ETH_CFM
dot1agCfmFaultAlarm
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2001 |
Event name | dot1agCfmFaultAlarm |
SNMP notification prefix and OID |
IEEE8021-CFM-MIB.dot1agNotifications.1 |
Default severity |
minor |
Source stream | main |
Message format string |
MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ highest defect is now $dot1agCfmMepHighestPrDefect$ |
Cause | A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP has a persistent defect, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. If a defect with a higher priority is raised after a Fault Alarm has been issued, another Fault Alarm is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the dot1agCfmMepHighestPrDefect variable in the notification: dot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry (dot1agCfmMdTable). dot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (dot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry (dot1agCfmMaCompTable). dot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (dot1agCfmMepTable). Reference: 802.1ag clause 12.14.7.7 |
Effect | N/A |
Recovery | Investigation is required to determine the cause of the MEP alarm. |
tmnxDot1agCfmMepAisStateChanged
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2006 |
Event name | tmnxDot1agCfmMepAisStateChanged |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.5 |
Default severity |
minor |
Source stream | main |
Message format string | MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ |
Cause | The tmnxDot1agCfmMepAisStateChanged notification is generated when a MEP enters or exits an AIS state. |
Effect | N/A |
Recovery | N/A |
tmnxDot1agCfmMepCsfStateChanged
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2009 |
Event name | tmnxDot1agCfmMepCsfStateChanged |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.8 |
Default severity |
minor |
Source stream | main |
Message format string | Possible messages:
|
Cause |
The tmnxDot1agCfmMepCsfStateChanged notification is generated when a MEP enters or exits a CSF state. |
Effect | N/A |
Recovery | N/A |
tmnxDot1agCfmMepDMTestComplete
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2005 |
Event name | tmnxDot1agCfmMepDMTestComplete |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.4 |
Default severity |
minor |
Source stream | main |
Message format string | $tmnxDot1agCfmMepDelayTestType$ test complete on MEP $dot1agCfmMdIndex$/ $dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$: Delay=$tmnxDot1agCfmMepDelayTestDelay$us |
Cause | The tmnxDot1agCfmMepDMTestComplete notification indicates that a One-Way-Delay-Test (OWDT) frame, or a Two-Way-Delay-Test (TWDT) response was received. For an OWDT frame, traps are raised only when a delay threshold of three seconds is exceeded. |
Effect | N/A |
Recovery | N/A |
tmnxDot1agCfmMepEthTestComplete
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2004 |
Event name | tmnxDot1agCfmMepEthTestComplete |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.3 |
Default severity |
minor |
Source stream | main |
Message format string | eth-test complete on MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/ $dot1agCfmMepIdentifier$: Bytes/Failed Bits/CRC Failures=$tmnxDot1agCfmMepCurrByteCount$/$tmnxDot1agCfmMepCurrFailedBits$/ $tmnxDot1agCfmMepCurrCrcFailures$ |
Cause | The tmnxDot1agCfmMepEthTestComplete notification indicates that an eth-test has been issued and results are ready. The tmnxDot1agCfmMepCurrByteCount indicates the number of bytes contained in the frame's Test TLV, and the tmnxDot1agCfmMepCurrFailedBits and tmnxDot1agCfmMepCurrCrcFailures indicate the failure state of the test. A value of Zero (0) for tmnxDot1agCfmMepCurrFailedBits and a value of 'false (2)' for tmnxDot1agCfmMepCurrCrcFailures indicates a successful test. |
Effect | N/A |
Recovery | N/A |
tmnxDot1agCfmMepFcltyFaultClear
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2011 |
Event name | tmnxDot1agCfmMepFcltyFaultClear |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.10 |
Default severity |
warning |
Source stream | main |
Message format string | ETH-CFM MEP facility fault cleared $tmnxDot1agCfmMepFcltyType$ $tmnxDot1agCfmMepFcltyInstance$ |
Cause | The tmnxDot1agCfmMepFcltyFaultClear notification is generated when the associated facility MEP has cleared an event affecting the specific tmnxDot1agCfmMepFcltyType tmnxDot1agCfmMepFcltyInstance combination over which it is configured. |
Effect | This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkUp notification caused by the facility MEP. |
Recovery | N/A |
tmnxDot1agCfmMepFcltyFaultRaise
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2010 |
Event name | tmnxDot1agCfmMepFcltyFaultRaise |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.9 |
Default severity |
warning |
Source stream | main |
Message format string | ETH-CFM MEP facility fault raised $tmnxDot1agCfmMepFcltyType$ $tmnxDot1agCfmMepFcltyInstance$ |
Cause | The tmnxDot1agCfmMepFcltyFaultRaise notification is generated when the associated facility MEP dot1agCfmMepHighestPrDefect has increased. |
Effect | This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkDown notification caused by the failure of the facility MEP. |
Recovery | Follow the recovery for the dot1agCfmFaultAlarm and the related IF-MIB::linkDown caused by the failure of the facility MEP. |
tmnxDot1agCfmMepLbmTestComplete
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2002 |
Event name | tmnxDot1agCfmMepLbmTestComplete |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.1 |
Default severity |
minor |
Source stream | main |
Message format string | loopback test results on MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/ $dot1agCfmMepIdentifier$ for $dot1agCfmMepTransmitLbmDestMacAddress$ are available (MEP admin-name = " $tmnxDot1agCfmMdAdminName$"/"$tmnxDot1agCfmMaNetAdminName$"/$dot1agCfmMepIdentifier$) |
Cause | The tmnxDot1agCfmMepLbmTestComplete notification indicates that a loopback test has been issued and results are ready. |
Effect | N/A |
Recovery | N/A |
tmnxDot1agCfmMepLtmTestComplete
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2003 |
Event name | tmnxDot1agCfmMepLtmTestComplete |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.2 |
Default severity |
minor |
Source stream | main |
Message format string | linktrace test results with sequenceNumber $dot1agCfmMepTransmitLtmSeqNumber$ on MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ are now available (MEP admin-name = " $tmnxDot1agCfmMdAdminName$"/"$tmnxDot1agCfmMaNetAdminName$"/$dot1agCfmMepIdentifier$) |
Cause | The tmnxDot1agCfmMepLtmTestComplete notification indicates that a linktrace test has been issued and results are ready. The dot1agCfmMepTransmitLtmSeqNumber indicates the Transaction Identifier to use to retrieve the Link-trace results. |
Effect | N/A |
Recovery | N/A |
tmnxDot1agCfmMepSLMTestComplete
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2008 |
Event name | tmnxDot1agCfmMepSLMTestComplete |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.7 |
Default severity |
minor |
Source stream | main |
Message format string | SLM $tmnxDot1agCfmMepSlmTestType$ (test-id $tmnxDot1agCfmMepSlmTestId$) completed for remote-mep $tmnxDot1agCfmMepSlmRemoteMepId$ remote MAC $tmnxDot1agCfmMepSlmRemoteMacAddr$ |
Cause | The tmnxDot1agCfmMepSLMTestComplete notification is generated when a one-way or two-way Synthetic Loss Measurement (SLM) test is completed. For one-way SLM test results, tmnxDot1agCfmMepSlmPacketLossOut and tmnxDot1agCfmMepSlmPacketUnack values are fixed at 'zero(0)'. |
Effect | N/A |
Recovery | N/A |
tmnxDot1agCfmMipEvaluation
Property name | Value |
---|---|
Application name |
ETH_CFM |
Event ID | 2007 |
Event name | tmnxDot1agCfmMipEvaluation |
SNMP notification prefix and OID |
TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.6 |
Default severity |
minor |
Source stream | main |
Message format string | Reevaluating MIPs on service $tmnxDot1agCfmNotifySvcId$ due to virtual MEP configuration |
Cause | The tmnxDot1agCfmMipEvaluation notification is generated when a virtual MEP is created or deleted causing MIP reevaluation on the service. On virtual MEP creation, any MIPs in the service will be removed. On virtual MEP deletion, the MIPs are reevaluated. |
Effect | N/A |
Recovery | N/A |