Chapter 9: Transport - Multi-protocol label switching (T-MPLS)

Overview

Purpose

This section covers requirements pertaining to Transport Multi-Protocol Label Switching (T-MPLS).

Contents

Before you begin

Procedure 9-1: Configure T-MPLS on VLNC42B

Procedure 9-2: Set/view the parameters for the TMPLS global network settings

Procedure 9-3: Enable/Disable TMPLS port

Procedure 9-4: Configure QOS (PHB Profile, OAM PHB Profile and Traffic Descriptor)

Procedure 9-5: Create Layer 2 encapsulation profile (L2ENCAPPROF)

Procedure 9-6: Create Tunnel segments and Tunnel AIDs

Procedure 9-7: Create/Modify Pseudowire segments

Procedure 9-8: Protection

Procedure 9-9: Alarms

Procedure 9-10: Performance monitoring