Workflow for map highlighting
Stages
1 | Determine the map type you want to view: |
2 |
View the relationship between objects drawn on the map. |
3 |
Highlight the shortest path between two IP addresses. See To highlight the shortest path between two IP addresses for more information. |
4 |
Highlight the bidirectional shortest path between two IP addresses. See To highlight the bidirectional shortest path between two IP addresses for more information. |
5 |
Highlight the shortest path between two IP addresses and highlight the LFA path. See To highlight the shortest path between two IP addresses and highlight LFA path for more information. |
6 |
Highlight the LFA path. See To highlight the LFA path for more information. |
7 |
Highlight the shortest path between two IP addresses, run a ping, and highlight ping test results. See To highlight the shortest path between two IP addresses, run a ping, and highlight ping test results for more information. |
8 |
Highlight the path for the default route from a source. See To highlight the path for the default route from a source for more information. |
9 |
Highlight PTP clock paths. See To highlight PTP Clock paths for more information. |
10 |
Highlight PTP status. See To highlight PTP status for more information. |
11 |
Create a Source Entry Point between managed PTP peers to an unmanaged PTP peer. See To create a Source Entry Point between Managed PTP Peers to an unmanaged PTP Peer for more information. |
12 |
Highlight PTP peers in a Sync Domain. See To highlight PTP Peers in a Sync Domain for more information. |
13 |
Highlight the constrained shortest path between two IP addresses. See To highlight the constrained shortest path between two IP addresses for more information. |
14 |
Diagnose a CSPF failure by highlighting the links within the specified routing domain that meet or do not meet the specified constraints. See To diagnose a CSPF failure for more information. |
15 |
Highlight the network route between two routers. See To highlight the network route between two routers for more information. |
16 |
Highlight service tunnels. See To highlight service tunnels and To highlight services from the topology map for more information. |
17 |
Highlight services. See To highlight services from the topology map and To highlight services for more information. |
18 |
Highlight composite services. See To highlight composite services for more information. |
19 |
Highlight a VPRN prefix path. See To highlight a VPRN prefix path for more information. |
20 |
Highlight IES IGP links. See To highlight IES IGP links for more information. |
21 |
Highlight historical IP paths. See To highlight historical IP paths for more information. |
22 |
Highlight LSP paths. See To highlight LSP paths for more information. |
23 |
Highlight S2L LSP paths. See To highlight S2L LSP paths for more information. |
24 |
Highlight point-to-multipoint LSPs. See To highlight point-to-multipoint LSPs and To highlight point-to-multipoint LSPs from the topology map contextual menu for more information. |
25 |
Audit highlighted paths, if required. See To perform a highlighted path audit for more information. |
26 |
Manage active highlights, as required. See To manage active highlights on a topology map for more information. |
27 |
View highlights on a flat map. See To view highlights on a flat map for more information. |
28 | Manage info tables.
|
© 2023 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.