
 2 - IPOE - svc:11 - sap:pxc-1.b:1.8 - mac:00:03:ff:f0:01:00
-------------------------------------------------------------------------------
===============================================================================
show service bonding bonding-id Bond1 detail
===============================================================================
Bonding Summary
===============================================================================
-------------------------------------------------------------------------------
Bond1 - svc:40 - itf:grp_itf_bonding
-------------------------------------------------------------------------------
 1 - PPP  - svc:30 - sap:1/1/3:1 - mac:00:00:00:00:00:01 - sid:1
 2 - IPOE - svc:11 - sap:pxc-1.b:1.8 - mac:00:03:ff:f0:01:00
-------------------------------------------------------------------------------
Reference rate                : 10000000 kbps
Low threshold rate            : 8000000 kbps
High threshold rate           : 9000000 kbps
Initial load-balancing weight : 100%
Load-balancing weight change  : 5%
Current load-balancing weight : 100%
-------------------------------------------------------------------------------
===============================================================================

bonding

Syntax

bonding

bonding eval-rates

Context

[Tree] (tools>perform>subscr-mgmt bonding)

Full Context

tools perform subscriber-mgmt bonding

Description

This command enables the tools used for hybrid access bonding.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

boot-messages

Syntax

boot-messages

Context

[Tree] (show boot-messages)

Full Context

show boot-messages

Description

This command displays boot messages generated during the last system boot.

Platforms

All

Output

The following output is an example of a boot-message.

Sample Output

*A:raven14s# show boot-messages
===============================================================================
cf3:/bootlog.txt
===============================================================================
Boot log started on CPU#0
  Build: X-0.0.I5679 on Mon Oct  1 18:08:38 PDT 2018 by builder
  CPUCTL FPGA version: 17
Boot rom version is v54
CPU Control FPGA version is 0x17
Multicore RAM test using 10 cores
>>>Testing  SDRAM from 0x0000000002200000 to 0x0000000080000000
>>>Testing  SDRAM from 0xffffffffe0000000 to 0xfffffffffe000000
>>>Testing  SDRAM from 0x0000000080000000 to 0x00000003e4000000
>>>Testing Compact Flash 1... Slot Empty
>>>Testing Compact Flash 2... Slot Empty
>>>Testing Compact Flash 3... OK (STEC M2+ CF 9.0.2)
Board Serial Number is 'NS184100464'
Platforms in Chassis EEProm 1 is 0x1
Chassis type 34 (sr14s_r1) found in Chassis EEProm 1
Chassis Serial Number is 'NS173300113'
Searching for boot.ldr on local drives:
Searching cf3 for boot.ldr...
*************************************************************************************************
Total Memory: 16GB  Chassis Type: sr14s_r1 (0x22)  Card Type: pegasus_r1 (0x42)  [IOCTRL Ver:0x17 Date:not-available]   Git: [ Tag/Hash: TiMOS_16_0_R4-g49edf4fa7f67; branch: master, remote: master]
TiMOS-L-16.0.R4 boot/hops Nokia 7xxx ? Copyright (c) 2000-2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Sun Sep 30 18:08:18 PDT 2018 by builder in /builds/160/R4/panos/main
TiMOS BOOT LOADER
Extended checks enabled with overhead of 36B
Fair scheduler is now enabled
Time from clock is TUE NOV 17 15:12:04 2020 UTC
Switching serial output to sync mode...   done
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:

brg

Syntax

brg

Context

[Tree] (show>subscr-mgmt>vrgw brg)

Full Context

show subscriber-mgmt vrgw brg

Description

Commands in this context display operational information for connected BRGs and related hosts.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

brg

Syntax

brg

Context

[Tree] (clear>subscr-mgmt>vrgw brg)

Full Context

clear subscriber-mgmt vrgw brg

Description

This command clears BRG data.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

brg

Syntax

brg

Context

[Tree] (tools>perform>subscr-mgmt>vrgw brg)

Full Context

tools perform subscriber-mgmt vrgw brg

Description

This command enables tools for controlling BRGs.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

brg-hosts

Syntax

brg-hosts [mac ieee-address] [ip ip-address]

Context

[Tree] (show>subscr-mgmt>vrgw>brg brg-hosts)

Full Context

show subscriber-mgmt vrgw brg brg-hosts

Description

This command displays operational information for connected BRGs and related hosts.

Parameters

ieee-address: Displays detailed information for each prefix.

ip-address: Displays only the prefixes associated with this subscriber interface.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management BRG host information.

Sample Output

Node# show subscriber-mgmt brg brg-hosts
===============================================================================
Bridged Residential Gateway hosts
===============================================================================
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:19
IP address                   : 21.0.0.20
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 482
Lease start time             : 2016/01/18 17:44:44
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:19
IP address                   : 3ffe:0:0:5::
Service                      : 4 (VPRN)
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1a
IP address                   : 21.0.0.21
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 486
Lease start time             : 2016/01/18 17:44:48
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1a
IP address                   : 3ffe:0:0:5::
Service                      : 4 (VPRN)
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1b
IP address                   : 21.0.0.22
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 490
Lease start time             : 2016/01/18 17:44:52
-------------------------------------------------------------------------------
No. of BRG hosts: 5
===============================================================================

brg-profile

Syntax

brg-profile

brg-profile name

brg-profile name associations

Context

[Tree] (show>subscr-mgmt>vrgw>brg brg-profile)

Full Context

show subscriber-mgmt vrgw brg brg-profile

Description

This command displays BRG profile information.

Parameters

name: Specifies an existing BRG profile name.

associations: Displays information associated with the specified BRG profile name.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

brief

Syntax

brief

Context

[Tree] (show>router>bgp>routes brief)

Full Context

show router bgp routes brief

Description

This command displays summary information about the BGP routes.

brief is a parameter of the show router bgp routes command. Depending on the parameters that are used to issue the command, the output can display a narrower or wider set of routes, including routes belonging to other address families. See the show router bgp routes command description for syntax variants, parameter descriptions and values, and output examples.

Platforms

All

build-packet

Syntax

build-packet

Context

[Tree] (show>test-oam build-packet)

Full Context

show test-oam build-packet

Description

Commands in this context display OAM egress port finder information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

bundles

Syntax

bundles

Context

[Tree] (show>router>l2tp>mlppp bundles)

Full Context

show router l2tp mlppp bundles

Description

This command displays L2TP MLPPP bundle statistics.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s

Output

The following output is an example of L2TP MLPPP bundle statistics information.

Sample Output

The following is an example with one MLPPP bundle (using two links).

*A:Dut-B# show router 100 l2tp mlppp 
*A:Dut-B# show router 100 l2tp mlppp bundles 
===============================================================================
L2TP MLPPP LAC Bundles
===============================================================================
User user_v46_1
Bundle index                : 1
Service                     : 100
Forwarding tunnel ID        : N/A
Local endpoint class        : ipv4-address
Local endpoint address      : 1.1.1.1
Remote endpoint class       : local
Remote endpoint address     : linuxBundle1
Links                       : 1. ID 805988014 (established)
                              2. ID 805991249 (established)
-------------------------------------------------------------------------------
Number of bundles: 1
===============================================================================
*A:Dut-B#

The following is an example with two MLPPP bundles (using two links)

*A:Dut-B# show router 100 l2tp mlppp         
*A:Dut-B# show router 100 l2tp mlppp bundles 
===============================================================================
L2TP MLPPP LAC Bundles
===============================================================================
User user_v46_1
Bundle index                : 1
Service                     : 100
Forwarding tunnel ID        : N/A
Local endpoint class        : ipv4-address
Local endpoint address      : 1.1.1.1
Remote endpoint class       : local
Remote endpoint address     : linuxBundle1
Links                       : 1. ID 518660444 (established)
                              2. ID 518672262 (established)
User user_v46_2
Bundle index                : 2
Service                     : 100
Forwarding tunnel ID        : N/A
Local endpoint class        : ipv4-address
Local endpoint address      : 1.1.1.1
Remote endpoint class       : local
Remote endpoint address     : linuxBundle2
Links                       : 1. ID 518652432 (established)
                              2. ID 518652553 (established)
-------------------------------------------------------------------------------
Number of bundles: 2
===============================================================================
*A:Dut-B#

bypass-tunnel

Syntax

bypass-tunnel [to ip-address] [protected-lsp [ name]] [dynamic | manual | p2mp] [ detail] [lsp-name session-name]

Context

[Tree] (show>router>mpls bypass-tunnel)

Full Context

show router mpls bypass-tunnel

Description

If fast reroute is enabled on an LSP and the facility method is selected, instead of creating a separate LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. Such an LSP tunnel is called a bypass tunnel.

Parameters

ip-address: Specifies the IP address of the egress router.

name: Specifies the name of the LSP protected by the bypass tunnel up to 160 characters. "*” is accepted as a wild card character.

dynamic: Displays dynamically-assigned labels for bypass protection.

manual: Displays manually-assigned labels for bypass protection.

detail: Displays detailed information.

p2mp: Displays P2MP bypass tunnel information.

session-name: Specifies the session name, up to 160 characters, of the LSP used in the path. "*” can be used as a wildcard character.

Platforms

All

Output

The following output is an example of MPLS bypass tunnel information.

MPLS Bypass Tunnel Output Fields describes MPLS bypass tunnel output fields.

Table 9. MPLS Bypass Tunnel Output Fields
Label	Description
To	The IP address of the egress router.
State	The LSP’s administrative state.
Out I/F	Specifies the name of the network IP interface.
Out Label	Specifies the incoming MPLS label on which to match.
Reserved BW (kb/s)	Specifies the amount of bandwidth in Mb/s reserved for the LSP.

Sample Output

*A:Dut-B# show router mpls bypass-tunnel detail

=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To              : 10.20.1.7          State               : Up
Out I/F         : 1/1/4              Out Label           : 131071
Up Time         : 0d 01:17:22        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0
Exclude Node    : 10.20.1.4          Inter-Area          : True
Computed Hops   :
    10.10.8.2(S)                     Egress Admin Groups : None
-> 10.10.8.6(SA)                    Egress Admin Groups : None
-> 10.20.1.7(L)                     Egress Admin Groups : None
Actual Hops     :
    10.10.8.2(10.20.1.2)             Record Label        : N/A
-> 10.10.8.6(10.20.1.6)             Record Label        : 131071
-> 10.20.1.7(10.20.1.7)             Record Label        : 131068
-> 10.10.22.7                       Record Label        : 131068

=======================================================================


*A:Dut-A>config>router>mpls>lsp$ /show router mpls bypass-tunnel detail 

=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.2
-----------------------------------------------------------------------
To              : 10.20.1.4          State               : Up
Out I/F         : 1/1/2              Out Label           : 131070
Up Time         : 0d 00:00:18        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic            
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0                  
Exclude Node    : None               Inter-Area          : False
Computed Hops   :                    
    10.20.1.1, If Index : 3(S)       Egress Admin Groups : None
-> 10.20.1.3, If Index : 2(S)       Egress Admin Groups : None
-> 10.20.1.4, If Index : 5(S)       Egress Admin Groups : None
Actual Hops     :                    
    10.20.1.1, If Index : 3          Record Label        : N/A
-> 10.20.1.3, If Index : 2          Record Label        : 131070
-> 10.20.1.4, If Index : 5          Record Label        : 131070

=======================================================================

B:Dut-B>config>router>mpls>lsp# show router mpls bypass-tunnel detail

=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To              : 10.10.10.6         State               : Up
Out I/F         : lag-1              Out Label           : 131071
Up Time         : 0d 00:00:06        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0
Exclude Node    : None
Actual Hops     :
    10.10.12.2(S)                     Egress Admin Groups:
                                      lime
                                      olive
                                      blue
                                      black
                                      acqua
-> 10.10.12.3(S)                     Egress Admin Groups:
                                      olive
                                      Unknown Group 9
                                      Unknown Group 11
                                      black
                                      Unknown Group 16
                                      Unknown Group 18
-> 10.10.5.5(S)                      Egress Admin Groups:
                                      purple
                                      Unknown Group 7
                                      Unknown Group 11
                                      orange
                                      acqua
                                      Unknown Group 16
                                      Unknown Group 19
                                      Unknown Group 21
                                      Unknown Group 22
                                      Unknown Group 26
                                      khaki
-> 10.10.10.6(S)                     Egress Admin Groups: None

=======================================================================:


*A:SRU4>show>router>mpls# bypass-tunnel
===============================================================================
MPLS Bypass Tunnels
===============================================================================
Legend :  m - Manual      d - Dynamic      p - P2mp
===============================================================================
To              State  Out I/F        Out Label     Reserved   Protected  Type
                                                    BW (Kbps)  LSP Count
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:SRU4>show>router>mpls#


*A:Dut-B# show router mpls bypass-tunnel detail 
==============================================================================
MPLS Bypass Tunnels (Detail)
==============================================================================
bypass-link10.10.104.4
------------------------------------------------------------------------------
To              : 10.10.101.4        State               : Up                  
Out I/F         : 1/1/2:1            Out Label           : 129994              
Up Time         : 0d 00:02:33        Active Time         : n/a                 
Reserved BW     : 0 Kbps             Protected LSP Count : 1                   
Type            : Dynamic                                                      
SetupPriority   : 7                  Hold Priority       : 0                   
Class Type      : 0                                                            
Actual Hops     :                                                              
    10.10.101.2     -> 10.10.101.4 
==============================================================================
*A:Dut-B#


*A:Dut-B# show router mpls bypass-tunnel detail 
==============================================================================
MPLS Bypass Tunnels (Detail)
------------------------------------------------------------------------------
bypass-link10.10.104.4
------------------------------------------------------------------------------
To              : 10.10.101.4        State               : Up                  
Out I/F         : 1/1/2:1            Out Label           : 129994              
Up Time         : 0d 00:02:33        Active Time         : n/a                 
Reserved BW     : 0 Kbps             Protected LSP Count : 1                   
Type            : Dynamic                                                      
SetupPriority   : 7                  Hold Priority       : 0                   
Class Type      : 0                                                            
Actual Hops     :                                                              
    10.10.101.2     -> 10.10.101.4    
==============================================================================
*A:Dut-B#

bypass-tunnel

Syntax

bypass-tunnel [lsp-name] plr

Context

[Tree] (tools>dump>router>mpls bypass-tunnel)

Full Context

tools dump router mpls bypass-tunnel

Description

This command displays information about the MPLS bypass tunnel.

Parameters

lsp-name: Specifies the LSP name up to 64 characters in length.

plr: Specifies the point of local repair (PLR).

Platforms

All

Output

The following output is an example of MPLS Bypass Tunnels PLR fields.

Sample Output

tools dump router mpls bypass-tunnel plr 
========================================================================
MPLS Bypass Tunnels
========================================================================
Legend :  m - Manual      d - Dynamic      p - P2mp
========================================================================
To              State  Out I/F        Out Label     Reserved   Protected  Type
                                                    BW (Kbps)  LSP Count
------------------------------------------------------------------------
10.10.12.1      Up     1/1/4          124181        0          369        d

To              : 10.10.12.1         State               : Up
Out I/F         : 1/1/4              Out Label           : 124181
Up Time         : 0d 19:24:13        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 369
Type            : Dynamic
SetupPriority   : 7                  Hold Priority       : 0
Class Type      : 0                  Tunnel Id : 63697
Actual Hops     :
    10.10.12.2(S)      -> 10.10.12.1(S)
       
         Plr List: (Last PlrIdx 2)
         --------
                 PLR List Index = 1
                 PLR current State = PLRS_CONNECTED
                 NextNodeSysId = 10.8.8.8
                  AvoidNodeId   = 10.2.2.2
                 NodeProtect   = 2 (Node Protect)
                 LSP Count     = 197
                 PLR List Index = 2
                 PLR current State = PLRS_BackupInUse
                 NextNodeSysId = 10.8.8.8
                 AvoidNodeId   = 10.2.2.2
                 NodeProtect   = 2 (Node Protect)
                 LSP Count     = 203