o Commands
oam
oam
Syntax
oam [interval seconds] [ repeat repeat] [absolute| rate]
Context
[Tree] (monitor>port>atm>pvc oam)
Full Context
monitor port atm pvc oam
Description
This command monitors ATM PVC OAM statistics.
Parameters
- seconds
Configures the interval for each display in seconds.
- repeat
Configures how many times the command is repeated.
- absolute
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
Displays rate-per-second for each statistic instead of the delta.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7950 XRS
oam
Syntax
oam [interval seconds] [ repeat repeat] [absolute| rate]
Context
[Tree] (monitor>port>atm>pvp oam)
Full Context
monitor port atm pvp oam
Description
This command monitors ATM PVP OAM statistics.
Parameters
- seconds
Configures the interval for each display in seconds.
- repeat
Configures how many times the command is repeated.
- absolute
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
Displays rate-per-second for each statistic instead of the delta.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7950 XRS
oam-config-summary
oam-config-summary
Syntax
oam-config-summary
Context
[Tree] (show>test-oam oam-config-summary)
Full Context
show test-oam oam-config-summary
Description
This command displays the OAM configuration resources in use, as well as the percentage of available and per-system limits for the platform. The lines produced by the show command output vary by platform and may account for resource allocation in different ways. The resource accounting is tied to different resource pools across different platforms.
Platforms
All
Output
The following output is an example of OAM configuration information.
This example for is platforms that have separate resource pools for OAM-PM (tests and packet per second). OAM-PM resources are tracked separately from the background OAM and SAA tests and transmit capacity. The limits are platform-specific.
Sample Outputshow test-oam oam-config-summary
-------------------------------------------------------------------------------
OAM-Managed Test Capacity (tests)
-------------------------------------------------------------------------------
Resource InUse %InUse Limit
-------------------------------------------------------------------------------
Background ICMP Bridged Residential Gateway tests 0 0.0 50000
Background ICMP Interface Control tests 0 0.0 4000
Background OAM and SAA tests 0 0.0 10000
Background Static Host CPE Check tests 0 0.0 5000
Background Static Route CPE Check tests 0 0.0 10000
LSP Self Ping tests 0 0.0 1250
OAM-PM tests 0 0.0 24000
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
OAM-Managed Transmit Capacity (pps)
-------------------------------------------------------------------------------
Resource InUse %InUse Limit
-------------------------------------------------------------------------------
Shared Resource Pool Maximum 0 0.0 24000
Background Shared Pool Maximum 0 0.0 10000
Background OAM and SAA-continuous Tx capacity 0 0.0 6000
Background Static Route CPE Check Tx capacity 0 0.0 10000
OAM-PM Tx capacity 0 0.0 18000
Dedicated Resources
LSP Self Ping Tx capacity 0 0.0 125
-------------------------------------------------------------------------------
The following is a sample output that can displayed for those platforms that have a common resource pool (tests and packet per second) for background OAM, OAM-PM and SAA.
show test-oam oam-config-summary
-------------------------------------------------------------------------------
OAM-Managed Test Capacity (tests)
-------------------------------------------------------------------------------
Resource InUse %InUse Limit
-------------------------------------------------------------------------------
Background OAM, OAM-PM, and SAA tests 0 0.0
Background ICMP Interface Control tests 0 0.0
LSP Self Ping tests 0 0.0
-------------------------------------------------------------------------------
OAM-Managed Transmit Capacity (pps)
-------------------------------------------------------------------------------
Resource InUse %InUse Limit
-------------------------------------------------------------------------------
Background OAM, OAM-PM, and SAA-continuous Tx capacity 0 0.2
LSP Self Ping Tx capacity 0 0.0
-------------------------------------------------------------------------------
The following table describes the test OAM configuration limit fields.
|
Label |
Description |
|---|---|
|
InUse |
Specifies the number of resources in use |
|
%InUse |
Specifies the percentage of resources in use |
|
Limit |
Specifies the total number of available resources |
oam-perf
oam-perf
Syntax
oam-perf [detail]
Context
[Tree] (show>test-oam oam-perf)
Full Context
show test-oam oam-perf
Description
This command displays OAM performance information, including packet per second rates and the cumulative packets receive and transmitted. Statistics are cleared using the clear>test-oam>oam-perf command to properly interpret current data rate. The counts are displayed since the last clear and may be skewed because of irrelevant historical data.
Parameters
- detail
Displays detailed information.
Platforms
All
Output
The following output is an example of OAM performance information.
Sample Outputshow test-oam oam-perf
Current Time : 12/20/2018 20:22:49
Last Clear : 12/20/2018 20:21:08
Period Duration : 0d 00:01:41 (101.43 seconds)
Local Tests (Tx) : 251 packets, 2.47 packets/second
Remote Tests (Rx) : 0 packets, 0.00 packets/second
show test-oam oam-perf detail
Current Time : 12/20/2018 20:22:53
Last Clear : 12/20/2018 20:21:08
Period Duration : 0d 00:01:45 (105.29 seconds)
==============================================================================
OAM packets Tx by locally initiated tests and Rx from remotely initiated tests
==============================================================================
--- Local Tests ---- -- Remote Tests ----
OAM Type TxPackets Rate(pps) RxPackets Rate(pps)
------------------------------------------------------------------------------
Eth-CFM 0 0.00 0 0.00
ICMP 0 0.00 0 0.00
LSP 0 0.00 0 0.00
MAC CPE MFIB 0 0.00 0 0.00
MPLS DM 156 1.48 0 0.00
Multicast 0 0.00 0 0.00
SDP SVC 0 0.00 0 0.00
Twamp-Light 105 1.00 0 0.00
VCCV 0 0.00 0 0.00
VPRN 0 0.00 0 0.00
VXLAN 0 0.00 0 0.00
other 0 0.00 0 0.00
Total 261 2.48 0 0.00
==============================================================================
oam-perf
Syntax
oam-perf
Context
[Tree] (clear>test-oam oam-perf)
Full Context
clear test-oam oam-perf
Description
This command clears OAM performance statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
oam-perf
Syntax
oam-perf [interval seconds] [ repeat repeat] [{absolute | rate}]
Context
[Tree] (monitor>test-oam oam-perf)
Full Context
monitor test-oam oam-perf
Description
This command monitors the OAM performance statistics.
Parameters
- seconds
Specifies the time interval, in seconds.
- repeat
Specifies the number of times the command is repeated.
- absolute
Specifies that the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.
- rate
Specifies that the rate-per-second is displayed.
Platforms
All
oam-pm
oam-pm
Syntax
oam-pm
Context
[Tree] (show oam-pm)
Full Context
show oam-pm
Description
Commands in this context show Operations, Administration, and Maintenance Performance Management information.
Platforms
All
oam-pm
Syntax
oam-pm session session-name {dm | dmm | lmm | slm | twamp-light}
Context
[Tree] (clear oam-pm)
Full Context
clear oam-pm
Description
This command clears OAM performance statistics reported by the show>test-oam >oam-perf [ detail].
Parameters
- session-name
Identifies the session name, up to 32 characters, that the test is associated with.
- dm
Specifies the MPLS delay measurement test that is affected by the command.
- dmm
Specifies the DMM test that is affected by the command.
- lmm
Specifies the LMM test that is affected by the command.
- slm
Specifies the SLM test that is affected by the command.
- twamp-light
Specifies the TWAMP-light test that is affected by the command.
Platforms
All
oam-pm
Syntax
oam-pm
Context
[Tree] (monitor oam-pm)
Full Context
monitor oam-pm
Description
Commands in this context monitor Operations, Administration, and Maintenance Performance Management information.
Platforms
All
oam-template
oam-template
Syntax
oam-template
Context
[Tree] (show>router>mpls>mpls-tp oam-template)
Full Context
show router mpls mpls-tp oam-template
Description
This command displays MPLS-TP OAM template information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of MPLS OAM template detail information.
Sample Output*A:mlstp-dutA# show router mpls mpls-tp oam-template
===============================================================================
MPLS-TP OAM Templates
===============================================================================
Template Name : privatebed-oam-template Router ID : 1
BFD Template : privatebed-bfd-template Hold-Down Time: 0 centiseconds
Hold-Up Time : 20 deciseconds
===============================================================================
ocsp-cache
ocsp-cache
Syntax
ocsp-cache [entry-id]
Context
[Tree] (show>certificate ocsp-cache)
Full Context
show certificate ocsp-cache
Description
This command displays the current cached OCSP results. The output includes the following information:
Certificate issuer
Certificate serial number
OCSP result
Cache entry expire time
Parameters
- entry-id
Specifies the local cache entry identifier of the certificate that was validated by the OCSP responder.
Platforms
All
of-switch
of-switch
Syntax
of-switch
of-switch ofs-name controller ip-address:port detail
of-switch ofs-name status controller [ip-address:port]
of-switch ofs-name controller
of-switch ofs-name flowtable
of-switch ofs-name status
of-switch ofs-name port
Context
[Tree] (show>open-flow of-switch)
Full Context
show open-flow of-switch
Description
This command displays information related to H-OFS configuration and operations as per the parameters specified.
If no parameter is specified, this command displays a summary for H-OFS instances configured.
Parameters
- ofs-name
Specifies the name of the configured H-OFS instance, up to 32 characters.
- ip-address:port
Displays information on the controller for the specified H-OFS instance.
- detail
Displays detailed information.
- flowtable
Displays information about flowtables for the specified H-OFS instance.
- status
Displays status information for the specified H-OFS switch or its controller.
- port
Displays information about the logical OpenFlow ports registered with the specified H-OFS instance.
Platforms
All
Output
Sample Output*A:Dut-A# show open-flow of-switch "s1" status
===============================================================================
Open Flow Switch Information
===============================================================================
Switch Name : s1
Data Path ID : 0 Admin Status : Up
Echo Interval : 10 seconds Echo Multiple : 3
Logical Port Type : all
Buffer Size : 256 Num. of Tables : 1
Description : test-sw1
Capabilities Supp. : flow-stats table-stats port-stats
===============================================================================
*A:Dut-A# show open-flow of-switch "s1" controller
===============================================================================
Open Flow Controller Summary
===============================================================================
IP Address Port
-------------------------------------------------------------------------------
10.20.1.2 6633
10.20.1.3 6633
-------------------------------------------------------------------------------
Number of Controllers : 2
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-A# show open-flow of-switch "s1" controller 10.20.1.2:6633 detail
===============================================================================
Open Flow Controller Information
===============================================================================
IP Address : 10.20.1.2 Port : 6633
Role : equal Generation ID : 0
-------------------------------------------------------------------------------
Open Flow Channel Information
-------------------------------------------------------------------------------
Channel ID : 1 Version : 4
Connection Type : primary Operational Status: Up
Operational Flags : socketStateEstablished helloReceived helloTransmitted
handshake
Async Fltr Packet In
(Master or Equal) : tableMiss applyAction
(Slave) : (Not Specified)
Async Fltr Port Status
(Master or Equal) : portAdd portDelete portModify
(Slave) : portAdd portDelete portModify
Async Fltr Flow Rem
(Master or Equal) : idleTimeOut hardTimeOut flowModDelete groupDelete
(Slave) : (Not Specified)
Echo Time Expiry : 0d 00:00:10 Hold Time Expiry : 0d 00:00:30
Conn. Uptime : 0d 00:00:00 Conn. Retry : 0d 00:00:00
-------------------------------------------------------------------------------
Open Flow Channel Stats - Channel ID(1)
-------------------------------------------------------------------------------
Packet Type Transmitted Packets Received Packets Error Packets
-------------------------------------------------------------------------------
Hello 1 1 0
Error 0 0 0
Echo Request 0 70 0
Echo Reply 70 0 0
Experimenter 0 0 0
Feat. Request 0 1 0
Feat. Reply 1 0 0
Get Cfg Request 0 1 0
Get Cfg Reply 1 0 0
Set Config 0 1 0
Packet In 0 0 0
Flow Removed 0 0 0
Port Status 0 0 6
Packet Out 0 0 0
Flow Modify 0 0 0
Group Modify 0 0 0
Port Modify 0 0 0
Table Modify 0 0 0
Multipart Req 0 0 0
Multipart Reply 0 0 0
Barrier Request 0 0 0
Barrier Reply 0 0 0
Get Q Cfg Req 0 0 0
Get Q Cfg Reply 0 0 0
Role Request 0 0 0
Role Reply 0 0 0
Get Async Req 0 0 0
Get Async Reply 0 0 0
Set Async 0 0 0
Meter Modify 0 0 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-A# show open-flow of-switch "s1" flowtable
===============================================================================
Flow Table Information
===============================================================================
Flow Table ID : 0 Max-Size : 1000
No-Match Action : fall-through Curr Num. of Entries : 1
Max. Num. of Entries : 54
===============================================================================
*A:Dut-A# show open-flow of-switch "s1" port
===============================================================================
Open Flow Port Stats
===============================================================================
Port ID Port Name Transmitted Packets Transmitted Bytes
-------------------------------------------------------------------------------
1073741825 to_B 0 0
1073741826 to_C 0 0
1073741827 to_D 0 0
1073741828 to_E 0 0
1073741829 to_F 0 0
1073742824 1 0 0
===============================================================================
*A:Dut-C# show open-flow of-switch "ofs" controller 1.3.8.8:6633 detail
===============================================================================
Open Flow Controller Information
===============================================================================
IP Address : 1.3.8.8 Port : 6633
Role : equal
Generation ID : 0
-------------------------------------------------------------------------------
Open Flow Channel Information - Channel ID(2)
-------------------------------------------------------------------------------
Channel ID : 2 Version : 4
Connection Type : primary Operational Status: Up
Auxiliary ID : 0
Source Address : 10.20.1.3 Source Port : 49722
Operational Flags : socket-state-established hello-received hello-transmitted
handshake
Async Fltr Packet In
(Master or Equal): table-miss apply-action
(Slave) : (Not Specified)
Async Fltr Port Status
(Master or Equal): port-add port-delete port-modify
(Slave) : port-add port-delete port-modify
Async Fltr Flow Rem
(Master or Equal): idle-time-out hard-time-out flow-mod-delete group-delete
(Slave) : (Not Specified)
Echo Time Expiry : 0d 00:00:04 Hold Time Expiry : 0d 00:00:24
Conn. Uptime : 0d 01:27:53 Conn. Retry : 0d 00:00:00
-------------------------------------------------------------------------------
Open Flow Channel Stats - Channel ID(2)
-------------------------------------------------------------------------------
Packet Type Transmitted Packets Received Packets Error Packets
-------------------------------------------------------------------------------
Hello 0 0 0
Error 0 0 0
Echo Request 348 174 0
Echo Reply 174 348 0
Experimenter 0 0 0
Feat. Request 0 0 0
Feat. Reply 0 0 0
Get Cfg Request 0 0 0
Get Cfg Reply 0 0 0
Set Config 0 0 0
Packet In 0 0 0
Flow Removed 0 0 0
Port Status 0 0 0
Packet Out 0 0 0
Flow Modify 0 0 0
Group Modify 0 0 0
Port Modify 0 0 0
Table Modify 0 0 0
Multipart Req 0 0 0
Multipart Reply 0 0 0
Barrier Request 0 0 0
Barrier Reply 0 0 0
Get Q Cfg Req 0 0 0
Get Q Cfg Reply 0 0 0
Role Request 0 0 0
Role Reply 0 0 0
Get Async Req 0 0 0
Get Async Reply 0 0 0
Set Async 0 0 0
Meter Modify 0 0 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Open Flow Channel Information - Channel ID(3)
-------------------------------------------------------------------------------
Channel ID : 3 Version : 4
Connection Type : auxiliary Operational Status: Up
Auxiliary ID : 1
Source Address : 10.20.1.3 Source Port : 49748
Operational Flags : socket-state-established hello-received hello-transmitted
handshake
Async Fltr Packet In
(Master or Equal): table-miss apply-action
(Slave) : (Not Specified)
Async Fltr Port Status
(Master or Equal): port-add port-delete port-modify
(Slave) : port-add port-delete port-modify
Async Fltr Flow Rem
(Master or Equal): idle-time-out hard-time-out flow-mod-delete group-delete
(Slave) : (Not Specified)
Echo Time Expiry : 0d 00:00:02 Hold Time Expiry : 0d 00:00:22
Conn. Uptime : 0d 01:27:47 Conn. Retry : 0d 00:00:00
-------------------------------------------------------------------------------
Open Flow Channel Stats - Channel ID(3)
-------------------------------------------------------------------------------
Packet Type Transmitted Packets Received Packets Error Packets
-------------------------------------------------------------------------------
Hello 0 0 0
Error 0 0 0
Echo Request 348 174 0
Echo Reply 174 348 0
Experimenter 0 0 0
Feat. Request 0 0 0
Feat. Reply 0 0 0
Get Cfg Request 0 0 0
Get Cfg Reply 0 0 0
Set Config 0 0 0
Packet In 0 0 0
Flow Removed 0 0 0
Port Status 0 0 0
Packet Out 0 0 0
Flow Modify 0 0 0
Group Modify 0 0 0
Port Modify 0 0 0
Table Modify 0 0 0
Multipart Req 0 0 0
Multipart Reply 0 0 0
Barrier Request 0 0 0
Barrier Reply 0 0 0
Get Q Cfg Req 0 0 0
Get Q Cfg Reply 0 0 0
Role Request 0 0 0
Role Reply 0 0 0
Get Async Req 0 0 0
Get Async Reply 0 0 0
Set Async 0 0 0
Meter Modify 0 0 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Open Flow Channel Information - Channel ID(4)
-------------------------------------------------------------------------------
Channel ID : 4 Version : 4
Connection Type : auxiliary Operational Status: Up
Auxiliary ID : 2
Source Address : 10.20.1.3 Source Port : 49749
Operational Flags : socket-state-established hello-received hello-transmitted
handshake
Async Fltr Packet In
(Master or Equal): table-miss apply-action
(Slave) : (Not Specified)
Async Fltr Port Status
(Master or Equal): port-add port-delete port-modify
(Slave) : port-add port-delete port-modify
Async Fltr Flow Rem
(Master or Equal): idle-time-out hard-time-out flow-mod-delete group-delete
(Slave) : (Not Specified)
Echo Time Expiry : 0d 00:00:01 Hold Time Expiry : 0d 00:00:21
Conn. Uptime : 0d 01:27:49 Conn. Retry : 0d 00:00:00
-------------------------------------------------------------------------------
Open Flow Channel Stats - Channel ID(4)
-------------------------------------------------------------------------------
Packet Type Transmitted Packets Received Packets Error Packets
-------------------------------------------------------------------------------
Hello 0 0 0
Error 0 0 0
Echo Request 348 174 0
Echo Reply 174 348 0
Experimenter 0 0 0
Feat. Request 0 0 0
Feat. Reply 0 0 0
Get Cfg Request 0 0 0
Get Cfg Reply 0 0 0
Set Config 0 0 0
Packet In 104420 0 0
Flow Removed 0 0 0
Port Status 0 0 0
Packet Out 0 0 0
Flow Modify 0 0 0
Group Modify 0 0 0
Port Modify 0 0 0
Table Modify 0 0 0
Multipart Req 0 0 0
Multipart Reply 0 0 0
Barrier Request 0 0 0
Barrier Reply 0 0 0
Get Q Cfg Req 0 0 0
Get Q Cfg Reply 0 0 0
Role Request 0 0 0
Role Reply 0 0 0
Get Async Req 0 0 0
Get Async Reply 0 0 0
Set Async 0 0 0
Meter Modify 0 0 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C#
of-switch
Syntax
of-switch ofs-name [flowtable of-table-id] [ controller ip-address:port] [{grt | system | service-id service-id}] [cookie hex-string] [ priority priority]
of-switch ofs-name [flowtable of-table-id] [ controller ip-address:port] service-id service-id sap sap-id [cookie hex-string] [ priority priority]
of-switch ofs-name [flowtable of-table-id] [ controller ip-address:port] summary
Context
[Tree] (tools>dump>open-flow of-switch)
Full Context
tools dump open-flow of-switch
Description
This command can be used to dump information for a given OpenFlow switch or its flowtable. Priority and cookie filters are provided no focus on part of a flow table.
Usage examples:
a. tools>dump>open-flow>of-switch ofs-test — This command displays detailed flow information for a given OpenFlow switch. If the switch has switch-defined-cookie enabled, the flows with all cookie-types are displayed.
b. tools>dump>open-flow>of-switch ofs summary — This command displays a summary of each cookie context and the number of flows in it for the switch that has switch-defined-cookie enabled. If switch-defined-cookie is disabled, then the total number of entries is displayed (single context).
c. Options like grt, system, service-id, sap-id, cookie, and priority can be used to limit display entries to the specified options.
Parameters
- ofs-name
Specifies the name of the OFS instance, up to 32 characters.
- of-table-id
Specifies the identifier for the OpenFlow table.
- ip-address:port
Specifies the IP address and TCP port for the OpenFlow channel to the controller.
- grt
Flowtable rules applicable to GRT instance (IES, Router).
- system
Flowtable rules applicable to system filters.
- service-id
Specifies the identifier for the service.
- hex-string
Specifies the identifier for the OpenFlow cookies.
- priority
Specifies the priority for the OpenFlow switch.
- sap-id
Specifies the identifier for the Ethernet SAP.
- summary
Keyword to summarize output.
Platforms
All
Output
Sample Output===============================================================================
Switch: ofs
===============================================================================
Table : 0 Flow Pri : 0
Cookie : 0x0000000000000000 CookieType: grt
Controller: :::0
Filter Hnd: 0xC30000010000FFFF
Filter : _tmnx_ofs_ofs:1 entry 65535
In Port : *
VID : * Outer VID : *
EthType : *
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
IPv6ExtHdr: (Not Specified)
Action : Fall-through
Flow Flags: IPv4/6 [!E] [RO] [DEF]
Up Time : 0d 00:03:51 Add TS : 680828
Mod TS : 0 Stats TS : 703820
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 16
Cookie : 0x0000000000000000 CookieType: grt
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000010000FFEF
Filter : _tmnx_ofs_ofs:1 entry 65519
In Port : *
VID : * Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : 22.22.22.1/32
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Svc 99
Flow Flags: IPv4
Up Time : 0d 00:01:15 Add TS : 696581
Mod TS : 0 Stats TS : 703820
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 17
Cookie : 0xC000006300000000 CookieType: service 99
Controller: 1.3.8.8:6633
Filter Hnd: 0x8300000D0000FFEE
Filter : _tmnx_ofs_ofs:13 entry 65518
In Port : *
VID : * Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : 22.22.22.2/32
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On GRT
Flow Flags: IPv4
Up Time : 0d 00:01:10 Add TS : 697095
Mod TS : 0 Stats TS : 703820
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 4
Cookie : 0xC00007E200000000 CookieType: service 2018
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000050000FFFB
Filter : _tmnx_ofs_ofs:5 entry 65531
SAP : 1/1/3:0
In Port : 0x2218000
VID : 0x1000 Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap 1/1/3:0
Flow Flags: IPv4
Up Time : 0d 00:02:13 Add TS : 690788
Mod TS : 0 Stats TS : 703820
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 3
Cookie : 0xC00007E200000000 CookieType: service 2018
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000040000FFFC
Filter : _tmnx_ofs_ofs:4 entry 65532
SAP : 1/1/3:4094
In Port : 0x2218000
VID : 0x1ffe Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap 1/1/3:4094
Flow Flags: IPv4
Up Time : 0d 00:02:18 Add TS : 690274
Mod TS : 0 Stats TS : 703820
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 5
Cookie : 0xC00007E200000000 CookieType: service 2018
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000060000FFFA
Filter : _tmnx_ofs_ofs:6 entry 65530
SAP : lag-800:4094
In Port : 0x50000320
VID : 0x1ffe Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap lag-800:4094
Flow Flags: IPv4
Up Time : 0d 00:02:09 Add TS : 691201
Mod TS : 0 Stats TS : 703821
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 8
Cookie : 0xC00007E300000000 CookieType: service 2019
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000090000FFF7
Filter : _tmnx_ofs_ofs:9 entry 65527
SAP : 2/1/3:1.0
In Port : 0x4218000
VID : 0x1000 Outer VID : 0x1001
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap 2/1/3:1.0
Flow Flags: IPv4
Up Time : 0d 00:01:56 Add TS : 692448
Mod TS : 0 Stats TS : 703821
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 7
Cookie : 0xC00007E300000000 CookieType: service 2019
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000080000FFF8
Filter : _tmnx_ofs_ofs:8 entry 65528
SAP : 2/1/3:4094.4094
In Port : 0x4218000
VID : 0x1ffe Outer VID : 0x1ffe
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap 2/1/3:4094.4094
Flow Flags: IPv4
Up Time : 0d 00:02:01 Add TS : 692032
Mod TS : 0 Stats TS : 703821
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 10
Cookie : 0xC00007E300000000 CookieType: service 2019
Controller: 1.3.8.8:6633
Filter Hnd: 0x8300000B0000FFF5
Filter : _tmnx_ofs_ofs:11 entry 65525
SAP : lag-799:4094.4094
In Port : 0x5000031f
VID : 0x1ffe Outer VID : 0x1ffe
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap lag-799:4094.4094
Flow Flags: IPv4
Up Time : 0d 00:01:46 Add TS : 693483
Mod TS : 0 Stats TS : 703821
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 1
Cookie : 0xC00007E400000000 CookieType: service 2020
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000020000FFFE
Filter : _tmnx_ofs_ofs:2 entry 65534
SAP : 2/1/4
In Port : 0x4220000
VID : 0x0 Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap 2/1/4
Flow Flags: IPv4
Up Time : 0d 00:02:27 Add TS : 689443
Mod TS : 0 Stats TS : 703821
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 12
Cookie : 0xC00007E400000000 CookieType: service 2020
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000020000FFF3
Filter : _tmnx_ofs_ofs:2 entry 65523
SAP : 2/1/4
In Port : 0x4220000
VID : 0x0 Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward Sdp 12:4294967295
Flow Flags: IPv4
Up Time : 0d 00:01:36 Add TS : 694524
Mod TS : 0 Stats TS : 703821
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 13
Cookie : 0xC00007E400000000 CookieType: service 2020
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000020000FFF2
Filter : _tmnx_ofs_ofs:2 entry 65522
SAP : 2/1/4
In Port : 0x4220000
VID : 0x0 Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Nhop(Indirect)
Nhop: 200.180.200.180
Flow Flags: IPv4
Up Time : 0d 00:01:31 Add TS : 695037
Mod TS : 0 Stats TS : 703821
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 15
Cookie : 0xC00007E400000000 CookieType: service 2020
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000020000FFF0
Filter : _tmnx_ofs_ofs:2 entry 65520
SAP : 2/1/4
In Port : 0x4220000
VID : 0x0 Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward LspId 1
Lsp lsp1
Flow Flags: IPv4
Up Time : 0d 00:01:21 Add TS : 696067
Mod TS : 0 Stats TS : 703822
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 14
Cookie : 0xC00007E400000000 CookieType: service 2020
Controller: 1.3.8.8:6633
Filter Hnd: 0x430000020000FFF1
Filter : _tmnx_ofs_ofs:2 entry 65521
SAP : 2/1/4
In Port : 0x4220000
VID : 0x0 Outer VID : *
EthType : 0x86dd
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
IPv6ExtHdr: (Not Specified)
Action : Forward On Nhop(Indirect)
Nhop: 3ffe:1111:1111:2222:2222:3333:3333:4444
Flow Flags: IPv6
Up Time : 0d 00:01:26 Add TS : 695551
Mod TS : 0 Stats TS : 703822
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 2
Cookie : 0xC00007E400000000 CookieType: service 2020
Controller: 1.3.8.8:6633
Filter Hnd: 0x830000030000FFFD
Filter : _tmnx_ofs_ofs:3 entry 65533
SAP : lag-798
In Port : 0x5000031e
VID : 0x0 Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : *
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Sap
Sap lag-798
Flow Flags: IPv4
Up Time : 0d 00:02:23 Add TS : 689857
Mod TS : 0 Stats TS : 703822
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 19
Cookie : 0x8000000000000000 CookieType: system
Controller: 1.3.8.8:6633
Filter Hnd: 0x4300000E0000FFEC
Filter : _tmnx_ofs_ofs:14 entry 65516
In Port : *
VID : * Outer VID : *
EthType : 0x86dd
Src IP : *
Dst IP : 3ffe::1616:1601/128
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
IPv6ExtHdr: (Not Specified)
Action : Forward On Nhop(Indirect)
Nhop: 3ffe:1111:1111:2222:2222:3333:3333:4444
Flow Flags: IPv6
Up Time : 0d 00:01:01 Add TS : 698121
Mod TS : 0 Stats TS : 703822
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Table : 0 Flow Pri : 18
Cookie : 0x8000000000000000 CookieType: system
Controller: 1.3.8.8:6633
Filter Hnd: 0x8300000E0000FFED
Filter : _tmnx_ofs_ofs:14 entry 65517
In Port : *
VID : * Outer VID : *
EthType : 0x0800
Src IP : *
Dst IP : 22.22.22.1/32
IP Proto : * DSCP : *
Src Port : * Dst Port : *
ICMP Type : * ICMP Code : *
Label : *
Action : Forward On Nhop(Indirect)
Nhop: 200.180.200.180
Flow Flags: IPv4
Up Time : 0d 00:01:06 Add TS : 697608
Mod TS : 0 Stats TS : 703822
#Packets : 0 #Bytes : 0
-------------------------------------------------------------------------------
Number of flows: 17
===============================================================================
*A:Dut-C#
omcr
omcr
Syntax
omcr
Context
[Tree] (show>redundancy>multi-chassis omcr)
Full Context
show redundancy multi-chassis omcr
Description
Commands in this context display OMCR information for subscribers.
Platforms
7750 SR
on-change-paths
on-change-paths
Syntax
on-change-paths
on-change-paths {open-config | nokia}
Context
[Tree] (tools>dump>system>telemetry on-change-paths)
Full Context
tools dump system telemetry on-change-paths
Description
This command lists all paths supporting on-change notifications. The keywords open-config and nokia indicate which model should be used as a reference for the output.
Parameters
- open-config
Indicates that the open-config model will be used as the output reference.
- nokia
Indicates that the Nokia model will be used as the output reference.
Platforms
All
Output
Sample OutputA:node-6# tools dump system telemetry on-change-paths nokia
===============================================================================
Nokia on-change state paths
===============================================================================
/state/log/log-id/oper-state
/state/port/ethernet/lldp/dest-mac/remote-system/chassis-id
/state/port/ethernet/lldp/dest-mac/remote-system/chassis-id-subtype
/state/port/ethernet/lldp/dest-mac/remote-system/remote-port-id
/state/port/ethernet/lldp/dest-mac/remote-system/remote-port-id-subtype
/state/port/ethernet/lldp/dest-mac/remote-system/port-description
/state/port/ethernet/lldp/dest-mac/remote-system/system-enabled-capabilities
/state/port/ethernet/lldp/dest-mac/remote-system/system-supported-capabilities
/state/port/ethernet/lldp/dest-mac/remote-system/system-description
/state/port/ethernet/lldp/dest-mac/remote-system/system-name
/state/port/ethernet/lldp/dest-mac/remote-system/mgmt-address/interface-subtype
/state/port/ethernet/lldp/dest-mac/remote-system/mgmt-address/interface-id
/state/port/ethernet/lldp/dest-mac/remote-system/mgmt-address/object-identifier
/state/router/interface/if-oper-status
/state/router/isis/interface/level/oper-metric/ipv4-unicast
/state/router/isis/interface/level/oper-metric/ipv6-unicast
/state/router/isis/interface/level/oper-metric/ipv4-multicast
/state/router/isis/interface/level/oper-metric/ipv6-multicast
/state/router/mpls/lsp/oper-state
/state/router/mpls/lsp/primary/mbb/last-mbb/type
/state/router/mpls/lsp/primary/mbb/last-mbb/end-time
/state/router/mpls/lsp/primary/mbb/last-mbb/metric
/state/router/mpls/lsp/primary/mbb/last-mbb/state
/state/router/mpls/lsp/primary/mbb/last-mbb/signaled-bw
/state/router/mpls/lsp/secondary/mbb/last-mbb/type
/state/router/mpls/lsp/secondary/mbb/last-mbb/end-time
/state/router/mpls/lsp/secondary/mbb/last-mbb/metric
/state/router/mpls/lsp/secondary/mbb/last-mbb/state
/state/router/mpls/lsp/secondary/mbb/last-mbb/signaled-bw
/state/service/ies/interface/if-oper-status
/state/service/vprn/interface/if-oper-status
/state/service/vprn/log/log-id/oper-state
/state/system/lldp/chassis-id
/state/system/lldp/chassis-id-subtype
/state/system/lldp/system-name
/state/system/lldp/system-description
/state/system/telemetry/grpc/subscription/path/deferred-collection-count
===============================================================================
opaque-database
opaque-database
Syntax
opaque-database [area area-id | as] [ adv-router router-id] [ls-id] [detail]
Context
[Tree] (show>router>ospf opaque-database)
Full Context
show router ospf opaque-database
Description
This command displays OSPF opaque database information.
Parameters
- area area-id
Displays all opaque databases configured in this area.
- as
Displays opaque databases configured in the autonomous system (AS).
- adv-router router-id [ls-id]
Displays opaque database information associated with the specified advertising router. To further narrow the number of items displayed, the ls-id can optionally be specified.
Platforms
All
Output
OSPF Opaque Database Output
OSPF Opaque Database Output Fields describes the OSPF opaque database output fields.
Label |
Description |
|---|---|
Area Id |
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
Type |
NSSA — This area is configured as an NSSA area. Area — This area is configured as a standard area (not NSSA or stub). Stub — This area is configured as an NSSA area. |
Link State Id |
The link state ID is an LSA type specific field containing either a Router-Id or an IP Address; it identifies the piece of the routing domain being described by the advertisement. |
Adv Rtr Id |
The router identifier of the router advertising the LSA. |
Age |
The age of the link state advertisement in seconds. |
Sequence |
The signed 32-bit integer sequence number. |
Cksum |
The 32-bit unsigned sum of the link-state advertisements' LS checksums. |
*A:Dut-C# show router ospf opaque-database
===============================================================================
Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type : All)
===============================================================================
Type Id Link State Id Adv Rtr Id Age Sequence Cksum
-------------------------------------------------------------------------------
Area 0.0.0.0 4.0.0.0 10.20.1.2 740 0x80000002 0x5653
Area 0.0.0.0 7.0.0.2 10.20.1.2 745 0x80000001 0xee35
Area 0.0.0.0 7.16.0.6 10.20.1.2 725 0x80000002 0xe434
Area 0.0.0.0 8.0.0.6 10.20.1.2 730 0x80000002 0x5f1d
Area 0.0.0.0 8.0.0.7 10.20.1.2 731 0x80000002 0xbeb8
Area 0.0.0.0 4.0.0.0 10.20.1.3 739 0x80000002 0x6dd6
Area 0.0.0.0 7.0.0.2 10.20.1.3 744 0x80000001 0x1601
Area 0.0.0.0 7.16.0.2 10.20.1.3 734 0x80000001 0x914
Area 0.0.0.0 8.0.0.6 10.20.1.3 728 0x80000002 0x8ac1
Area 0.0.0.0 8.0.0.7 10.20.1.3 729 0x80000002 0xf57b
Area 0.0.0.0 4.0.0.0 10.20.1.4 740 0x80000002 0x15ba
Area 0.0.0.0 7.0.0.2 10.20.1.4 745 0x80000001 0x3dcc
Area 0.0.0.0 7.16.0.3 10.20.1.4 736 0x80000001 0xda04
Area 0.0.0.0 8.0.0.4 10.20.1.4 732 0x80000002 0xfe4a
Area 0.0.0.0 8.0.0.5 10.20.1.4 732 0x80000002 0x4f1f
Area 0.0.0.0 4.0.0.0 10.20.1.5 738 0x80000002 0x746e
Area 0.0.0.0 7.0.0.2 10.20.1.5 744 0x80000001 0x6498
Area 0.0.0.0 7.16.0.6 10.20.1.5 730 0x80000001 0xb624
Area 0.0.0.0 8.0.0.4 10.20.1.5 729 0x80000002 0x50f1
Area 0.0.0.0 8.0.0.5 10.20.1.5 730 0x80000002 0xc279
Area 0.0.0.1 4.0.0.0 10.20.1.1 740 0x80000002 0xf5a0
Area 0.0.0.1 7.0.0.2 10.20.1.1 745 0x80000001 0xc769
Area 0.0.0.1 8.0.0.4 10.20.1.1 730 0x80000002 0x3f46
Area 0.0.0.1 8.0.0.5 10.20.1.1 731 0x80000002 0x7e02
Area 0.0.0.1 4.0.0.0 10.20.1.2 739 0x80000002 0x5653
Area 0.0.0.1 7.16.0.1 10.20.1.2 744 0x80000001 0x46cc
Area 0.0.0.1 7.16.0.2 10.20.1.2 735 0x80000001 0x9663
Area 0.0.0.1 7.16.0.3 10.20.1.2 734 0x80000001 0xe6f9
Area 0.0.0.1 7.16.0.4 10.20.1.2 725 0x80000002 0xad3d
Area 0.0.0.1 7.16.0.5 10.20.1.2 725 0x80000002 0x49b8
Area 0.0.0.1 8.0.0.4 10.20.1.2 730 0x80000002 0x3324
Area 0.0.0.1 8.0.0.5 10.20.1.2 731 0x80000002 0x89f3
Area 0.0.0.1 4.0.0.0 10.20.1.3 739 0x80000002 0x6dd6
Area 0.0.0.1 7.16.0.1 10.20.1.3 743 0x80000001 0x6d98
Area 0.0.0.1 7.16.0.3 10.20.1.3 723 0x80000002 0xdeff
Area 0.0.0.1 7.16.0.4 10.20.1.3 729 0x80000001 0xa941
Area 0.0.0.1 7.16.0.5 10.20.1.3 724 0x80000002 0x7084
Area 0.0.0.1 7.16.0.6 10.20.1.3 724 0x80000002 0xcff
Area 0.0.0.1 8.0.0.4 10.20.1.3 730 0x80000002 0xada2
Area 0.0.0.1 8.0.0.5 10.20.1.3 730 0x80000002 0x9bb2
-------------------------------------------------------------------------------
No. of Opaque LSAs: 40
===============================================================================
A:ALA-A# show router ospf 1 opaque-database
===============================================================================
Rtr Base OSPFv2 Instance 1 Opaque Link State Database (type : All)
===============================================================================
Area Id Type Link State Id Adv Rtr Id Age Sequence Cksum
-------------------------------------------------------------------------------
0.0.0.0 Area 1.0.0.1 180.0.0.2 205 0x8000007e 0xb1b2
0.0.0.0 Area 1.0.0.1 180.0.0.5 617 0x80000084 0xb1a6
0.0.0.0 Area 1.0.0.1 180.0.0.8 1635 0x80000081 0xc391
0.0.0.0 Area 1.0.0.1 180.0.0.9 1306 0x80000082 0xc58c
0.0.0.0 Area 1.0.0.1 180.0.0.10 53 0x80000082 0xc986
0.0.0.0 Area 1.0.0.1 180.0.0.11 577 0x8000007e 0xd57c
0.0.0.0 Area 1.0.0.1 180.0.0.12 1628 0x80000080 0xd578
0.0.0.0 Area 1.0.0.1 180.0.0.13 581 0x80000080 0xd972
0.0.0.0 Area 1.0.0.1 180.0.0.22 1006 0x80000080 0xfd3c
0.0.0.0 Area 1.0.0.1 180.0.0.23 1238 0x80000083 0xfb39
0.0.0.0 Area 1.0.0.1 180.0.0.27 55 0x80000083 0xc21
0.0.0.0 Area 1.0.0.1 180.0.0.28 389 0x80000083 0x101b
0.0.0.0 Area 1.0.0.1 180.0.0.29 1658 0x80000082 0x1614
0.0.0.0 Area 1.0.0.1 180.0.0.30 976 0x80000083 0x180f
0.0.0.0 Area 1.0.0.2 180.0.0.2 45 0x800000a0 0x2f60
0.0.0.0 Area 1.0.0.2 180.0.0.5 1357 0x80000084 0x7038
0.0.0.0 Area 1.0.0.2 180.0.0.8 1960 0x80000084 0x3472
...
-------------------------------------------------------------------------------
No. of Opaque LSAs: 88
===============================================================================
A:ALA-A#
*A:Dut-C# show router ospf opaque-database adv-router 10.20.1.5
===============================================================================
Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type : All)
===============================================================================
Type Id Link State Id Adv Rtr Id Age Sequence Cksum
-------------------------------------------------------------------------------
Area 0.0.0.0 4.0.0.0 10.20.1.5 750 0x80000002 0x746e
Area 0.0.0.0 7.0.0.2 10.20.1.5 756 0x80000001 0x6498
Area 0.0.0.0 7.16.0.6 10.20.1.5 742 0x80000001 0xb624
Area 0.0.0.0 8.0.0.4 10.20.1.5 741 0x80000002 0x50f1
Area 0.0.0.0 8.0.0.5 10.20.1.5 742 0x80000002 0xc279
-------------------------------------------------------------------------------
No. of Opaque LSAs: 5
===============================================================================
*A:Dut-C# show router ospf opaque-database adv-router 10.20.1.5 detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type : All) (detail)
===============================================================================
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5
Link State Id : 4.0.0.0 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0x746e
Age : 752 Length : 52
Options : E
Advertisement : Router Info
Capabilities (1) Len 4 :
0x14
SR algorithm (8) Len 1 :
0x0
SR label range (9) Len 12 :
Range-size=1001
Sub-TLV SID/label(1) len 3 :
label=25000
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5
Link State Id : 7.0.0.2 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x6498
Age : 758 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=1 pfxLen=32 AF=0 pfx=10.20.1.5
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=55
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5
Link State Id : 7.16.0.6 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xb624
Age : 744 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=10.20.1.6
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=66
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5
Link State Id : 8.0.0.4 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0x50f1
Age : 743 Length : 52
Options : E
Advertisement : Extended Link
TLV Extended link (1) Len 28 :
link Type=Transit (2) Id=1.3.5.5 Data=1.3.5.5
Sub-TLV LAN-Adj-SID (3) len 11 :
Flags=Value Local (0x60)
MT-ID=0 Weight=0 Neighbor-ID=10.20.1.3
SID/Index/Label=262139
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.5
Link State Id : 8.0.0.5 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0xc279
Age : 744 Length : 52
Options : E
Advertisement : Extended Link
TLV Extended link (1) Len 28 :
link Type=Transit (2) Id=1.4.5.5 Data=1.4.5.5
Sub-TLV LAN-Adj-SID (3) len
===============================================================================
*A:Dut-A# show router ospf 1 opaque-database adv-router 10.20.1.1 detail
==============================================================================
Rtr Base OSPFv2 Instance 1 Opaque Link State Database (type : All) (detail)
==============================================================================
------------------------------------------------------------------------------
Opaque LSA
------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.1
Link State Id : 1.0.0.1 LSA Type : Area Opaque
Sequence No : 0x80000028 Checksum : 0xb136
Age : 192 Length : 28
Options : E
Advertisement :
ROUTER-ID TLV (0001) Len 4 : 10.20.1.1
------------------------------------------------------------------------------
Opaque LSA
------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.1
Link State Id : 1.0.0.2 LSA Type : Area Opaque
Sequence No : 0x8000000d Checksum : 0x17f3
Age : 678 Length : 164
Options : E
Advertisement :
LINK INFO TLV (0002) Len 140 :
Sub-TLV: 1 Len: 1 LINK_TYPE : 2
Sub-TLV: 2 Len: 4 LINK_ID : 10.10.1.2
Sub-TLV: 3 Len: 4 LOC_IP_ADDR : 10.10.1.1
Sub-TLV: 4 Len: 4 REM_IP_ADDR : 0.0.0.0
Sub-TLV: 5 Len: 4 TE_METRIC : 1000
Sub-TLV: 6 Len: 4 MAX_BDWTH : 100000 Kbps
Sub-TLV: 7 Len: 4 RSRVBL_BDWTH : 800000 Kbps
Sub-TLV: 8 Len: 32 UNRSRVD_CLS0 :
P0: 80000 Kbps P1: 320000 Kbps P2: 320000 Kbps P3: 320000 Kbps
P4: 400000 Kbps P5: 400000 Kbps P6: 400000 Kbps P7: 80000 Kbps
Sub-TLV: 9 Len: 4 ADMIN_GROUP : 0 None
Sub-TLV: 17 Len: 36 TELK_BW_CONST:
BW Model : MAM
BC0: 80000 Kbps BC1: 0 Kbps BC2: 320000 Kbps BC3: 0 Kbps
BC4: 0 Kbps BC5: 400000 Kbps BC6: 0 Kbps BC7: 0 Kbps
==============================================================================
*A:Dut-A#
*A:Dut-F# show router ospf opaque-database adv-router 10.20.1.6 detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Opaque Link State Database (type: All) (detail)
===============================================================================
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 4.0.0.0 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0x590e
Age : 288 Length : 52
Options : E
Advertisement : Router Info
Capabilities (1) Len 4 :
0x14
SR algorithm (8) Len 2 :
0x0 0x2
SR label range (9) Len 12 :
Range-size=1000
Sub-TLV SID/label(1) len 3 :
label=70000
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 7.0.0.7 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x899a
Age : 292 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=1 pfxLen=32 AF=0 pfx=10.20.1.6
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=9
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.2 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x6d0b
Age : 292 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=1.0.66.6
Flags=Att Node (0xc0)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=3
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.9 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xfa1e
Age : 288 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=1.0.33.3
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=0
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.10 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x40d4
Age : 288 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=10.20.1.3
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=6
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.11 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xcb52
Age : 288 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=1.0.22.2
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=5
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.12 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x7898
Age : 288 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=10.20.1.1
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=10
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.13 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xff29
Age : 288 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=1.0.11.1
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=4
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 8.0.0.2 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0x3098
Age : 289 Length : 48
Options : E
Advertisement : Extended Link
TLV Extended link (1) Len 24 :
link Type=P2P (1) Id=10.20.1.2 Data=1.0.26.6
Sub-TLV Adj-SID (2) len 7 :
Flags=Backup Value Local (0xe0)
MT-ID=0 Weight=0 SID/Index/Label=262143
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.20.1.6
Link State Id : 8.0.0.4 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0xc9b
Age : 289 Length : 48
Options : E
Advertisement : Extended Link
TLV Extended link (1) Len 24 :
link Type=P2P (1) Id=10.20.1.5 Data=1.0.56.6
Sub-TLV Adj-SID (2) len 7 :
Flags=Backup Value Local (0xe0)
MT-ID=0 Weight=0 SID/Index/Label=262141
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 4.0.0.0 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0x590e
Age : 290 Length : 52
Options : E
Advertisement : Router Info
Capabilities (1) Len 4 :
0x14
SR algorithm (8) Len 2 :
0x0 0x2
SR label range (9) Len 12 :
Range-size=1000
Sub-TLV SID/label(1) len 3 :
label=70000
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.0.0.6 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xf214
Age : 295 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=1 pfxLen=32 AF=0 pfx=1.0.66.6
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=3
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.1 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x7cc6
Age : 290 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=1 pfxLen=32 AF=0 pfx=1.0.22.2
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP Backup (0x42)
MT-ID=0 Algorithm=2 SID/Index/Label=996
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.3 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x491
Age : 296 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=10.20.1.6
Flags=Att Node (0xc0)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=9
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.4 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x9c67
Age : 291 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=1.0.55.5
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=2
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.5 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xc253
Age : 291 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=10.20.1.5
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=8
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.6 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xd03e
Age : 291 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=1.0.44.4
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=1
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.7 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0x868f
Age : 291 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=10.20.1.4
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=7
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 7.16.0.8 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xc84a
Age : 291 Length : 44
Options : E
Advertisement : Extended Prefix
TLV Extended prefix (1) Len 20 :
rtType=3 pfxLen=32 AF=0 pfx=10.20.1.2
Flags=Node (0x40)
Sub-TLV Prefix SID (2) len 8 :
Flags=noPHP (0x40)
MT-ID=0 Algorithm=0 SID/Index/Label=11
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 8.0.0.3 LSA Type : Area Opaque
Sequence No : 0x80000002 Checksum : 0xc1fb
Age : 292 Length : 48
Options : E
Advertisement : Extended Link
TLV Extended link (1) Len 24 :
link Type=P2P (1) Id=10.20.1.3 Data=1.0.36.6
Sub-TLV Adj-SID (2) len 7 :
Flags=Backup Value Local (0xe0)
MT-ID=0 Weight=0 SID/Index/Label=262142
-------------------------------------------------------------------------------
Opaque LSA
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 8.0.0.5 LSA Type : Area Opaque
Sequence No : 0x80000001 Checksum : 0xbc0d
Age : 298 Length : 48
Options : E
Advertisement : Extended Link
TLV Extended link (1) Len 24 :
link Type=P2P (1) Id=10.20.1.2 Data=1.0.26.6
Sub-TLV Adj-SID (2) len 7 :
Flags=Backup Value Local (0xe0)
MT-ID=0 Weight=0 SID/Index/Label=262140
===============================================================================
*A:Dut-F#
open-flow
open-flow
Syntax
open-flow
Context
[Tree] (show open-flow)
Full Context
show open-flow
Description
Displays OpenFlow switch hybrid information.
Platforms
All
open-flow
Syntax
open-flow of-switch ofs-name controller ip-address:port [channel channel-id] statistics
open-flow of-switch ofs-name controller ip-address:port [vprn service-id ofc-loopback ip-address] statistics
Context
[Tree] (clear open-flow)
Full Context
clear open-flow
Description
This command clears the OpenFlow statistics.
Parameters
- ofs-name
Specifies the name of the OFS instance, up to 32 characters.
- ip-address:port
Specifies the IP address and TCP port for the OpenFlow channel to the controller.
- channel-id
Specifies the channel ID.
- service-id
Specifies the service ID.
- ip-address
Specifies the IP address for the OpenFlow channel to the controller.
Platforms
All
open-flow
Syntax
open-flow
Context
[Tree] (tools>dump open-flow)
Full Context
tools dump open-flow
Description
This command enables dumping of the OpenFlow information.
Platforms
All
oper-group
oper-group
Syntax
oper-group [group-name]
oper-group [group-name] detail
oper-group [group-name] members [sap] [ sdp] [site] [bgp-evpn]
oper-group [group-name] monitoring [sap] [ sdp] [site] [mvrp]
Context
[Tree] (show>service oper-group)
Full Context
show service oper-group
Description
This command displays oper-group information, member count, monitor-client count, and status in a single line for each of the configured oper-groups.
Parameters
- group-name
Displays oper-group information.
- detail
Displays detailed information for each of the configured oper-groups.
- members
Displays the members of the specified oper-group, or all oper-groups. A filter can be applied on the output to display only required member type, by specifying an optional parameter.
- monitoring
displays the clients that are monitoring the specified oper-group, or all oper-groups. A filter can be applied on the output to display only required client type, by specifying an optional parameter.
Platforms
All
Output
The following displays server oper group information. oper-group detail Field Descriptions describes the output fields.
Sample Output*A:Dut-B# show service oper-group
===============================================================================
Service Oper Group Information
===============================================================================
Name Oper Creation Hold Hold Members Monitor
Status Origin UpTime DnTime
(secs) (secs)
-------------------------------------------------------------------------------
og-test up manual 4 0 4 4
-------------------------------------------------------------------------------
Entries found: 1
=====================================================================
*A:Dut-B#
*A:Dut-B# show service oper-group detail
=====================================================================
Service Oper Group Information
=====================================================================
Oper Group : og-test
Creation Origin : manual Oper Status : up
Hold DownTime : 0 secs Hold UpTime : 4 secs
Members : 4 Monitoring : 4
=====================================================================
Member SDP-Binds for OperGroup: og-test
===================================================================
SdpId SvcId Type IP address Adm Opr
-------------------------------------------------------------------
201:1 1 Spok 10.20.1.1 Up Up
201:2 1 Spok 10.20.1.1 Up Up
-------------------------------------------------------------------
SDP Entries found: 4
===================================================================
===================================================================
Monitoring SDP-Binds for OperGroup: og-test
===================================================================
SdpId SvcId Type IP address Adm Opr
-------------------------------------------------------------------
205:1 1 Spok 10.20.1.5 Up Up
205:2 1 Spok 10.20.1.5 Up Up
-------------------------------------------------------------------
SDP Entries found: 4
===================================================================
A:admin@PE-2# show service oper-group "llf-1" detail
===============================================================================
Service Oper Group Information
===============================================================================
Oper Group : llf-1
Creation Origin : manual Oper Status: down
Hold DownTime : 0 secs Hold UpTime: 4 secs
Members : 1 Monitoring : 1
===============================================================================
===============================================================================
Member BGP-EVPN for OperGroup: llf-1
===============================================================================
SvcId:Instance (Type) Status
-------------------------------------------------------------------------------
500:1 (mpls) Inactive
-------------------------------------------------------------------------------
BGP-EVPN Entries found: 1
===============================================================================
===============================================================================
Monitoring LAG for OperGroup: llf-1
===============================================================================
Lag-Id Adm Opr Weighted Threshold Up-Count Act/Stdby
-------------------------------------------------------------------------------
1 up down No 0 0 N/A
-------------------------------------------------------------------------------
LAG Entries found: 1
===============================================================================
*A:ALA-12>config# show service oper-group "test" monitoring
===============================================================================
Monitoring Ports for OperGroup: test
===============================================================================
PortId Admin-state Oper-state
-------------------------------------------------------------------------------
1/1/1 down down
-------------------------------------------------------------------------------
Port Entries found: 1
===============================================================================
Label |
Description |
|---|---|
PortId |
The port ID being monitored. |
Adm Admin-state |
Displays the administrative state. |
Opr Oper-state |
Displays the operational state. |
Oper Group |
The name of the operational group being monitored. |
Creation Origin |
Displays how the operational group was created. |
Oper Status |
Displays the operational status. |
Hold Downtime |
Displays the time, in seconds, that the system waits before declaring the status as "down”. |
Hold UpTime |
Displays the time, in seconds, that the system waits before declaring the status as "up”. |
Members |
Displays the number of members. |
Monitoring |
Displays the number of objects monitoring the operational group. |
SdpId |
Displays the SDP ID. |
SvcId |
Displays the SVC ID. |
Type |
Displays the type of SDP binding. |
IP address |
Displays the IP address |
SvcId:Instance |
Displays the SVC ID and EVPN instance number. |
(Type) |
Displays the instance type. |
Status |
Displays the status of the EVPN instance. |
Lag-Id |
Displays the monitoring LAG ID. |
Weighted |
Displays whether or not the LAG is weighted. |
Threshold |
Displays the threshold number. |
Up-Count |
Displays the up-count number. |
Act/Stdby |
Displays whether the LAG is active or standby. |
optimal-route-reflection
optimal-route-reflection
Syntax
optimal-route-reflection
Context
[Tree] (show>router>bgp optimal-route-reflection)
Full Context
show router bgp optimal-route-reflection
Description
Commands in this context display optimal route reflection (ORR) information.
Platforms
All
origin-validation
origin-validation
Syntax
origin-validation
Context
[Tree] (show>router origin-validation)
Full Context
show router origin-validation
Description
Commands in this context display origin validation information.
Platforms
All
origin-validation
Syntax
origin-validation rpki-session ip-address
Context
[Tree] (clear>router origin-validation)
Full Context
clear router origin-validation
Description
This command creates the context to clear and reset origin validation entities.
Parameters
- ip-address
Clears the origin validation entities associated with the specified IP address.
Platforms
All
ospf
ospf
Syntax
ospf [instance ospf-instance] [ area area-id]
Context
[Tree] (tools>dump>router>te-database ospf)
Full Context
tools dump router te-database ospf
Description
Commands in this context dump the OSPF traffic engineering database.
Parameters
- ospf-instance
Specifies the OSPF instance.
- area-id
Specifies the OSPF area ID.
Platforms
All
Output
The following outputs are examples of OSPF traffic engineering database information.
Sample Output*A:Dut-C# tools dump router te-database ospf
===================================================================================
Rtr: 10.10.10.3 Addr: 10.10.10.3 OSPF/0/0.0.0.0
Rtr: 10.10.10.4 Addr: 0.0.0.0 OSPF/0/0.0.0.0
AdvRtr: 10.10.10.3 Nghb: 10.10.10.4 OSPF/0/0.0.0.0
LocIp/Id 100.100.101.2 /0 Status: OK
AdvRtr: 10.10.10.4 Nghb: 10.10.10.3 OSPF/0/0.0.0.0
LocIp/Id 100.100.101.1 /0 Status: OK
===================================================================================
*A:Dut-C# tools dump router te-database detail ospf
===================================================================================
Rtr: 10.10.10.3 Addr: 10.10.10.3 OSPF/0/0.0.0.0
Rtr: 10.10.10.4 Addr: 0.0.0.0 OSPF/0/0.0.0.0
-----------------------------------------------------------------------------------
AdvRtr: 10.10.10.3 Nghb: 10.10.10.4 OSPF/0/0.0.0.0
Local Addr: 100.100.101.2 Local Id: 0 If Index: 3
Remote Addr: 0.0.0.0 Remote Id: 0 Link Type: p2p
status: OK
IGP Metric: 100
-----------------------------------------------------------------------------------
AdvRtr: 10.10.10.4 Nghb: 10.10.10.3 OSPF/0/0.0.0.0
Local Addr: 100.100.101.1 Local Id: 0 If Index: 0
Remote Addr: 0.0.0.0 Remote Id: 0 Link Type: p2p
status: OK
IGP Metric: 100
===================================================================================
*A:Dut-C#
ospf
Syntax
ospf [ospf-instance | all]
Context
[Tree] (show>router ospf)
Full Context
show router ospf
Description
Commands in this context display OSPF information.
Parameters
- ospf-instance
Shows the specified OSPF instance.
- all
Shows all configured OSPF instances.
Platforms
All
ospf
Syntax
ospf [ospf-instance]
Context
[Tree] (clear>router ospf)
Full Context
clear router ospf
Description
This command clears and resets OSPF protocol entities.
Parameters
- ospf-instance
Clears the specified OSPF instance.
Platforms
All
ospf
Syntax
ospf
Context
[Tree] (show ospf)
Full Context
show ospf
Description
This command displays OSPFv2 related information for all instances.
Platforms
All
ospf
Syntax
ospf
Context
[Tree] (tools>dump>router ospf)
Full Context
tools dump router ospf
Description
This command enters the context to dump OSPFv2 related information.
Platforms
All
ospf
Syntax
ospf
Context
[Tree] (tools>perform>router ospf)
Full Context
tools perform router ospf
Description
Commands in this context perform OSPFv2 tasks.
Platforms
All
ospf
Syntax
ospf [ospf-instance]
Context
[Tree] (monitor>router ospf)
Full Context
monitor router ospf
Description
Commands in this context configure monitor commands for the OSPF instance.
Parameters
- ospf-instance
Specifies the OSPF instance.
Platforms
All
ospf3
ospf3
Syntax
ospf3 [instance ospf-instance] [ area area-id]
Context
[Tree] (tools>dump>router>te-database ospf3)
Full Context
tools dump router te-database ospf3
Description
Commands in this context dump the OSPF3 traffic engineering database.
Parameters
- ospf-instance
Specifies the OSPF3 instance.
- area-id
Specifies the OSPF3 area ID.
Platforms
All
Output
The following outputs are examples of OSPF3 traffic engineering database information.
Sample Output*A:Dut-C# tools dump router te-database ospf3
===================================================================================
Rtr: 10.10.10.5 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0
Rtr: 255.0.0.0 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0
AdvRtr: 10.10.10.5 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0
LocIp/Id 0.0.0.0 /4 Status: NO-RTRID
AdvRtr: 255.0.0.0 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0
LocIp/Id 0.0.0.0 /2 Status: NO-RTRID
Net: 0.0.0.4:10.10.10.5 RTR V6 EXP OSPFv3/0/0.0.0.0
AttRtr: 10.10.10.5 EXP OSPFv3/0/0.0.0.0
AttRtr: 255.0.0.0 EXP OSPFv3/0/0.0.0.0
===================================================================================
*A:Dut-C#
*A:Dut-C# tools dump router te-database detail ospf3
===================================================================================
Rtr: 10.10.10.5 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0
Pfx: 2001:db8::3/128 INTRA-AREA Metric: 0 EXP
Pfx: 2001:db8:1::/64 INTRA-AREA Metric: 0 EXP
Rtr: 255.0.0.0 Addr: 0.0.0.0 RTR V6 EXP OSPFv3/0/0.0.0.0
Pfx: 2001:db8::5/128 INTRA-AREA Metric: 0 EXP
-----------------------------------------------------------------------------------
AdvRtr: 10.10.10.5 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0
Local Addr: 0.0.0.0 Local Id: 4 If Index: 4
Remote Addr: 0.0.0.0 Remote Id: 4 Link Type: TRANS
status: NO-RTRID
IGP Metric: 100
-----------------------------------------------------------------------------------
AdvRtr: 255.0.0.0 Nghb: 0.0.0.4:10.10.10.5 EXP OSPFv3/0/0.0.0.0
Local Addr: 0.0.0.0 Local Id: 2 If Index: 0
Remote Addr: 0.0.0.0 Remote Id: 4 Link Type: TRANS
status: NO-RTRID
IGP Metric: 100
-----------------------------------------------------------------------------------
Net: 0.0.0.4:10.10.10.5 RTR V6 EXP OSPFv3/0/0.0.0.0
AttRtr: 10.10.10.5 EXP OSPFv3/0/0.0.0.0
AttRtr: 255.0.0.0 EXP OSPFv3/0/0.0.0.0
===================================================================================
*A:Dut-C#
ospf3
Syntax
ospf3 [ospf-instance]
Context
[Tree] (tools>perform>router ospf3)
Full Context
tools perform router ospf3
Description
Commands in this context perform OSPF3 tasks.
Parameters
- ospf-instance
Shows the specified OSPF3 instance.
Platforms
All
ospf3
Syntax
ospf3 [ospf-instance | all]
Context
[Tree] (show>router ospf3)
Full Context
show router ospf3
Description
Commands in this context display OSPF3 information.
Parameters
- ospf-instance
Shows the specified OSPF3 instance.
- all
Shows all configured OSPF3 instances.
Platforms
All
ospf3
Syntax
ospf3 [ospf-instance]
Context
[Tree] (clear>router ospf3)
Full Context
clear router ospf3
Description
This command clears and resets OSPF3 protocol entities.
Parameters
- ospf-instance
Clears the specified OSPF3 instance.
Platforms
All
ospf3
Syntax
ospf3
Context
[Tree] (show ospf3)
Full Context
show ospf3
Description
This command displays OSPFv3 related information for all instances.
Platforms
All
ospf3
Syntax
ospf3
Context
[Tree] (tools>dump>router ospf3)
Full Context
tools dump router ospf3
Description
Commands in this context dump OSPFv3 related information.
Platforms
All
ospf3
Syntax
ospf [ospf-instance]
Context
[Tree] (monitor>router ospf3)
Full Context
monitor router ospf3
Description
Commands in this context configure monitor commands for the OSPF3 instance.
Parameters
- ospf-instance
Specifies the OSPF3 instance.
Platforms
All
overload
overload
Syntax
overload
overload card slot-number fp fp-number
overload card slot-number fp fp-number cpm-ip
overload card slot-number fp fp-number cpm-ipv6
overload card slot-number fp fp-number cpm-mac
overload card slot-number fp fp-number ip ip-filter-id direction direction
overload card slot-number fp fp-number ipv6 ipv6-filter-id direction direction
overload card slot-number fp fp-number mac mac-filter-id direction direction
Context
[Tree] (tools>dump>filter overload)
Full Context
tools dump filter overload
Description
This command, when used without parameters, allows the operator to identify filter memory banks with one or more policies in overload in the system by slot number, FP number, direction (ingress or egress), and type (IP-MAC or IPv6).
The command, when used with only the card and fp parameters, lists the filter policy ID as well as the number of entries in overload on a specified FP when the optional parameters slot-number and fp-number are specified.
This command, when used with the ip, ipv6, or mac parameters in conjunction with the direction parameter, displays the entries not programmed for a specified filter policy due to an overload condition.
This command, when used with the cpm-ip, cpm-ipv6, or cpm-mac parameters, displays the entries not programmed for a specified CPM filter policy. This command is available on applicable platforms only. Refer to the 7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide, CPM Filters and Traffic Management section for more details.
Parameters
- slot-number
Specifies the IOM slot number or CPM for the overload command.
- fp-number
Specifies the FP number.
- ip-filter-id
Specifies the IP filter policy ID or name for which to display information.
- direction
Specifies the direction.
- ipv6-filter-id
Specifies the IPv6 filter policy ID or name for which to display information.
- mac-filter-id
Specifies the MAC filter ID policy for which to display information. Values can be expressed in different formats and refer to static or dynamic filters. The following values only shows decimal integer format.
Platforms
All
Output
The following output is an example of filter overload status.
Sample Output*A:Dut# tools dump filter overload
==========================================================
Filter Overload Status
==========================================================
Slot FP Dir Type
----------------------------------------------------------
1 1 Ing ip-mac
1 1 Egr ipv6
==========================================================
Sample overload output with card and fp parameters only:
A:Dut# tools dump filter overload card 1 fp 1
==========================================================
Filter Overload Status
==========================================================
Slot FP Dir Type Filter #Entries
----------------------------------------------------------
1 1 Ing ip 5 1
1 1 Egr ipv6 40008 10
==========================================================
Sample overload output with card, fp, {cpm-ip, cpm-ipv6, or cpm-mac} parameters only:
*A:Dut# tools dump filter overload card "a" fp 1 cpm-ipv6
==========================================================
Filter Overload Status
==========================================================
Slot FP Dir Type Filter Entry
----------------------------------------------------------
A 1 cpm-ipv6 168
==========================================================
Sample overload output with card, fp, {ip, ipv6, or mac} and direction parameters only:
*A:Dut# tools dump filter overload card 1 fp 1 ip 9 direction ingress
==========================================================
Filter Overload Status
==========================================================
Slot FP Dir Type Filter Entry
----------------------------------------------------------
1 1 Ing ip 9 100
==========================================================
overload
Syntax
overload {rtm | fib | prefix-limit}
Context
[Tree] (clear>router>isis overload)
Full Context
clear router isis overload
Description
This command clears the IS-IS overload.
Parameters
- rtm
Clears the overload because IS-IS reached the configured maximum route limit set with maximum-routes or maximum-ipv6-routes in a VPRN.
- fib
Clears the overload because adding routes to the hardware FIB failed.
- prefix-limit
Clears the overload when IS-IS has reached the configured maximum prefix limit set with the prefix-limit command.
Platforms
All
overload
Syntax
overload {rtm | fib | rtr-adv-lsa-limit}
Context
[Tree] (clear>router>ospf overload)
[Tree] (clear>router>ospf3 overload)
Full Context
clear router ospf overload
clear router ospf3 overload
Description
This command clears the OSPF or OSPF3 overload.
Parameters
- rtm
Clears the overload because OSPF or OSPF3 reached the configured maximum route limit set with maximum-routes or maximum-ipv6-routes in a VPRN.
- fib
Clears the overload because adding routes to the hardware FIB failed.
- rtr-adv-lsa-limit
Clears the overload because OSPF or OSPF3 exceeded the configured maximum limit on LSAs advertised by another router, which was set with rtr-adv-lsa-limit.
Platforms
All