Chapter 9: Network configuration procedures

Overview

Purpose

This chapter includes procedures necessary to configure an Alcatel-Lucent 1665 DMXtend network.

Contents

Before you begin

Procedure 9-1: Establish high-speed end-to-end Alcatel-Lucent 1665 DMXtend network

Procedure 9-2: Add new Alcatel-Lucent 1665 DMXtend node to UPSR

Procedure 9-3: Discontinue Alcatel-Lucent 1665 DMXtend node from UPSR

Procedure 9-4: Establish low-speed 1+1 linear optical extension

Procedure 9-5: Establish single-homed network

Procedure 9-6: Establish dual-homed network

Procedure 9-7: Establish subtending low-speed UPSR

Procedure 9-8: Add IP route(s) through network

Procedure 9-9: Establish low-speed 1+1 unprotected optical linear extension

Procedure 9-10: Establish DWDM network

Procedure 9-11: Establish external network-to-network interface (E-NNI)

Procedure 9-12: Establish DWDM OTU2 line