Chapter 12: Device object configuration


Working with device objects

Overview

Workflow to manage device objects

Workflow to configure UNP 802.1x at port level for OmniSwitch devices

General device configuration procedures

To create an object

To modify NE properties

To configure NE custom properties

To enable FIPS-140-2

To create an operational group

To configure a 7210 SAS operational group

To enable and configure global Cflowd sampling on an NE

To enable the automatic selection of an RD on an NE

To configure a Service MAC list

To add a span of control to an NE

To configure load balancing

To configure proxy ARP and proxy node discovery for an NE

To configure a node discovery profile on an NE

To enable or disable 802.1X

To configure an exclusive policy editing restriction on an NE

To configure active card alarms on an NE

To configure a TWAMP server

To enable LLDP on an NE

To configure the BFD flap detection interval on an NE

To enable a Q in Q untagged SAP on an NE

To configure DHCPv6 Advertise messages on an NE

To configure Python script protection on an NE

To configure home LAN extension functionality on an NE

To configure ISA service chaining on an NE

To configure optimized HTTP redirects on an NE

To configure sFlow on an NE

To configure ANYsec encryption on an NE

To create a chassis-level PBB configuration

To configure serving network information on an NE

To configure L2TP on an NE

To configure WLAN GW redundancy on an NE

To configure call-trace debug storage on an NE

To configure the RADIUS CoA port on an NE

To configure data persistence on an NE

To configure DNS security extensions

To enable or disable ICMP extensions on a NE

To configure a PPPoE Intermediate Agent on an NE

To create an FPE

To configure satellite file transfer

To create a port template

To configure the Sender-ID TLV of a CFM PDU for an NE

To configure the global EVPN proxy ARP and node discovery on an NE

To configure a no-service loopback port on the 7210 SAS

To configure CFM DMM version 1 interoperability on the 7210 SAS

To configure two WRED slopes on a 7210 SAS

To configure frame-based accounting for QoS policies on a 7210 SAS

To configure the global system resource profile on a 7210 SAS or 7250 IXR

To configure a system resource profile policy for the 7210 SAS-R/T/Mxp, 7210 SAS-S/Sx, or 7210 SAS-S/Sx VC

To configure chassis MAC address on the 7210 SAS-S/Sx VC

To configure port-based scheduling on the 7210 SAS

To configure buffer management for the 7210 SAS

To configure 7210 SAS-R device properties for MVPN

To configure IP fragmentation for 7210 SAS

To configure forwarding path options or resource allocation on a 7250 IXR

To configure policer allocation

To configure watermark settings on a 7705 SAR

To configure QoS ingress aggregate rates on the 7705 SAR-M/ME

To launch an MCT on a Wavence SA NE connected to a 7705 SAR

To start and stop a Webview or Secure Webview session on an OmniSwitch

To configure the dying gasp alarm on an OmniSwitch

To configure shelf craft port IP address on an 1830 VWM device

To configure an Auto-ID range for policies

To enable USB support on a 7250 IXR

To globally enable or disable Packet Byte Offset on a 7250 IXR

To configure GNSS receiver functions on supported IXR and SR NEs

To configure global-level UNP

To configure an UNP at port-level

To configure DHCPv6 snooping on an NE

To configure the log encryption key

Ring group configuration procedures

To create a ring group

To remove a device from a ring group or a ring group

To configure the global sampling rate on an NE