Chapter 10: TDM service provisioning procedures

Overview

Purpose

This chapter includes procedures to provision non-control plane traditional TDM services. For information about provisioning control plane ENNI and edge traffic, refer to Procedure 9-11: Establish external network-to-network interface (E-NNI).

Contents

Before you begin

Procedure 10-1: Establish DS1 or E1 service

Procedure 10-2: Discontinue DS1 or E1 service

Procedure 10-3: Establish DS3 or EC-1 service

Procedure 10-4: Discontinue DS3 or EC-1 service

Procedure 10-5: Make VT1.5 or STS-n cross-connections, single OC-3/OC-12 UPSR configuration

Procedure 10-6: Make Function unit UPSR, hairpin, and Main to Function unit UPSR cross-connections

Procedure 10-7: Make 1+1 (linear extension) cross-connections

Procedure 10-8: Make single-homed cross-connections

Procedure 10-9: Make dual-homed cross-connections

Procedure 10-10: Bridge and roll cross-connections

Procedure 10-11: Establish dual ring interworking (DRI) connections

Procedure 10-12: Provision DS1/DS3 locked cross-connections on a UPSR

Procedure 10-13: Configure LNW20 TMUX/DS3/EC1 applications

Procedure 10-14: Add optical channel (OCH) to DWDM network

Procedure 10-15: Delete optical channel (OCH) from DWDM network

Procedure 10-16: Add SONET/GbE/Data client signals

Procedure 10-17: Delete SONET/GbE/Data client signal