This document provides examples and procedures for provisioning the Alcatel-Lucent 1850 Transport Service Switch 5 (Alcatel-Lucent 1850 TSS-5) CLI-based circuit packs (VLNC4x and VLNC6x). The procedures mainly use the Web GUI.
This document, Alcatel-Lucent 1850 Transport Service Switch (TSS-5) CLI User Provisioning Guide, Issue 2, is issued to include information about the following features introduced in Release 7.2.2.
Added new procedure to support local access control, Procedure 5-12: Provision local access control
Added new procedure to support Forced Laser Shutdown, Procedure 6-7: Configure Forced Laser Shutdown parameter
Added new loopbacks to Procedure 7-2: Operate/release loopback
Updated profile information the PHB profile information in Procedure 9-4: Configure QOS (PHB Profile, OAM PHB Profile and Traffic Descriptor).
Corrected definitions for In Label and Out Label Procedure 9-6.1: Create Tunnel segments and terminated Tunnel AIDs
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) CLI User Provisioning Guide, Issue 1, was issued to provide information about the following significant Release 7.2 features.
VLNC33 100 F 3-Port Optical Fast Ethernet Port Expander circuit pack that adds three optical Fast Ethernet ports to VLNC42B Ethernet Aggregator circuit packs.
SDH support on VLNC55 OC-3/12/48-STM-1/4/16-28DS1/E1-3DS3E3-1G SONET/SDH Transport circuit pack that provides the functionality of the VLNC52 OC-3/OC-12/STM-1/STM-4/28DS1E1/3DS3E3/1G SONET/SDH Transport circuit pack, OC-48/STM-16 interfaces.
OC-3/STM-1/OC-12/STM-4/OC-48/STM-16 multi-rate PTMs are supported on the VLNC55
SDH support on OC-48/STM-16 CWDM pluggable transmission modules.
Improved precision of 1-way loss measurement (LM) performance monitoring data support on VLNC40/42/42B Ethernet Aggregator circuit packs.
Y1731 1-way delay measurement (DM) performance monitoring support on VLNC42/42B Ethernet Aggregator circuit packs.
Transport Multiprotocol Label Switching (T-MPLS) enhanced functionality support on VLNC42B Ethernet Aggregator circuit pack.
Digital Diagnostic Monitoring (DDM) support on all pluggable transmission modules on VLNC33 packs.
SDH synchronization enhancements support on VLNC5x SONET/SDH Transport circuit packs.
Unframed (UF) signal format for E1 interfaces support on VLNC6x circuit packs.
C-VLAN push/pop feature allows a C-VLAN to be popped at ingress, and allows a C-VLAN to be pushed at egress. The C-VLAN is considered to be “service delimiting”. Rather than tunneling the C-VLAN, it is mapped to a selected pseudo-wire.
For your safety, this document contains safety statements. Safety statements are given at points where risks of damage to personnel, equipment, and operation may exist. Failure to follow the directions in a safety statement may result in serious consequences.
This Alcatel-Lucent 1850 Transport Service Switch (TSS-5) CLI User Provisioning Guide is intended primarily for telecommunications technicians and communications network providers.
Procedural information in this document is intended primarily for maintenance, operation, and provisioning personnel responsible for the operation and maintenance of the Alcatel-Lucent 1850 Transport Service Switch 5 (Alcatel-Lucent 1850 TSS-5).
This guide includes procedure chapters and supporting information (for example, safety instructions, provisionable parameters, glossary, and index). Refer to the Contents section to locate specific information.
This document assumes that users have an understanding of the following:
Basic principles of telecommunication transmission
Common telecommunication and system terminology (a glossary is provided in this document to assist you)
Test sets and tools used in the telecommunication industry
Local operations and functional procedures of your company
Personal computer (PC) operation, common PC terminology, and navigational procedures in a windows-style user interface
The following conventions are used in this document.
This font indicates a command.
Example:
ent-user-secu
This font indicates a document reference.
Example:
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Product Information and Planning Guide (document title and 9-digit ordering number)
This font indicates buttons, icons, or menu items.
Example:
Configuration → Equipment
This font indicates window names or special emphasis.
Example:
The Configure Equipment window is displayed.
This font indicates lettering designations on the backplane, shelf, and circuit packs.
Example:
MN/ABN LED and ACO/TST LED simultaneously light for approximately 12 seconds and then extinguish.
This font indicates information that is either output by the system or is displayed on the computer.
Example:
The response will be /* SYSTEM TID: ALU-TSS-5 */.
Blue text indicates hyperlinks (cross-references) to other text in the document or another step in the procedure.
Important messages are displayed as follows:
This is important information.
You will interact with the Alcatel-Lucent 1850 TSS-5 equipped with the VLNC2 SYSCTL and VLNC50/52/55 SONET/SDH Transport circuit packs using a PC and a windows-based graphical user interface (GUI). The GUI is called the (WaveStar® CIT) and permits system-level and VLNC50/52/55 circuit pack/port operations to be performed (for example, administration, provisioning, and fault management).
You will interact with the Alcatel-Lucent 1850 TSS-5 equipped with the VLNC40/42/42B Ethernet Aggregator, VLNC60/61 Circuit Emulator, and/or VLNC64 Circuit Emulation Mini-Hub circuit packs using a PC and the Web GUI interface or Command Line Interface (CLI) messages. The Web GUI and CLI messages permit VLNC4x/VLNC6x circuit pack operations to be performed (for example, administration and provisioning).
Procedures presented in this document expect you to be familiar with the Web GUI and navigation windows. The windows are designed to be straightforward and to contain all information relating to a particular operation. The procedures presented in this document rely on the information provided in the window displays. Therefore, it is imperative that you read all the information provided in a window before continuing an operational function.
For a detailed description of the Command Line Interface (CLI) messages and general information about using the Command Line Interface (CLI), refer to Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.
To find instructions for performing a specific job, first determine the procedure category (for example, acceptance or node turn-up). After determining the procedure category, go to the corresponding procedure chapter and find the procedure in the chapter Contents table.
The procedures in the following chapters contain step-by-step instructions to accomplish a distinct user job:
Some procedures are referenced from multiple procedures to support a job function you are performing. Proceed to a supporting procedure only when it is referred to by another procedure. Supporting procedures are not to be accessed directly except by very experienced personnel.
Perform all steps in a procedure sequentially, unless that step sends you to another step or procedure.
Unless otherwise instructed, if one procedure sends you to another procedure, you must return to the first procedure after you complete the second. After you have completed the first procedure element, you have finished.
If …/Then … columns in a procedure contain only one condition that is true in a table cell under the If … column. Perform the action in the related table cell under the Then … column. Then continue to the next sequential step or as directed by the action under the Then … column.
Sometimes you will be asked to verify that actions have occurred. This may take the form of a formal statement with the expected response. At other times, you will be instructed to merely verify that the action occurred. If the expected response is not observed and a specific trouble-clearing reference is not made, reference the Trouble clearing procedures chapter in the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Maintenance and Trouble-Clearing Guide, to start trouble clearing.
The following table lists the documents included in the Alcatel-Lucent 1850 TSS-5 documentation set.
|
Comcode |
Document Number |
Title |
|---|---|---|
|
NA |
365-372-330 |
WaveStar® CIT |
|
109 757 724 |
365-372-400R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Product Information and Planning Guide |
|
109 757 732 |
365-372-401R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) User Provisioning Guide |
|
109 757 740 |
365-372-402R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Maintenance and Trouble-Clearing Guide |
|
109 757 757 |
365-372-403R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Installation and System Turn-Up Guide |
|
109 757 765 |
365-372-404R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) TL1 Command Guide for MSPP |
|
109 757 773 |
365-372-405R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide |
|
109 757 781 |
365-372-406R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) CLI User Provisioning Guide |
|
109 757 799 |
365-372-407R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) TL1 Command Guide for T-MPLS |
|
NA |
ED8C956-10 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 3.0 - 7.2 Engineering and Ordering Information |
|
NA |
ED8C956-20 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 3.0 - 7.2 Interconnect Information |
|
109 770 735 |
NA |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 7.2.X Customer Release Notes |
|
109 770 743 CD-ROM | ||
|
109 758 318 |
NA |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 7.2.X Customer Documentation (CD-ROM) |
For technical support, contact your local Alcatel-Lucent customer support team. See the Alcatel-Lucent Support web site for contact information.
To order Alcatel-Lucent documents, contact your local sales representative or use Online Customer Support (OLCS).
To comment on this document, go to the Online Comment Form or e-mail your comments to the Comments Hotline.
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |