LMP
tmnxLmpVRtrControlChannelState
Property name | Value |
---|---|
Application name | LMP |
Event ID | 2005 |
Event name | tmnxLmpVRtrControlChannelState |
SNMP notification prefix and OID | TIMETRA-LMP-MIB.tmnxLmpNotification.5 |
Default severity | minor |
Message format string | Control channel $tmnxLmpVRtrCcId$ on peer $tmnxLmpVRtrPeerNodeId$ is $tmnxLmpVRtrCcOperState$. |
Cause | The tmnxLmpVRtrControlChannelState notification is generated when a control channel transitions to or from the 'up (1)' operational state. |
Effect | If no control channels to the peer-node are up, the related TE links cannot be used to set up new GMPLS label-switched paths (LSPs). |
Recovery | Ensure the control channel peer-interface is reachable. |
tmnxLmpVRtrDbLinkPropMismatch
Property name | Value |
---|---|
Application name | LMP |
Event ID | 2003 |
Event name | tmnxLmpVRtrDbLinkPropMismatch |
SNMP notification prefix and OID | TIMETRA-LMP-MIB.tmnxLmpNotification.3 |
Default severity | minor |
Message format string | DB link $tmnxLmpVRtrDbLinkId$ detected property mismatch with remote DB link $tmnxLmpVRtrDbLinkRemoteId$. |
Cause |
The tmnxLmpVRtrDbLinkPropMismatch notification is generated when a DB link property mismatch is detected on the node. This notification is only generated the first time a mismatch is detected. |
Effect | The DB link is operationally down when a mismatch is detected. |
Recovery | Ensure the DB link configuration between the local node and the peer node is consistent. |
tmnxLmpVRtrDbLinkPropMismatchClr
Property name | Value |
---|---|
Application name | LMP |
Event ID | 2004 |
Event name | tmnxLmpVRtrDbLinkPropMismatchClr |
SNMP notification prefix and OID | TIMETRA-LMP-MIB.tmnxLmpNotification.4 |
Default severity | minor |
Message format string | DB link $tmnxLmpVRtrDbLinkId$ cleared property mismatch with remote DB link $tmnxLmpVRtrDbLinkRemoteId$. |
Cause |
The tmnxLmpVRtrDbLinkPropMismatchClr notification is generated when the DB link property mismatch is cleared. |
Effect | The DB link can now service traffic. |
Recovery | There is no recovery required for this notification. |
tmnxLmpVRtrTeLinkPropMismatch
Property name | Value |
---|---|
Application name | LMP |
Event ID | 2001 |
Event name | tmnxLmpVRtrTeLinkPropMismatch |
SNMP notification prefix and OID | TIMETRA-LMP-MIB.tmnxLmpNotification.1 |
Default severity | minor |
Message format string | TE link $tmnxLmpVRtrTeLinkId$ detected property mismatch on peer $tmnxLmpVRtrTeLinkPeerNodeId$ with remote TE link $tmnxLmpVRtrTeLinkRemoteId$. |
Cause | The tmnxLmpVRtrTeLinkPropMismatch notification is generated when a TE link property mismatch is detected on the node. This notification is only generated the first time a mismatch is detected. |
Effect | The TE link is operationally down when a mismatch is detected. |
Recovery | Ensure the TE link configuration between the local node and the peer node is consistent. |
tmnxLmpVRtrTeLinkPropMismatchClr
Property name | Value |
---|---|
Application name | LMP |
Event ID | 2002 |
Event name | tmnxLmpVRtrTeLinkPropMismatchClr |
SNMP notification prefix and OID | TIMETRA-LMP-MIB.tmnxLmpNotification.2 |
Default severity | minor |
Message format string | TE link $tmnxLmpVRtrTeLinkId$ cleared property mismatch on peer $tmnxLmpVRtrTeLinkPeerNodeId$ with remote TE link $tmnxLmpVRtrTeLinkRemoteId$. |
Cause | The tmnxLmpVRtrTeLinkPropMismatchClr notification is generated when a TE link property mismatch is cleared. |
Effect | The TE link can now service traffic. |
Recovery | There is no recovery required for this notification. |
tmnxLmpVRtrTeLinkState
Property name | Value |
---|---|
Application name | LMP |
Event ID | 2006 |
Event name | tmnxLmpVRtrTeLinkState |
SNMP notification prefix and OID | TIMETRA-LMP-MIB.tmnxLmpNotification.6 |
Default severity | minor |
Message format string | TE link $tmnxLmpVRtrTeLinkId$ is $tmnxLmpVRtrTeLinkOperState$. |
Cause |
The tmnxLmpVRtrTeLinkState notification is generated when a TE link's operational state changes. |
Effect | When tmnxLmpVRtrTeLinkOperState is not 'up (1)', no new GMPLS LSPs can be set up using this TE link. |
Recovery | When tmnxLmpVRtrTeLinkOperState is 'degraded (5)', bring up at least one control channel with the relevant peer node. |