Chapter 9: Device discovery
Discovering devices using the NFM-P
Using multiple management interfaces
Post-discovery actions on discovered NEs
Configuring SSH security on devices
Mediation and event notification policies
Procedures for device discovery
To enable SNMPv3 management of a device
To enable SNMPv3 management and discover an 1830 VWM device
To configure the AIM mediation and discovery for management of the VSR-I
To enable or disable SNMP streaming on an NE
To verify that SSH2 is enabled on a device
To enable SSH host key persistence on a device
To assign an event notification policy to an NE
To configure a management network
To configure an additional management interface on a main server
To configure an additional management interface on an auxiliary server
To configure a post-discovery action
To enable, disable, or delete a discovery rule
To view the post-discovery action execution status
To manage a post-discovery action failure on an NE
To manage, suspend, or unmanage a device
To associate a device with a discovery rule
To change from SNMPv2 to SNMPv3 management of a device
To switch from non-secure to secure mediation
To specify which management address the NFM-P uses to remanage a device
To rescan the network for a device according to a discovery rule
To partially or fully resynchronize NEs with the NFM-P database
To manually accept a mismatched SSH host key
To view the SSH2 host keys to identify active and mismatched keys