This chapter includes procedures that use the WaveStar® CIT to provision system configuration parameters, for example, miscellaneous discretes, DCC terminations, and timing/synchronization functions for the VLNC2 SYSCTL, VLNC35 Fast Ethernet, and VLNC50/52/55 SONET/SDH Transport circuit packs.
For procedures related to the VLNC40/42/42B, VLNC60/61/62, and VLNC64 circuit packs, and general information about using the Command Line Interface (CLI), refer to Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.
For procedures related to the VLNC40/42/42B, VLNC60/61/62, and VLNC64 circuit packs, and general information about using the Web-based GUI interface, refer to Alcatel-Lucent 1850 Transport Service Switch (TSS-5) CLI User Provisioning Guide.
Procedure 6-1: Provision system configuration parameters
Procedure 6-2: Provision system parameters
Procedure 6-3: Provision miscellaneous discrete inputs and outputs
Procedure 6-4: Provision DCC terminations
Procedure 6-5: Network synchronization provisioning
Procedure 6-6: Provision system alarm configuration
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |