v Commands
vas-filter
vas-filter
Syntax
vas-filter name [entry [ entry]]
vas-filter
Context
[Tree] (show>subscr-mgmt>isa-svc-chain vas-filter)
Full Context
show subscriber-mgmt isa-service-chaining vas-filter
Description
This command displays VAS filter information.
Parameters
- name
Displays information about the specified name of the VAS filter.
- entry
Displays information about the specified VAS filter entry
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following is an example of VAS filter information.
Sample Outputshow subscriber-mgmt isa-service-chaining vas-filter "foo"
====================================================================
ISA Service Chaining - VAS Filter "vas-filter"
====================================================================
Description : (Not Specified)
-------------------------------------------------------------------------------
Entry : 1
Admin State : in-service
Description : (Not Specified)
Match
Protocol : udp
Foreign IP : 12.1.1.1/24
Foreign Port : 2000
Action upstream
Fail Action : forward
Forwarding
Forward IP : 40.1.0.1
Service : 11
ESI : N/A
Network Service Header
Service Path : 32
Service Index : 2
Insert Sub-Id : disabled
Meta Data : 0xaabbccdd
Action downstream
Fail Action : forward
Forwarding
Forward IP : 30.1.0.1
Service : 11
ESI : N/A
Network Service Header
Service Path : 32
Service Index : 2
Insert Sub-Id : disabled
Meta Data : 0xaabbccdd
Label |
Description |
|---|---|
Description |
The text string describing the VAS filter |
Entry |
The ID of the entry in the VAS filter |
Admin State |
The administrative state of the entry in the VAS filter |
Match |
Protocol — The IP protocol to match in this entry of the VAS filter Foreign IP — The foreign IP address to match in this entry of the VAS filter Foreign Port — The foreign port to match in this entry of the VAS filter |
Action |
upstream — Indicates the upstream direction for the action in the VAS filter entry downstream — Indicates the downstream direction for the action in the VAS filter entry |
Fail Action |
Forwarding IP — The forwarding Service Function IP address for the action in a VAS filter entry Service — The forwarding service for the action in a VAS filter entry ESA — The ESI for the action in a VAS filter entry |
Network Service Header |
Service Path — The path ID used to construct an NSH (Network Service Header) for the action in a VAS filter entry |
Service Index — The service ID used to construct an NSH for the action in a VAS filter entry |
|
Insert Sub-ID disabled — The subscriber ID is not inserted with meta data to construct an NSH for the action in a VAS filter entry enabled — The subscriber ID is inserted with meta data to construct an NSH for the action in a VAS filter entry |
|
Meta Data — The opaque metadata used to construct an NSH (Network Service Header) for the action in a VAS filter entry |
vas-tunnel
vas-tunnel
Syntax
vas-tunnel [connection-id]
Context
[Tree] (show>router>l2tp vas-tunnel)
Full Context
show router l2tp vas-tunnel
Description
This command displays L2TP VAS tunnel operational information.
Parameters
- connection-id
Specifies the identification number for an L2TP VAS tunnel connection.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output displays L2TP VAS tunnel information.
Sample Output*A:Dut-C# show subscriber-mgmt steering-profile "steeringprof01"
===============================================================================
Steering Profile "steeringprof01"
===============================================================================
Operational State : in-service
Reference Count : 1
Description : LAC Traffic Steering Profile 01
Access Router : access_router
Network Nexthop : 10.10.20.2
Network Router : network_router
===============================================================================
*A:Dut-C#
*A:Dut-C# show router service-name "access_router" l2tp vas-tunnel
=================================================================
L2TP VAS Tunnel Summary (222)
=================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID Base-vRtrID
-----------------------------------------------------------------
598212608 9128 1 Base
-----------------------------------------------------------------
No. of VAS Tunnels: 1
=================================================================
*A:Dut-C#
*A:Dut-C# show router service-name "access_router" l2tp vas-tunnel 598212608
===============================================================================
L2TP Tunnel 598212608 (222)
===============================================================================
Transport Type : udpIp
Router ID : 222
Base Router ID : Base
Local Connection ID : 598212608
Local Tunnel ID : 9128
Local IP Address : 10.20.1.3
Local UDP Port : 1701
Remote Connection ID : 65536
Remote Tunnel ID : 1
Remote IP Address : 10.10.40.2
Remote UDP Port : 7777
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sessions
-------------------------------------------------------------------------------
Loc Session Conn ID Loc Session ID Rem Session Conn ID Rem Session ID
-------------------------------------------------------------------------------
598227315 14707 65537 1
-------------------------------------------------------------------------------
No. of Sessions: 1
-------------------------------------------------------------------------------
*A:Dut-C#
*A:Dut-C# show service id "pppoe_service" pppoe session l2tp-connection-id 598227315 detail
===============================================================================
PPPoE sessions for svc-id 111
===============================================================================
Sap Id Mac Address Sid Up Time Type
IP/L2TP-Id/Interface-Id MC-Stdby
-------------------------------------------------------------------------------
1/1/1 00:10:94:00:00:01 1 0d 00:45:26 lac
598227315
PPP User-Name : user01
Subscriber-interface : subif01
Group-interface : grpif01
Subscriber : "sub01"
Sub-Profile-String : "subprof01"
SLA-Profile-String : "slaprof01"
SPI group ID : (Not Specified)
ANCP-String : ""
Int-Dest-Id : ""
App-Profile-String : ""
Category-Map-Name : ""
Acct-Session-Id : "1412FF000000005E85A5C6"
Sap-Session-Index : 1
L2TP Router Name : Base
L2TP Group Name : default_radius_group
L2TP Assignment ID : unnamed
L2TP Steering Profile: steeringprof01
L2TP Steering State : steered
Circuit-Id :
Remote-Id :
Radius Session-TO : N/A
Radius Class :
Radius User-Name : user01
Logical-Line-Id :
Service-Name :
-------------------------------------------------------------------------------
Number of sessions : 1
===============================================================================
vccv-bfd
vccv-bfd
Syntax
vccv-bfd [session]
Context
[Tree] (show>service>id vccv-bfd)
Full Context
show service id vccv-bfd
Description
This command shows whether VCCV BFD is configured for a particular service and information about the VCCV session state.
The show>service>id>vccv-bfd session command gives a summary of all the VCCV sessions. Using both the sdp-id and the vc-id parameters gives VCCV BFD session information about a specific spoke-SDP.
For services where auto-discovery and signaling are used (for example, BGP VPWS, VPLS, and BGP-AD VPLS), use the show>service>id>detail command to determine the sdp-id and vc-id parameters allocated by the system.
Parameters
- session
Displays a summary of all VCCV sessions.
Platforms
All
Output
The following output is an example of VCCV BFD information.
Sample Output*A:Dut-C# show service id 1000 vccv-bfd session
===============================================================================
BFD Session
===============================================================================
Interface/Lsp Name State Tx Intvl Rx Intvl Multipl
Remote Address/Info Protocols Tx Pkts Rx Pkts Type
LAG port/sdp-id:vc-id LAG ID/SvcId
-------------------------------------------------------------------------------
N/A Up (3) 1000 1000 3
N/A vccv 152 151 central
100:100 1000
-------------------------------------------------------------------------------
No. of BFD sessions: 1
===============================================================================
vccv-bfd
Syntax
vccv-bfd [session]
Context
[Tree] (show>service vccv-bfd)
Full Context
show service vccv-bfd
Description
This command displays the VCCV BFD session for the system.
Platforms
All
version
version
Syntax
version
Context
[Tree] (show>app-assure version)
Full Context
show application-assurance version
Description
This command displays the versions of the isa-aa.tim used by the CPM and the AA ISAs.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following is an example show output for the version command.
Sample OutputA:ALU>show>app-assure# version
===============================================================================
Versions of isa-aa.tim in use
===============================================================================
CPM : TiMOS-M-7.0.R4
1/1 : TiMOS-I-7.0.R1
2/1 : TiMOS-I-7.0.R1
3/2 : TiMOS-I-7.0.R1
===============================================================================
A:ALU>show>app-assure#
version
Syntax
version group-interface [fwd-service service-id] ip-in-name
version group-interface all
version host ip-address
version host all
version [interface ip-int-name | ip-address]
Context
[Tree] (clear>router>igmp version)
Full Context
clear router igmp version
Description
This command clears the IGMP version on a specified interface or IP address.
Parameters
- group-interface interface-name
Clears the IGMP version on the specified group interface.
- group-interface all
Clears the IGMP version on all group interfaces.
- service-id
Specifies the service ID.
- host ip-address
Clears the IGMP version on the specified host.
- host all
Clears the IGMP version on all hosts.
- interface ip-int-name
Clears the IGMP version on the specified interface.
- interface ip-address
Clears the IGMP version on the specified IP address.
Platforms
All
version
Syntax
version group-interface [fwd-service service-id] ip-int-name
version group-interface all
version host ipv6-address
version host all
version [ip-int-name | ipv6-address]
Context
[Tree] (clear>router>mld version)
Full Context
clear router mld version
Description
This command clears MLD version parameters.
Parameters
- group-interface interface-name
Clears the MLD version on the specified group interface.
- group-interface all
Clears the MLD version on all group interfaces.
- service-id
Clears the MLD version information for the service ID.
- host ipv6-address
Clears the MLD version on the specified host.
- host all
Clears the MLD version on all hosts.
- ip-int-name
Clears version information for the specified MLD interface name.
- ipv6-address
Clears version information for the specified MLD IPv6 address.
Platforms
All
version
Syntax
version
Context
[Tree] (show version)
Full Context
show version
Description
This command displays system version information.
Platforms
All
video
video
Syntax
video
Context
[Tree] (clear video)
Full Context
clear video
Description
Commands in this context clear video related commands.
Platforms
7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s
video
Syntax
video
Context
[Tree] (show video)
Full Context
show video
Description
Commands in this context display video information.
Platforms
7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s
video-group
video-group
Syntax
video-group [video-group-id] [peak-last-hour]
Context
[Tree] (show>isa video-group)
Full Context
show isa video-group
Description
This command displays ISA video group information.
Parameters
- video-group-id
Specifies the ISA video group ID.
- peak-last-hour
Displays the peak FCC/RET session and bandwidth for the current hour, the last hour, and the lifetime.
Platforms
7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s
Output
The following are example outputs for this command.
Sample OutputA:SR-7/Dut-C# show isa video-group
===============================================================================
ISA Video Group
===============================================================================
Video Group Id : 1 Admin State : Up
Oper State : Up RT Server State : Enabled
FCC Server State : Disabled ADI State : Disabled
RT Resv Bandwidth(Mbps): 0 ADI State : Disabled
MDA : 2/1 Channels : 2
Admin State : Up Oper State : Up
Used Cache (bytes) : 586622 Available Cache (bytes): 1869186816
Mem alloc failures : 0 Dropped pkts (denting) : 0
Failed Chnl Allocs : 0 Egress Bandwidth excee*: 0
Bandwidth in use(kbps) : 0 Peak Bandwidth(kbps) : 200
Egress stream resets : 0 Ingress stream resets : 53
Ad stream resets : 0 Ad stream aborts : 0
SSRC collisions : 0 Received data packets : 4521
Received data octets : 6284714 Rx data packet errors : 0
Transmitted data packts: 1183 Transmitted data octets: 1646212
Tx data packet errors : 0 Tx lost data packets : 47
Active RTCP sessions : 1 Requested RTP Packets : 968
RTCP Parse Errors : 0 RTCP Config Errors : 0
RTCP IPC Errors : 0 RTCP SG Errors : 0
RTCP Subscriber Errors : 0 RTCP Interface Errors : 0
Total RET BW (Kbps) : 0 Max. RET BW (Kbps) : 100
Total FCC BW (Kbps) : 0 Drop Count for FCC : 0
Mcast RET Req for RTCP : 0 Mcast RET Req for RUDP : 0
Mcast RET Created : 0 Mcast RET Req Quenched : 0
HighPkt pool limit hit : 0
Pkts Lost (2-10) : 24 Pkts Lost (11-20) : 48
Pkts Lost (21-30) : 0 Pkts Lost (31-40) : 0
Pkts Lost ( >40) : 0
-------------------------------------------------------------------------------
Video-groups : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:SR-7/Dut-C#
*A:Dut-C# show isa video-group 1 peak-last-hour
===============================================================================
ISA Video Group
===============================================================================
Video Group Id : 1 Admin State : Up
Oper State : Up RT Server State : Disabled
FCC Server State : Enabled ADI State : Disabled
Analyzer State : Disabled Str Sel State : Disabled
RT Resv Bandwidth(Mbps): 0 RT Client : Enabled
-------------------------------------------------------------------------------
ESA-VM : 7/1 Channels : 1
Admin State : Up Oper State : Up
Used Cache (bytes) : 4465664 Available Cache (bytes): 2858537472
Mem alloc failures : 0 Dropped pkts (denting) : 0
Failed Chnl Allocs : 0 Egress Bandwidth excee*: 0
Bandwidth in use(kbps) : 0 Peak Bandwidth(kbps) : 8658
Egress stream resets : 0 Ingress stream resets : 153
Ad stream resets : 0 Ad stream aborts : 0
SSRC collisions : 0 Received data packets : 130779
Received data octets : 181782810 Rx data packet errors : 0
Transmitted data packts: 10711 Transmitted data octets: 14888290
Tx data packet errors : 0 Tx lost data packets : 0
Active RTCP sessions : 1 Requested RTP Packets : 0
RTCP Parse Errors : 0 RTCP Config Errors : 0
RTCP IPC Errors : 0 RTCP SG Errors : 0
RTCP Subscriber Errors : 0 RTCP Interface Errors : 0
Total RET BW (Kbps) : 0 Max. RET BW (Kbps) : 0
Total FCC BW (Kbps) : 0 Drop Count for FCC : 0
Mcast RET Req for RTCP : 0 Mcast RET Req for RUDP : 0
Mcast RET Created : 0 Mcast RET Req Quenched : 0
HighPkt pool limit hit : 0
Pkts Lost (1-10) : 0 Pkts Lost (11-20) : 0
Pkts Lost (21-30) : 0 Pkts Lost (31-40) : 0
Pkts Lost ( >40) : 0
-------------------------------------------------------------------------------
ESA-VM 7/1 Summary current hour (12:53:06 to 13:14:50)
BW (Kbps) Time
Peak FCC 8658 Mon Jun 7 13:14:10 UTC 2021
Peak RET 0 Never
Peak Total 8658 Mon Jun 7 13:14:10 UTC 2021
Sessions Time
Peak FCC 1 Mon Jun 7 13:14:10 UTC 2021
Peak RET 0 Never
Peak Total 1 Mon Jun 7 13:14:10 UTC 2021
-------------------------------------------------------------------------------
ESA-VM 7/1 Summary last hour (11:53:06 to 12:53:06)
BW (Kbps) Time
Peak FCC 8436 Mon Jun 7 12:25:08 UTC 2021
Peak RET 0 Never
Peak Total 8436 Mon Jun 7 12:25:08 UTC 2021
Sessions Time
Peak FCC 1 Mon Jun 7 12:25:08 UTC 2021
Peak RET 0 Never
Peak Total 1 Mon Jun 7 12:25:08 UTC 2021
-------------------------------------------------------------------------------
ESA-VM 7/1 Summary lifetime
BW (Kbps) Time
Peak FCC 8658 Mon Jun 7 13:14:10 UTC 2021
Peak RET 0 Never
Peak Total 8658 Mon Jun 7 13:14:10 UTC 2021
Sessions Time
Peak FCC 1 Mon Jun 7 12:25:08 UTC 2021
Peak RET 0 Never
Peak Total 1 Mon Jun 7 12:25:08 UTC 2021
-------------------------------------------------------------------------------
Video-groups : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
view
view
Syntax
view [view-name] [detail]
Context
[Tree] (show>system>security view)
Full Context
show system security view
Description
This command lists one or all views and permissions in the MIB-OID tree.
Parameters
- view-name
Specifies the name of the view to display output. If no view name is specified, the complete list of views displays.
- detail
Displays detailed view information.
Platforms
All
Output
The following is an example of system security views.
Show System Security View Output Fields describes system security view output fields.
Sample OutputA:ALA-1# show system security view
===============================================================================
Views
===============================================================================
view name oid tree mask permission
-------------------------------------------------------------------------------
iso 1 included
no-security 1 included
no-security 1.3.6.1.6.3 excluded
no-security 1.3.6.1.6.3.10.2.1 included
no-security 1.3.6.1.6.3.11.2.1 included
no-security 1.3.6.1.6.3.15.1.1 included
-------------------------------------------------------------------------------
No. of Views: 6
===============================================================================
A:ALA-1#
A:ALA-1# show system security view no-security detail
===============================================================================
Views
===============================================================================
view name oid tree mask permission
-------------------------------------------------------------------------------
no-security 1 included
no-security 1.3.6.1.6.3 excluded
no-security 1.3.6.1.6.3.10.2.1 included
no-security 1.3.6.1.6.3.11.2.1 included
no-security 1.3.6.1.6.3.15.1.1 included
-------------------------------------------------------------------------------
No. of Views: 5
===============================================================================
=======================================
no-security used in
=======================================
group name
---------------------------------------
snmp-ro
snmp-rw
=======================================
A:ALA-1#
Label |
Description |
|---|---|
View name |
Displays the name of the view. Views control the accessibility of a MIB object within the configured MIB view and subtree. |
OID tree |
Displays the Object Identifier (OID) value. OIDs uniquely identify MIB objects in the subtree. |
Mask |
Displays the mask value and the mask type, along with the oid-value configured in the view command, determines the access of each sub-identifier of an object identifier (MIB subtree) in the view. |
Permission |
Included — Specifies to include MIB subtree objects. Excluded — Specifies to exclude MIB subtree objects. |
No. of Views |
Displays the total number of configured views. |
Group name |
Displays the access group name. |
violators
violators
Syntax
violators [port] [interface] [sap] [ video] [sdp]
Context
[Tree] (show>system>security>cpu-protection violators)
Full Context
show system security cpu-protection violators
Description
This command displays all interfaces, ports or SAPs with CPU protection policy violators. It also includes objects (SAPs, interfaces) that exceed the out-profile-rate and have the log-events keyword enabled for the out-profile-rate in the cpu-protection policy associated with the object.
Parameters
- port
Displays violators associated with the port.
- interface
Displays violators associated with the interface.
- sap
Displays violators associated with the SAP.
- video
Displays violators associated with the video entity.
- sdp
Displays violators associated with the SDP.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS
Output
The following is an example of CPU protection violators information.
Sample Output*A:SecuritySR7>config>sys>security>cpu-protection>policy# show system security
cpu-protection violators
===============================================================================
Ports where a rate limit is violated
===============================================================================
Port-Id
Type Limit First-Time Last-Time Violation-Periods
-------------------------------------------------------------------------------
No ports found
===============================================================================
Interfaces where the protection policy overall rate limit is violated
===============================================================================
Interface-Name Router-Name
Plcy Limit First-Time Last-Time Violation-Periods
-------------------------------------------------------------------------------
toIxia Base
255 1000 10/02/2012 18:38:23 10/02/2012 18:39:31 70
-------------------------------------------------------------------------------
1 interface(s) found
===============================================================================
SAP's where the protection policy overall rate limit is violated
===============================================================================
SAP-Id Service-Id
Plcy Limit First-Time Last-Time Violation-Periods
-------------------------------------------------------------------------------
No SAP's found
===============================================================================
SDP's where the protection policy overall rate limit is violated
===============================================================================
SDP-Id Service-Id
Plcy Limit First-Time Last-Time Violation-Periods
-------------------------------------------------------------------------------
No SDP's found
===============================================================================
Video clients where the protection policy per-source rate limit is violated
===============================================================================
Client IP Address Video-Interface Service-Id
Plcy Limit First-Time Last-Time Violation-Periods
-------------------------------------------------------------------------------
No clients found
===============================================================================
violators
Syntax
violators [port] [interface] [sap]
Context
[Tree] (clear>cpu-protection violators)
Full Context
clear cpu-protection violators
Description
This command clears the rate limit violator record.
Parameters
- port
Clears entries for ports.
- interface
Clears entries for interfaces.
- sap
Clears entries for SAPs.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS
violators
Syntax
violators enforcement {sap | interface} card slot-number [fp fp-number]
violators local-monitor {sap | interface} card slot-number [fp fp-number]
Context
[Tree] (tools>dump>security>dist-cpu-protection violators)
Full Context
tools dump security dist-cpu-protection violators
Description
This command shows the nonconforming enforcement policers and local monitors.
Parameters
- sap
-Indicates to display the violators associated with SAPs
- interface
- Indicates to display the violators associated with router interfaces.
- enforcement
Shows exceed and hold-down for Static and Dynamic Policers.
- local-monitor
Shows state of dynamic policer allocation for Local Monitoring Policers.
- card slot-number
The physical slot number for the card.
- fp fp-number
Identifies the instance of the FP (FastPath) chipset. Some cards have a single FP and some cards can contain multiple FPs (for example, an XCM can house multiple FPs via its two XMAs).
Platforms
All
Output
Users Output
Output Parameters describes show users output fields.
Sample Output*A:Dut-A# tools dump security dist-cpu-protection violators enforcement interface
card 4 fp 1
===============================================================================
Distributed Cpu Protection Current Interface Enforcer Policer Violators
===============================================================================
Interface Policer/Protocol Hld Rem
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Violators on Slot-4 Fp-1
-------------------------------------------------------------------------------
test staticArpPolicer [S] none
test icmp [D] none
test ospf [D] none
-------------------------------------------------------------------------------
[S]-Static [D]-Dynamic [M]-Monitor
-------------------------------------------------------------------------------
===============================================================================
Label |
Description |
|---|---|
Interface |
The name of the router interface |
Policer/Protocol |
The configured name of the static policer (indicated with an [S]) or the DCP protocol name for a dynamic policer (indicated with a [D]). |
[S] / [D] |
indicates a static vs dynamic policer |
Hld Rem |
The remaining time in the hold-down countdown during which a policer is treating all packets as exceeding. |
virtual
virtual
Syntax
virtual
Context
[Tree] (show>card virtual)
Full Context
show card virtual
Description
Commands in this context display virtual card information.
Platforms
VSR
virtual
Syntax
virtual
Context
[Tree] (clear>card virtual)
Full Context
clear card virtual
Description
Commands in this context clear virtual card statistics.
Platforms
VSR
virtual-link
virtual-link
Syntax
virtual-link [detail]
virtual-link database [detail]
Context
[Tree] (show>router>ospf virtual-link)
Full Context
show router ospf virtual-link
Description
This command displays information for OSPF virtual links.
Parameters
- database
Displays the virtual link database.
- detail
Displays operational and statistical information about virtual links associated with this router.
Platforms
All
Output
The following output is an example of OSPF virtual link information, and OSPF Virtual Link Output Fields describes the output fields.
Sample Outputshow router ospf virtual-link detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Virtual Links (detail)
===============================================================================
-------------------------------------------------------------------------------
Neighbor Router Id : 10.0.0.3
-------------------------------------------------------------------------------
Nbr Router Id : 10.0.0.3 Area Id : 0.0.0.1
Local Interface: 1.2.3.2
Metric : 10
State : Point To Point Admin State : Up
Hello Intrvl : 10 sec Rtr Dead Intrvl: 60 sec
Tot Rx Packets : 10 Tot Tx Packets : 10
Rx Hellos : 1 Tx Hellos : 2
Rx DBDs : 2 Tx DBDs : 3
Rx LSRs : 1 Tx LSRs : 1
Rx LSUs : 4 Tx LSUs : 3
Rx LS Acks : 2 Tx LS Acks : 1
Discards : 0 Tx Failures : 0
Retransmits : 0
Bad Networks : 0 Bad Versions : 0
Bad Areas : 0 Bad Dest Addrs : 0
Bad Auth Types : 0 Auth Failures : 0
Bad Neighbors : 0 Bad Pkt Types : 0
Bad Lengths : 0 Bad Hello Int. : 0
Bad Dead Int. : 0 Bad Options : 0
Retrans Intrvl : 5 sec Transit Delay : 1 sec
Last Event : 08/12/2021 12:56:23 Authentication : None
IPsec In Sta SA: IPsec Out Sta *:
IPsec In Sta S*:
LSA Count : 0 LSA Checksum : 0x0
===============================================================================
Label |
Description |
|---|---|
Nbr Rtr ID |
The router ID(s) of neighboring routers. |
Area Id |
A 32-bit integer which identifies an area. |
Local Interface |
The IP address of the local egress interface used to maintain the adjacency to reach this virtual neighbor. |
Metric |
The metric value associated with the route. This value is used when importing this static route into other protocols. When the metric is configured as zero, the metric configured in OSPF, default-import-metric, applies. This value is also used to determine the static route installed in the forwarding table. |
State |
The operational state of the virtual link to the neighboring router. |
Authentication |
Specifies whether authentication is enabled for the interface or virtual link. |
Hello Intrval |
Specifies the length of time, in seconds, between the Hello packets that the router sends on the interface. |
Rtr Dead Intrvl |
Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was enabled. |
Tot Rx Packets |
Specifies the total number of OSPF packets received on this interface since the OSPF admin status was enabled. |
Rx Hellos |
Specifies the total number of OSPF Hello packets received on this interface since the OSPF admin status was enabled. |
Rx DBDs |
Specifies the total number of OSPF Database Description packets received on this interface since the OSPF administrative status was enabled. |
Rx LSRs |
Specifies the total number of Link State Requests (LSRs) received on this interface since the OSPF admin status was enabled. |
Rx LSUs |
Specifies the total number of Link State Updates (LSUs) received on this interface since the OSPF admin status was enabled. |
Rx LS Acks |
Specifies the total number of Link State Acknowledgments received on this interface since the OSPF admin status was enabled. |
Tot Tx Packets |
Specifies the total number of OSPF packets transmitted on this virtual interface since it was created. |
Tx Hellos |
Specifies the total number of OSPF Hello packets transmitted on this virtual interface since it was created. |
Tx DBDs |
Specifies the total number of OSPF database description packets transmitted on this virtual interface. |
Tx LSRs |
Specifies the total number of OSPF Link State Requests (LSRs) transmitted on this virtual interface. |
Tx LSUs |
Specifies the total number of OSPF Hello packets transmitted on this interface since the OSPF admin status was enabled. |
Tx LS Acks |
Specifies the total number of OSPF Link State Acknowledgments (LSA) transmitted on this virtual interface. |
Retransmits |
Specifies the total number of OSPF retransmits sent on this interface since the OSPF admin status was last enabled. |
Discards |
Specifies the total number of OSPF packets discarded on this interface since the OSPF admin status was last enabled. |
Bad Networks |
Specifies the total number of OSPF packets received with invalid network or mask since the OSPF admin status was last enabled. |
Bad Versions |
Specifies the total number of OSPF packets received with bad OSPF version numbers since the OSPF admin status was last enabled. |
Bad Areas |
Specifies the total number of OSPF packets received with an area mismatch since the OSPF admin status was last enabled. |
Bad Dest Addrs |
Specifies the total number of OSPF packets received with the incorrect IP destination address since the OSPF admin status was last enabled. |
Bad Auth Types |
Specifies the total number of OSPF packets received with an invalid authorization type since the OSPF admin status was last enabled. |
Auth Failures |
Specifies the total number of OSPF packets received with an invalid authorization key since the OSPF admin status was last enabled. |
Bad Neighbors |
Specifies the total number of OSPF packets received where the neighbor information does not match the information this router has for the neighbor since the OSPF admin status was last enabled. |
Bad Pkt Types |
Specifies the total number of OSPF packets received with an invalid OSPF packet type since the OSPF admin status was last enabled. |
Bad Lengths |
Specifies the total number of OSPF packets received on this interface with a total length not equal to the length given in the packet itself since the OSPF admin status was last enabled. |
Bad Hello Int. |
Specifies the total number of OSPF packets received where the hello interval given in packet was not equal to that configured on this interface since the OSPF admin status was last enabled. |
Bad Dead Int. |
Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was last enabled. |
Bad Options |
Specifies the total number of OSPF packets received with an option that does not match those configured for this interface or area since the OSPF admin status was last enabled. |
Retrans Intrvl |
Specifies the length of time, in seconds, that OSPF waits before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. |
Transit Delay |
Specifies the time, in seconds, it takes to transmit a link state advertisement (LSA) on the interface or virtual link. |
Last Event |
Specifies the date and time when an event was last associated with this OSPF interface. |
Tx Failures |
Transmitted OSPF packets that are dropped due to resource shortage. |
virtual-link
Syntax
virtual-link [detail]
virtual-link [detail] database
Context
[Tree] (show>router>ospf3 virtual-link)
Full Context
show router ospf3 virtual-link
Description
This command displays information for OSPFv3 virtual links.
Parameters
- database
Displays the virtual link database.
- detail
Displays operational and statistical information about virtual links associated with this router.
Platforms
All
Output
The following output is an example of OSPFv3 virtual link information, and OSPF Virtual Link Output Fields describes the output fields.
Sample Outputshow router ospf3 virtual-link detail
===============================================================================
Rtr Base OSPFv3 Instance 0 Virtual Links (detail)
===============================================================================
-------------------------------------------------------------------------------
Neighbor Router Id : 10.0.0.2
-------------------------------------------------------------------------------
Nbr Router Id : 10.0.0.2 Area Id : 0.0.0.1
Local Interface: 3ffe::101:201
Metric : 10
State : Point To Point Admin State : Up
Hello Intrvl : 10 sec Rtr Dead Intrvl: 60 sec
Tot Rx Packets : 42 Tot Tx Packets : 15
Rx Hellos : 29 Tx Hellos : 3
Rx DBDs : 2 Tx DBDs : 3
Rx LSRs : 1 Tx LSRs : 1
Rx LSUs : 7 Tx LSUs : 6
Rx LS Acks : 3 Tx LS Acks : 2
Discards : 0 Tx Failures : 0
Retransmits : 1
Bad Networks : 0 Bad Versions : 0
Bad Areas : 0 Bad Dest Addrs : 0
Bad Auth Types : 0 Auth Failures : 0
Bad Neighbors : 0 Bad Pkt Types : 0
Bad Lengths : 0 Bad Hello Int. : 0
Bad Dead Int. : 0 Bad Options : 0
Retrans Intrvl : 5 sec Transit Delay : 1 sec
Last Event : 08/12/2021 12:58:28 Authentication : None
IPsec In Sta SA: IPsec Out Sta *:
IPsec In Sta S*:
LSA Count : 0 LSA Checksum : 0x0
===============================================================================
Label |
Description |
|---|---|
Nbr Rtr ID |
The router ID(s) of neighboring routers. |
Area Id |
A 32-bit integer which identifies an area. |
Local Interface |
The IP address of the local egress interface used to maintain the adjacency to reach this virtual neighbor. |
Metric |
The metric value associated with the route. This value is used when importing this static route into other protocols. When the metric is configured as zero, the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table. |
State |
The operational state of the virtual link to the neighboring router. |
Authentication |
Specifies whether authentication is enabled for the interface or virtual link. |
Hello Intrval |
Specifies the length of time, in seconds, between the Hello packets that the router sends on the interface. |
Rtr Dead Intrvl |
Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was enabled. |
Tot Rx Packets |
Specifies the total number of OSPF packets received on this interface since the OSPF admin status was enabled. |
Rx Hellos |
Specifies the total number of OSPF Hello packets received on this interface since the OSPF admin status was enabled. |
Rx DBDs |
Specifies the total number of OSPF Database Description packets received on this interface since the OSPF administrative status was enabled. |
Rx LSRs |
Specifies the total number of Link State Requests (LSRs) received on this interface since the OSPF admin status was enabled. |
Rx LSUs |
Specifies the total number of Link State Updates (LSUs) received on this interface since the OSPF admin status was enabled. |
Rx LS Acks |
Specifies the total number of Link State Acknowledgments received on this interface since the OSPF admin status was enabled. |
Tot Tx Packets |
Specifies the total number of OSPF packets transmitted on this virtual interface since it was created. |
Tx Hellos |
Specifies the total number of OSPF Hello packets transmitted on this virtual interface since it was created. |
Tx DBDs |
Specifies the total number of OSPF database description packets transmitted on this virtual interface. |
Tx LSRs |
Specifies the total number of OSPF Link State Requests (LSRs) transmitted on this virtual interface. |
Tx LSUs |
Specifies the total number of OSPF Hello packets transmitted on this interface since the OSPF admin status was enabled. |
Tx LS Acks |
Specifies the total number of OSPF Link State Acknowledgments (LSA) transmitted on this virtual interface. |
Retransmits |
Specifies the total number of OSPF retransmits sent on this interface since the OSPF admin status was last enabled. |
Discards |
Specifies the total number of OSPF packets discarded on this interface since the OSPF admin status was last enabled. |
Bad Networks |
Specifies the total number of OSPF packets received with invalid network or mask since the OSPF admin status was last enabled. |
Bad Versions |
Specifies the total number of OSPF packets received with bad OSPF version numbers since the OSPF admin status was last enabled. |
Bad Areas |
Specifies the total number of OSPF packets received with an area mismatch since the OSPF admin status was last enabled. |
Bad Dest Addrs |
Specifies the total number of OSPF packets received with the incorrect IP destination address since the OSPF admin status was last enabled. |
Bad Auth Types |
Specifies the total number of OSPF packets received with an invalid authorization type since the OSPF admin status was last enabled. |
Auth Failures |
Specifies the total number of OSPF packets received with an invalid authorization key since the OSPF admin status was last enabled. |
Bad Neighbors |
Specifies the total number of OSPF packets received where the neighbor information does not match the information this router has for the neighbor since the OSPF admin status was last enabled. |
Bad Pkt Types |
Specifies the total number of OSPF packets received with an invalid OSPF packet type since the OSPF admin status was last enabled. |
Bad Lengths |
Specifies the total number of OSPF packets received on this interface with a total length not equal to the length given in the packet itself since the OSPF admin status was last enabled. |
Bad Hello Int. |
Specifies the total number of OSPF packets received where the hello interval given in packet was not equal to that configured on this interface since the OSPF admin status was last enabled. |
Bad Dead Int. |
Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was last enabled. |
Bad Options |
Specifies the total number of OSPF packets received with an option that does not match those configured for this interface or area since the OSPF admin status was last enabled. |
Retrans Intrvl |
Specifies the length of time, in seconds, that OSPF waits before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor. |
Transit Delay |
Specifies the time, in seconds, it takes to transmit a link state advertisement (LSA) on the interface or virtual link. |
Last Event |
Specifies the date and time when an event was last associated with this OSPF interface. |
Tx Failures |
Transmitted OSPF packets that are dropped due to resource shortage. |
virtual-link
Syntax
virtual-link nbr-rtr-id area area-id [interval seconds] [repeat repeat] [ absolute | rate]
Context
[Tree] (monitor>router>ospf virtual-link)
[Tree] (monitor>router>ospf3 virtual-link)
Full Context
monitor router ospf virtual-link
monitor router ospf3 virtual-link
Description
This command displays statistical OSPF virtual link information at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified neighbor(s). The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Parameters
- nbr-rtr-id
Specifies the IP address to uniquely identify a neighboring router in the autonomous system.
- area-id
Specifies the OSPF area ID, expressed in dotted decimal notation or as a 32-bit decimal integer.
- seconds
Configures the interval for each display, in seconds.
- repeat
Configures how many times the command is repeated.
- absolute
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
Displays rate-per-second for each statistic instead of the delta.
Platforms
All
virtual-neighbor
virtual-neighbor
Syntax
virtual-neighbor [remote ip-address] [ detail]
Context
[Tree] (show>router>ospf virtual-neighbor)
[Tree] (show>router>ospf3 virtual-neighbor)
Full Context
show router ospf virtual-neighbor
show router ospf3 virtual-neighbor
Description
This command displays virtual neighbor information.
Parameters
- remote ip-address
Displays the specified IPv4 or IPv6 address. This reduces the amount of output displayed.
- detail
Produces detailed information on the virtual neighbor. This option produces a large amount of data. It is recommended to use detail only when requesting information for a specific neighbor.
Platforms
All
Output
OSPF Virtual Neighbor Output
OSPF Virtual Neighbor Output Fields describes OSPF virtual neighbor output fields.
Label |
Description |
|---|---|
Nbr IP Addr |
The IP address this neighbor is using in its IP source address. On addressless links, this will not be 0.0.0.0, but the address of another of the neighbor's interfaces. |
Nbr Rtr ID |
Specifies the router ID(s) of neighboring routers. |
Transit Area |
Specifies the transit area ID that links the backbone area with the area that has no physical connection with the backbone. |
Retrans Q Length |
The current length of the retransmission queue. |
No. of Neighbors |
Specifies the total number of OSPF neighbors adjacent on this interface, in a state of INIT or greater, since the OSPF admin status was enabled. |
Nbr State |
Specifies the operational state of the virtual link to the neighboring router. |
Options |
Specifies the total number of OSPF packets received with an option that does not match those configured for this virtual interface or transit area since the OSPF admin status was enabled. |
Events |
Specifies the total number of events that have occurred since the OSPF admin status was enabled. |
Last Event Time |
Specifies the date and time when an event was last associated with this OSPF interface. |
Up Time |
Specifies the uninterrupted time, in hundredths of seconds, the adjacency to this neighbor has been up. |
Time Before Dead |
Specifies the amount of time, in seconds, until the dead router interval expires. |
Bad Nbr States |
Specifies the total number of OSPF packets received where the neighbor information does not match the information this router has for the neighbor since the OSPF admin status was last enabled. |
LSA Inst fails |
Specifies the total number of times an LSA could not be installed into the LSDB due to a resource allocation issue since the OSPF admin status was last enabled. |
Bad Seq Nums |
Specifies the total number of times when a database description packet was received with a sequence number mismatch since the OSPF admin status was last enabled. |
Bad MTUs |
Specifies the total number of times when the MTU in a received database description packet was larger than the MTU of the receiving interface since the OSPF admin status was enabled. |
Bad Packets |
Specifies the total number of times when an LS update was received with an illegal LS type or an option mismatch since the OSPF admin status was enabled. |
LSA not in LSDB |
Specifies the total number of times when an LS request was received for an LSA not installed in the LSDB of this router since the OSPF admin status was enabled. |
Option Mismatches |
Specifies the total number of times when a LS update was received with an option mismatch since the OSPF admin status was enabled. |
Nbr Duplicates |
Specifies the total number of times when a duplicate database description packet was received during the Exchange state since the OSPF admin status was enabled. |
A:ALA-A# show router ospf 1 virtual-neighbor
===============================================================================
Rtr Base OSPFv2 Instance 1 Virtual Neighbors
===============================================================================
Nbr IP Addr Nbr Rtr Id Nbr State Transit Area RetxQ Len Dead Time
-------------------------------------------------------------------------------
180.1.6.10 180.0.0.10 Full 0.0.0.1 0 58
180.2.9.10 180.0.0.10 Full 0.0.0.2 0 52
-------------------------------------------------------------------------------
No. of Neighbors: 2
===============================================================================
A:ALA-A#
A:ALA-A# show router ospf virtual-neighbor detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Virtual Neighbors (detail)
===============================================================================
Virtual Neighbor Router Id : 180.0.0.10
-------------------------------------------------------------------------------
Neighbor IP Addr : 180.1.6.10 Neighbor Rtr Id : 180.0.0.10
Neighbor State : Full Transit Area : 0.0.0.1
Retrans Q Length : 0 Options : -E--
Events : 4 Last Event Time : 11/07/2006 17:11:56
Up Time : 2d 17:47:17 Time Before Dead : 57 sec
Bad Nbr States : 1 LSA Inst fails : 0
Bad Seq Nums : 0 Bad MTUs : 0
Bad Packets : 0 LSA not in LSDB : 0
Option Mismatches: 0 Nbr Duplicates : 0
-------------------------------------------------------------------------------
Virtual Neighbor Router Id : 180.0.0.10
-------------------------------------------------------------------------------
Neighbor IP Addr : 180.2.9.10 Neighbor Rtr Id : 180.0.0.10
Neighbor State : Full Transit Area : 0.0.0.2
Retrans Q Length : 0 Options : -E--
Events : 4 Last Event Time : 11/07/2006 17:11:59
Up Time : 2d 17:47:14 Time Before Dead : 59 sec
Bad Nbr States : 1 LSA Inst fails : 0
Bad Seq Nums : 0 Bad MTUs : 0
Bad Packets : 0 LSA not in LSDB : 0
Option Mismatches: 0 Nbr Duplicates : 0
===============================================================================
A:ALA-A#
virtual-neighbor
Syntax
virtual-neighbor nbr-rtr-id area area-id [ interval seconds] [repeat repeat] [ absolute | rate]
Context
[Tree] (monitor>router>ospf virtual-neighbor)
[Tree] (monitor>router>ospf3 virtual-neighbor)
Full Context
monitor router ospf virtual-neighbor
monitor router ospf3 virtual-neighbor
Description
This command displays statistical OSPF virtual neighbor information at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified OSPF virtual neighbor router. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Parameters
- nbr-rtr-id
Specifies the IP address to uniquely identify a neighboring router in the autonomous system.
- area-id
Specifies the OSPF area ID, expressed in dotted decimal notation or as a 32-bit decimal integer.
- seconds
Configures the interval for each display, in seconds.
- repeat
Configures how many times the command is repeated.
- absolute
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
Displays rate-per-second for each statistic instead of the delta.
Platforms
All
virtual-subnet
virtual-subnet
Syntax
virtual-subnet subscriber sub-ident
virtual-subnet [sap sap-id]
Context
[Tree] (show>service>id virtual-subnet)
Full Context
show service id virtual-subnet
Description
This command displays currently recorded default gateway and subnets for all virtual subnets enabled for DHCPv4 hosts in the specified service.
Parameters
- sub-ident
Displays information relating to the specified subscriber ID.
- sap-id
Displays information relating to the specified SAP ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of virtual subnet information.
Sample Outputshow service id 500 virtual-subnet
===============================================================================
Virtual subnets in service 500
===============================================================================
Subscriber : 00:20:fc:1e:cd:52|1/1/9:200
-------------------------------------------------------------------------------
Default router : 192.168.100.254
Subnet : 192.168.100.0/24
SAP : 1/1/9:200
-------------------------------------------------------------------------------
No. of subnets: 1
===============================================================================
Virtual Subnet Field Descriptions describes virtual subnet output fields.
Field |
Descriptions |
|---|---|
Subscriber |
The service identification that identifies the service in the service domain |
Default router |
The IP address of the default router received from either the DHCP or the RADIUS server |
Subnet |
The IP address of the subnet |
SAP |
The SAP associated with the service |
No. of subnets |
The total number of subnets for the service |
vpls-fdb-stats
vpls-fdb-stats
Syntax
vpls-fdb-stats [clear]
Context
[Tree] (tools>dump>service vpls-fdb-stats)
Full Context
tools dump service vpls-fdb-stats
Description
This command provides the VPLS FDB statistics for all services.
Platforms
All
Output
Sample Output*A:PE1# tools dump service vpls-fdb-stats
Service Manager VPLS FDB info at 01/31/2017 08:44:40:
Statistics last cleared at 01/31/2017 07:42:25
Statistic | Count
--------------------------+-------------
FdbEntriesInUse | 8
TotalFdbEntries | 511999
FdbMimDestIdxInUse | 0
TotalFdbMimDestIdxEntries | 32767
FdbIsidIdxInUse | 0
TotalFdbMimIsidIdxEntries | 191999
MacAddMsgs | 38
MacDeleteMsgs | 0
MacQueryMsgs | 0
UnknownMsgs | 0
MalformedMsgs | 0
FailedMsgs | 0
FdbHwTableFull | 0
FdbHwLimitExceeded | 0
FdbTableFull | 0
FdbLimitExceeded | 0
FdbMimDestIdxExhausted | 0
MacAddReqs | 30
DupMacAddReqs | 19
DroppedMacAddReqs | 0
FailedMacAddReqs | 19
MacDelReqs | 0
DupMacDelReqs | 0
DroppedMacDelReqs | 0
FailedMacDelReqs | 0
FailedMacCmplxMapUpdts | 0
RvplsFdbEntriesAllocated | 0
RvplsFdbEntriesInUse | 0
EsBmacFdbEntriesAllocated | 0
EsBmacFdbEntriesInUse | 0
*A:PE1#
vpls-sap-template
vpls-sap-template
Syntax
vpls-sap-template
vpls-sap-template template-name
Context
[Tree] (show>service>template vpls-sap-template)
Full Context
show service template vpls-sap-template
Description
This command displays basic information such as summary, template name, and so on, for all SAP VPLS-templates.
Platforms
All
Output
The following example displays VPLS SAP template information.
Sample OutputA:Dut-C# show service template vpls-sap-template squelch
===============================================================================
SAP template
===============================================================================
Template Saps Last Update
-------------------------------------------------------------------------------
saptemplate 30 07/26/2010 08:39:51
-------------------------------------------------------------------------------
Entries found: 1
===============================================================================
===============================================================================
SAP Template Information
===============================================================================
Template : saptemplate Discard Unkn Src : disabled
MAC Aging : enabled MAC Learning : enabled
BPDU Translation : disabled MAC Address Limit: no limit
L2pt Termination : disabled
STP
Admin Status : up Port Priority : 128
Port Path Cost : 10 Admin Edge : disabled
Link Type : Pt-pt
Auto Edge : enabled Root Guard : disabled
MAC Move
Limit : blockable Limit Level : tertiary
Ingress
QoS Policy : 1 MAC Fltr : n/a
IP Fltr : n/a QoS Sched Pol : n/a
Match QinQ Dot1p Bits: default Shared Q Pol : n/a
IPv6 Fltr : n/a
Use Multi-Pt Shared : disabled Agg Rate Limit : Max
Policer Pol : n/a
Egress
QoS Policy : 1 MAC Fltr : n/a
IP Fltr : n/a QoS Sched Pol : n/a
IPv6 Fltr : n/a QinQ Mark Top : disabled
Agg Rate Limit : Max Policer Pol : n/a
Frame Based Acctg : disabled
CPM Prot Plcy : def CPM Monitor MAC : disabled
Coll Acctg Stats : disabled
ETH-CFM MIP : disabled
ETH-CFM Squelch Level: 0 1 2 3 4 5
===============================================================================
vpls-sap-template-using
vpls-sap-template-using
Syntax
vpls-sap-template-using template-name
Context
[Tree] (show>service>template vpls-sap-template-using)
Full Context
show service template vpls-sap-template-using
Description
This command displays services instantiated using vpls-sap-template.
Platforms
All
Output
The following example displays information about services instantiated using this VPLS template.
Sample OutputA:Dut-C# show service template vpls-sap-template-using "saptemplate"
===============================================================================
SAP template 'saptemplate' created SAPs
===============================================================================
SvcId Sap Creator Svc Vpls Group
-------------------------------------------------------------------------------
1-10 2/1/2:1-2/1/2:10 5000 1
2/2/8:1-2/2/8:10
lag-1:1.*-lag-1:10.*
-------------------------------------------------------------------------------
Entries found: 30
===============================================================================
vpls-template
vpls-template
Syntax
vpls-template
vpls-template template-name
Context
[Tree] (show>service>template vpls-template)
Full Context
show service template vpls-template
Description
This command displays basic information/summary, template name, etc. for all VPLS templates. When a template name is specified, detailed information for the specified template, VPLS parameters, and so on, are displayed.
Platforms
All
Output
The following example displays VPLS template information.
Sample OutputA:Dut-C# show service template vpls-template
===============================================================================
Service template
===============================================================================
Template Services Last Update
-------------------------------------------------------------------------------
test 0 07/26/2010 08:40:01
svctemplate 10 07/26/2010 08:39:51
-------------------------------------------------------------------------------
Entries found: 2
===============================================================================
A:Dut-C# show service template vpls-template "svctemplate"
===============================================================================
Service template Information
===============================================================================
Template : svctemplate
MTU Size : 1514 Customer : 10
MAC Aging : enabled MAC Learning : enabled
Discard Unkn Dest : disabled Temp Flood Time : Disabled
Per Svc Hashing : disabled
FDB
Local Age Time : 300 secs Remote Age Time : 900 secs
High Watermark : 95% Low Watermark : 90%
Table Size : 250
STP
Admin State : disabled Priority : 32768
Bridge Max Age : 20 secs Bridge Hello Time: 2 secs
Bridge Fwd Delay : 15 secs Mode : rstp
Hold Cnt : 6
MAC Move
Rate : 2/sec Retry Timeout : 10 secs
Admin State : disabled Num Retries : 3
Pri-Ports Cumu Factor: 3 Sec Cumu Factor : 2
=================================================================================
vpls-template-using
vpls-template-using
Syntax
vpls-template-using template-name
Context
[Tree] (show>service>template vpls-template-using)
Full Context
show service template vpls-template-using
Description
This command displays services instantiated using the VPLS-template.
Platforms
All
Output
The following example displays service template information.
Sample OutputA:Dut-C# show service template vpls-template-using "svctemplate"
===========================================================================
Service template 'svctemplate' created Services
===========================================================================
SvcId Creator Svc Vpls Group
---------------------------------------------------------------------------
1-10 5000 1
---------------------------------------------------------------------------
Entries found: 10
===========================================================================
vpn-ipv4
vpn-ipv4
Syntax
vpn-ipv4 [aspath-regex reg-exp] [community comm-id] [rd rd] [brief]
vpn-ipv4 [aspath-regex reg-exp] hunt [ community comm-id] [rd rd] [ brief]
vpn-ipv4 [detail | longer] [aspath-regex reg-exp] [community comm-id] [rd rd]
Context
[Tree] (show>router>bgp>routes vpn-ipv4)
Full Context
show router bgp routes vpn-ipv4
Description
This command displays BGP VPN IPv4 routes.
Parameters
- reg-exp
Displays routes matching the specified regular expression, up to 80 characters.
- hunt
Displays entries for the specified route.
- comm-id
Specifies the community ID, up to 72 characters.
- rd
Displays information for the route distinguisher.
- brief
Displays the BGP VPN IPv4 route information in a brief format.
Platforms
All
vpn-ipv6
vpn-ipv6
Syntax
vpn-ipv6 [aspath-regex reg-exp] [community comm-id] [rd rd] [brief]
vpn-ipv6 [aspath-regex reg-exp] hunt [ community comm-id] [rd rd] [ brief]
vpn-ipv6 [detail | longer] [aspath-regex reg-exp] [community comm-id] [rd rd]
Context
[Tree] (show>router>bgp>routes vpn-ipv6)
Full Context
show router bgp routes vpn-ipv6
Description
This command displays BGP VPN IPv6 routes.
Parameters
- reg-exp
Displays routes matching the specified regular expression, up to 80 characters.
- hunt
Displays entries for the specified route.
- comm-id
Specifies the community ID, up to 72 characters.
- rd
Displays information for the route distinguisher.
- brief
Displays the BGP VPN IPv6 route information in a brief format.
Platforms
All
vport
vport
Syntax
vport name [interval seconds] [repeat repeat] [ absolute | rate]
vport name [interval seconds] [repeat repeat] monitor-threshold
Context
[Tree] (monitor>port vport)
Full Context
monitor port vport
Description
This command monitors Vport statistics.
Parameters
- name
Specifies the Vport name, up to 32 characters.
- seconds
Specifies the interval for each display, in seconds.
- repeat
Specifies the number of times the command is repeated.
- absolute
When the absolute keyword is specified, the raw statistics are displayed without processing. No calculations are performed on the delta or rate statistics.
- rate
When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the delta.
- monitor-threshold
Displays the exceed count for the port-scheduler under Vport (if specified) or for a physical port.
Platforms
All
vport
Syntax
vport [name] [statistics | associations] [ monitor-threshold] [port-sched | hw-agg-shaper-sched]
Context
[Tree] (show>port vport)
Full Context
show port vport
Description
This command displays Vport information.
Parameters
- name
Specifies the Vport name, up to 32 characters.
- statistics
Displays the statistics related to the Vport.
- associations
Displays the associations related to the Vport.
- monitor-threshold
Displays the exceed count for the port-scheduler under Vport (if specified) or for a physical port.
- port-sched
Displays the port scheduler policy associated with the Vport.
- hw-agg-shaper-sched
Displays the hardware aggregate shaper scheduler policy associated with the Vport.
Platforms
All
vport
Syntax
vport summary
Context
[Tree] (show>qos vport)
Full Context
show qos vport
Description
This command displays Vport information.
Parameters
- summary
Displays summary information.
Platforms
All
vrf-export-test
vrf-export-test
Syntax
vrf-export-test policy-name [policy-name...{up tp 15 max}] prefix ip-prefix/ip-prefix-length [longer] [ display-rejects] [display-rejects-only] [protocol protocol]
vrf-export-test plcy-or-long-expr [plcy-or-expr [ plcy-or-expr...{up tp 14 max}] prefix ip-prefix/ip-prefix-length [ longer] [display-rejects] [display-rejects-only] [protocol protocol]
Context
[Tree] (show>router vrf-export-test)
Full Context
show router vrf-export-test
Description
This command tests an existing route policy, a chain of route policies, or a route policy logical expression in order to assess its effects as a VRF export policy. This is determined by identifying the routes that would be accepted or rejected after the complete evaluation.
Parameters
- plcy-or-long-expr
Specifies up to 14 policy names or a long expression.
- plcy-or-expr
Specifies the policy name or expression.
- policy-name
Specifies the policy name of an existing configured and committed policy, up to 64 characters.
- longer
Matches prefixes with a longer prefix-length.
- ip-prefix/ip-prefix-length
Specifies an IPv4 or IPv6 prefix/mask to be evaluated. The keyword longer may be specified to evaluate longer prefix matches (optional).
- display-rejects
Displays routes that were rejected by the policy. If not specified, only a count of rejected routes is displayed.
- display-rejects-only
Displays only routes rejected by the policy test.
- protocol
Displays routes by the protocol type.
Platforms
All
Output
Sample Output*A:Dut-B# show router 20 vrf-export-test "test" prefix 0.0.0.0/0 longer protocol direct
===============================================================================
Route Table (Service: 20)
===============================================================================
Accepted by Policy test Entry 1
Dest prefix: 30.30.30.30/32
Protocol : LOCAL
Accepted by Policy test Entry 1
Dest prefix: 40.0.0.0/24
Protocol : LOCAL
Accepted by Policy test Entry 1
Dest prefix: 50.1.0.0/16
Protocol : LOCAL
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 3
===============================================================================
The following table describes the VRF Export Test output fields.
Label |
Description |
|---|---|
Dest prefix |
Displays the destination IPv4 or IPv6 prefix/mask. |
Protocol |
Displays the protocol type. |
vrgw
vrgw
Syntax
vrgw
Context
[Tree] (show>subscr-mgmt vrgw)
Full Context
show subscriber-mgmt vrgw
Description
This command displays Virtual Residential Gateway information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
vrgw
Syntax
vrgw
Context
[Tree] (clear>subscr-mgmt vrgw)
Full Context
clear subscriber-mgmt vrgw
Description
This command clears vRGW data.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
vrgw
Syntax
vrgw
Context
[Tree] (tools>perform>subscr-mgmt vrgw)
Full Context
tools perform subscriber-mgmt vrgw
Description
This command enables tools for controlling vRGWs
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
vrrp
vrrp
Syntax
vrrp
Context
[Tree] (clear vrrp)
Full Context
clear vrrp
Description
Commands in this context clear and reset VRRP entities.
Platforms
All
vrrp
Syntax
vrrp
Context
[Tree] (clear>router vrrp)
Full Context
clear router vrrp
Description
Commands in this context clear and reset VRRP virtual router instances.
Platforms
All
vrrp
Syntax
vrrp
Context
[Tree] (show>router vrrp)
Full Context
show router vrrp
Description
This command displays information VRRP instances.
Platforms
All
vrrp
Syntax
vrrp
Context
[Tree] (show vrrp)
Full Context
show vrrp
Description
Commands in this context display information related to VRRP policies.
Platforms
All
vrrp
Syntax
vrrp
Context
[Tree] (monitor>router vrrp)
Full Context
monitor router vrrp
Description
Commands in this context configure criteria to monitor VRRP statistical information for a VRRP enabled on a specific interface.
Platforms
All
vsd
vsd
Syntax
vsd scripts
vsd domain name
Context
[Tree] (clear>service>statistics vsd)
Full Context
clear service statistics vsd
Description
This command clears VSD related statistics.
Parameters
- scripts
Clears the statistics displayed by the show service vsd script statistics command.
- name
Specifies the VSD domain name, up to 32 characters for which to clear the statistics displayed by the show service vsd domain command.
Platforms
All
vsd
Syntax
vsd
Context
[Tree] (show>service vsd)
Full Context
show service vsd
Description
Commands in this context display VSD parameters.
Platforms
All
vsd
Syntax
vsd [entry]
Context
[Tree] (show>system>xmpp vsd)
[Tree] (show>system vsd)
Full Context
show system xmpp vsd
show system vsd
Description
This command shows the connectivity to the VSD server, including the configured parameters and statistics. When the user provides the entry number of the VSD server, a detailed view for that specific server is shown, including statistics.
Parameters
- entry
Specifies the entry number of the VSD server.
Platforms
All
Output
Sample Output:Dut# show system vsd
==========================================================================
VSD Information
==========================================================================
System Id : SR12U-46-PE
GW Last Audit Tx Time : 03/07/2000 04:07:06
Gateway Publish-Subscribe Information
--------------------------------------------------------------------------
Subscribed : True
Subscriber Name : nuage_gateway_id_SR12U-46-PE
Last Subscription Time : 03/06/2000 05:27:06
==========================================================================
*B:Dut# show system xmpp vsd
==========================================================================
Virtual Services Directory Table
==========================================================================
Id User Name Uptime Status
--------------------------------------------------------------------------
1 cna@vsd1-hy.alu-srpm.us/nua* 0d 22:45:39 Available
--------------------------------------------------------------------------
No. of VSD's: 1
==========================================================================
*B:Dut# show system xmpp vsd 1
==========================================================================
VSD Server Table
==========================================================================
VSD User Name : cna@vsd1-hy.alu-srpm.us/nuage
Uptime : 0d 22:45:41 Status : Available
Msg Tx. : 282 Msg Rx. : 209
Msg Ack. Rx. : 136 Msg Error : 73
Msg TimedOut : 0 Msg MinRtt : 70 ms
Msg MaxRtt : 450 ms
==========================================================================
vsd
Syntax
vsd
Context
[Tree] (tools>perform>service vsd)
Full Context
tools perform service vsd
Description
Commands in this context perform VSD operations.
Platforms
All
vsd-refresh
vsd-refresh
Syntax
vsd-refresh
Context
[Tree] (tools>perform>system>xmpp vsd-refresh)
Full Context
tools perform system xmpp vsd-refresh
Description
This command instructs the system to refresh immediately the list of VSDs and not to wait for the next VSD list audit that the system does periodically.
Platforms
All
vsd-refresh
Syntax
vsd-refresh
Context
[Tree] (tools>perform>system>xmpp vsd-refresh)
Full Context
tools perform system xmpp vsd-refresh
Description
This command performs VSD refresh operations.
Platforms
All
vsd-services
vsd-services
Syntax
vsd-services
Context
[Tree] (tools>dump>service vsd-services)
Full Context
tools dump service vsd-services
Description
Commands in this context dump vsd-services information.
Platforms
All
vxlan
vxlan
Syntax
vxlan [instance vxlan-instance] assisted-replication replicator
vxlan esi esi [instance vxlan-instance]
vxlan instance vxlan-instance oper-flags
vxlan [instance vxlan-instance]
vxlan [instance vxlan-instance] destinations
vxlan detail
Context
[Tree] (show>service>id vxlan)
Full Context
show service id vxlan
Description
This command displays the VXLAN instance parameters. With destinations added, the command shows the VXLAN bindings auto-created or configured in a specified service. The service command can be filtered by VXLAN instance, if the service has more than one instance. A VXLAN binding is composed of the remote (VTEP) and the corresponding egress (VNI) to identify the service at the egress node. The command shows the number of MACs associated to each binding as well as the operational status and if the binding is part of the multicast list. The binding will be operationally down when the VTEP address is not found in the base routing table (the VTEP address cannot be reached). A binding will be part of a multicast list if a valid BGP EVPN inclusive multicast route exists for it.
A VXLAN binding can be associated with the following types of multicast values.
BM — Refers to the capability of the binding to send broadcast or multicast to the remote VTEP. This binding type is setup to AR replicator nodes from a leaf node.
BUM — Refers to the capability of the binding to send broadcast or multicast to the remote VTEP. This binding type is setup to AR replicator nodes from a leaf node.
U — Refers to the capability of the binding to send unknown unicast to the VTEP. This binding type is setup from leaf nodes to other leaf and RNVE nodes.
"-” — Specifies that the binding can only be used for known unicast traffic.
Parameters
- assisted-replication replicator
Displays all the discovered candidate AR replicators for the service and the replicator that has been selected by the leaf to send the BM traffic. The list of replicators is ordered by VTEP address and VNI. This command is only supported on the nodes configured as leaf.
The "In Use” column indicates whether the replicator has been selected for the service. When selecting a replicator for the service, the candidate list is ordered by VTEP IP (lowest IP is ordinal 0) and VNI. A modulo function of the service ID and the number of candidate PEs will give the selected replicator for a specified service.
The "Pending Time” column shows the remaining seconds until the node starts sending the BM traffic to the replicator. This time is configurable by the replicator-activation-time parameter.
For services supporting EVPN multi-homing, the command can also show ES destinations as well as VXLAN bindings. In this case, the output can be filtered by the ESI in order to see the VXLAN destinations that the ES is comprised of.
- instance
Specifies the VXLAN instance.
Platforms
All
Output
Sample OutputA:PE-1# show service id 900 vxlan
===============================================================================
VPLS VXLAN
===============================================================================
Vxlan Src Vtep IP: N/A
===============================================================================
Vxlan Instance
===============================================================================
VXLAN Instance VNI AR Oper-flags VTEP
security
-------------------------------------------------------------------------------
1 900 none none disabled
2 901 none none disabled
-------------------------------------------------------------------------------
Number of Entries : 2
A:PE-1# show service id 900 vxlan instance 1
===============================================================================
VPLS VXLAN, Vxlan Instance: 1, VNI: 900
===============================================================================
Creation Origin: manual
Assisted-Replication: none
RestProtSrcMacAct: none
===============================================================================
VPLS VXLAN service Network Specifics
===============================================================================
-------------------------------------------------------------------------------
Ing Net QoS Policy: none
Ingress FP QGrp : (none) Ing FP QGrp Inst : (none)
VTEP security : disabled MAC Learning : enabled
MAC Aging : enabled Discard Unknown Source : disabled
MAC address limit : 0
====================================================================================
========================================================================
A:PE6# show service id 7000 vxlan assisted-replication replicator
===============================================================================
Vxlan AR Replicator Candidates
===============================================================================
VTEP Address Egress VNI In Use In Candidate List Pending Time
-------------------------------------------------------------------------------
10.4.4.4 7000 yes yes 0
10.5.5.5 7000 no yes 0
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
===============================================================================
A:PE-2# show service id 500 vxlan instance 1 oper-flags
===============================================================================
VPLS VXLAN oper flags
===============================================================================
MhStandby : false
===============================================================================
A:PE-1# show service id 600 vxlan esi 00:23:23:23:23:23:23:00:00:02
===============================================================================
BGP EVPN-VXLAN Ethernet Segment Dest
===============================================================================
Eth SegId Last Change
00:23:23:23:23:23:23:00:00:02 04/10/2018 18:28:04
===============================================================================
===============================================================================
BGP EVPN-VXLAN Dest TEP Info
===============================================================================
TEP Address Egr VNI Last Change
-------------------------------------------------------------------------------
192.0.2.2 600 04/10/2018 18:25:43
192.0.2.3 600 04/10/2018 18:28:04
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
===============================================================================
*A:PE-2# show service id 3001 vxlan destinations
===============================================================================
Egress VTEP, VNI
===============================================================================
Instance VTEP Address Egress VNI EvpnStatic Num
Mcast Oper State L2 PBR SupBcasDom MACs
-------------------------------------------------------------------------------
1 192.0.2.3 3001 evpn 1
BUM Up No No
1 192.0.2.3 3002 evpn 0
M Up No Yes
1 192.0.2.4 3002 evpn 0
M Up No Yes
-------------------------------------------------------------------------------
Number of Egress VTEP, VNI : 3
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN-VXLAN Ethernet Segment Dest
===============================================================================
Instance Eth SegId Num. Macs Last Change
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Show VXLAN Information Fields describes the VXLAN output fields.
Label |
Description |
|---|---|
VXLAN Instance |
Displays the VXLAN instance. |
VNI |
Displays the VNI. |
AR |
Displays the AR. |
Oper-flags |
Displays the operational flags. |
VTEP security |
Displays the VTEP security status (enabled, disabled). |
Number of entries |
Indicates the number of entries. |
Creation Origin |
Displays the creation origin value. |
Assisted-Replication |
Displays the assisted replication value. |
RestProtSrcMacAct |
Displays the RestProtSrcMacAct value. |
Ing Net QoS Policy |
Displays the Ing Net QoS Policy value. |
Ingress FP QGrp |
Displays the Ingress FP QGrp value. |
Ing FP QGrp Inst |
Displays the Ing FP QGrp Inst value. |
MAC Learning |
Displays the MAC learning value. |
MAC Aging |
Displays the MAC aging value. |
Discard Unknown Source |
Displays the discard unknown source value. |
MAC address limit |
Displays the MAC address limit. |
VTEP Address |
Displays the VTEP IP address. |
Egress VNI |
Displays the Egress VNI value. |
In Use |
Displays the In use value. |
In Candidate List |
Displays the In Candidate list value. |
Pending Time |
Displays the Pending time value. |
MhStandby |
Displays the MhStandby flag value. |
Eth SegId |
Displays the Ethernet Segment ID value. |
TEP Address |
Displays the TEP IP address. |
Instance |
Displays the Instance value. |
Evpn/Static |
Displays the Evpn/Static value. |
Num. MACs |
Displays the number of MACs. |
Mcast |
Displays the Mcast value. |
Oper State |
Displays the operational state. |
L2 PBR |
Displays the Layer 2 PBR value. |
Sup BCast Domain |
Displays the Sup BCast Domain value. |
vxlan
Syntax
vxlan [ip-address]
Context
[Tree] (show>service vxlan)
Full Context
show service vxlan
Description
This command displays the VXLAN bindings auto-created in a specified service. A VXLAN binding is composed of the remote VTEP (VXLAN Termination Endpoint) and the corresponding egress VNI (VXLAN Network Identifier) to identify the service at the egress node. The command shows the number of MACs associated to each binding as well as the operational status and if the binding is part of the multicast list. The binding will be operationally down when the VTEP address is not found in the base routing table (the VTEP address cannot be reached). A binding will be part of the multicast list if a valid BGP EVPN inclusive multicast route exists for it.
A VXLAN binding can be associated with the following types of Mcast values.
BM — Refers to the capability of the binding to send Broadcast or Multicast to the remote VTEP. This binding type is setup to AR Replicator nodes from a Leaf node.
BUM — Refers to the capability of the binding to send Broadcast or Multicast to the remote VTEP. This binding type is setup to AR Replicator nodes from a Leaf node.
U — Refers to the capability of the binding to send Unknown Unicast to the VTEP. This binding type is setup from Leaf nodes to other Leaf and RNVE nodes.
"-” — Specifies that the binding can only be used for known unicast traffic.
Parameters
- ip-address
Specifies the remote VTEP address for the VXLAN binding.
Platforms
All
Output
Sample Output===============================================================================
A:PE6# show service vxlan
===============================================================================
VXLAN Tunnel Endpoints (VTEPs)
===============================================================================
VTEP Address Number of Egress VNIs Oper
State
-------------------------------------------------------------------------------
10.2.2.2 1 Up
10.4.4.4 2 Up
10.5.5.5 1 Up
192.0.2.2 1 Up
192.0.2.3 1 Up
192.0.2.4 2 Up
192.0.2.5 2 Up
-------------------------------------------------------------------------------
Number of VTEPs: 7
-------------------------------------------------------------------------------
===============================================================================
A:PE6# show service vxlan 2.2.2.2
===============================================================================
VXLAN Tunnel Endpoint: 2.2.2.2
===============================================================================
Egress VNI Service Id Oper State
-------------------------------------------------------------------------------
4000 4000 Up
-------------------------------------------------------------------------------
===============================================================================
vxlan
Syntax
vxlan
Context
[Tree] (show>service>system vxlan)
Full Context
show service system vxlan
Description
This command shows the global VXLAN configuration in the system. In particular, the command displays the configured assisted-replication IP address and the VXLAN tunnel-termination addresses, if the system terminates VXLAN tunnels in addresses that are not the same as the system IP address.
Platforms
All
Output
Sample OutputA:PE1# show service system vxlan
===============================================================================
System VXLAN Information
===============================================================================
Asstd Repl Ip Address. :
===============================================================================
===============================================================================
Vxlan Tunnel Termination
===============================================================================
Tunnel Term IP FPE ID Last Change
-------------------------------------------------------------------------------
10.11.11.1 1 06/22/2016 14:18:55
-------------------------------------------------------------------------------
Number of Entries: 1
-------------------------------------------------------------------------------
===============================================================================
vxlan
Syntax
vxlan [clear]
Context
[Tree] (tools>dump>service>id vxlan)
Full Context
tools dump service id vxlan
Description
This command displays the number of times a service could not add a VXLAN binding or <VTEP, Egress VNI> due to the following limits:
The per-system VTEP limit has been reached
The per-system <VTEP, Egress VNI> limit has been reached
The per-service <VTEP, Egress VNI> limit has been reached
The per-system Bind limit: Total bind limit or vxlan bind limit has been reached.
Parameters
- clear
Clears the per-system VTEP, per-system VTEP Egress VNI, per-service VTEP Egress VNI, and per-system Bind statistics.
Platforms
All
Output
Sample Output*A:PE63# tools dump service id 3 vxlan
VTEP, Egress VNI Failure statistics at 000 00:03:55.710:
statistics last cleared at 000 00:00:00.000:
Statistic | Count
---------------------------+-------------
VTEP | 0
Service Limit | 0
System Limit | 0
Egress Mcast List Limit | 0
vxlan-instance-using
vxlan-instance-using
Syntax
vxlan-instance-using ethernet-segment [name]
Context
[Tree] (show>service vxlan-instance-using)
Full Context
show service vxlan-instance-using
Description
This command displays the services and VXLAN instances associated with a specified virtual ES, as well as its operational status.
Parameters
- name
Specifies the virtual ES name, up to 32 characters.
Platforms
All
Output
Sample OutputA:PE-2# show service vxlan-instance-using ethernet-segment "vES23"
===============================================================================
VXLAN Ethernet-Segment Information
===============================================================================
SvcId VXLAN Instance Status
-------------------------------------------------------------------------------
500 1 DF
===============================================================================
A:PE-2# show service vxlan-instance-using ethernet-segment
===============================================================================
VXLAN Ethernet-Segment Information
===============================================================================
SvcId VXLAN Instance ES Name Status
-------------------------------------------------------------------------------
500 1 vES23 DF
===============================================================================