|
|
1 |
Enable MPLS-TP on the routing instances of all NEs that are to participate in the MPLS-TP network; see
To enable MPLS-TP on a routing instance .
|
2 |
Create a BFD template policy; see
To configure a BFD template policy .
|
3 |
Configure MPLS-TP on the routing instance; see
To configure MPLS-TP on a routing instance .
|
4 |
Perform one of the following, as required:
-
Create a mesh of MPLS-TP LSPs or an MPLS-TP LSR cross-connect path; see
To create an MPLS-TP LSP or
To create an MPLS-TP LSR cross-connect path .
-
Create a bidirectional MPLS-TP LSP using simplified provisioning; see
To create a bidirectional MPLS-TP LSP .
|
5 |
Create a IP/MPLS service tunnel, if required, and enable MPLS-TP; see
To create an IP/MPLS service tunnel .
|
6 |
Create a spoke SDP binding using an MPLS-TP service tunnel on the following, if required:
|
7 |
Configure static MPLS-TP pseudowires on the following, if required:
|
8 |
Perform the following OAM diagnostic tests on MPLS-TP objects, if required:
|