Procedures for shelf object configuration


To configure an 1830 VWM shelf

To configure the device chassis mode

To configure a VWM shelf for a 7210 SAS

To configure dry contact sensors

To configure the IMM card type on a 7210 SAS-R

To configure switch fabric multicast ingress replication rates

To configure IMPM overrides

To enable mixed mode

To configure timing synchronization

To configure the IEEE 1588 PTP clock on a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR

To configure the IEEE 1588 PTP peer of a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR

To configure IEEE 1588 PTP ports on a 7210 SAS, 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS

To configure alternate profiles under IEEE PTP Clock on a 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS

To associate an alternate profile to an IEEE PTP Port on a 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS

To configure an IEEE 1588 PTP clock on a 7705 SAR

To configure an IEC/IEEE 61850-9-3 PTP clock on a 7705 SAR

To configure alternate profiles under IEEE PTP Clock on a 7705 SAR

To associate an alternate profile to an IEEE PTP Port on a 7705 SAR

To configure an IEEE 1588 PTP port on a 7705 SAR

To configure system time on a 7705 SAR

To configure SNTP on a 7705 SAR

To configure VPLS scalability on a 7705 SAR

To configure NTP on supported devices

To configure NTP on 1830 VWM OSU devices

To configure SCADA on a 7705 SAR

To configure voice conference bridging on a 7705 SAR

To configure a 7705 SAR MW link

To configure a 7705 SAR MW link member

To configure 7705 SAR auxiliary alarm definitions

To manage an OmniSwitch running configuration

To configure OmniSwitch health monitoring

To configure a CCM on a 7950 XRS-20

To manage the internal fan on a 7210 SAS-D

To enable fan speed monitoring on a 7x50 device

To configure a power supply tray

To configure a power management zone

To configure a PCM tray

To provision an APEQ

To configure a variable power supply APEQ

To restart an 1830 VWM shelf

To configure optical protection switching on an 1830 VWM OPS shelf

To configure bi-directional protection switching on an 1830 VWM OPS shelf

To configure an OPS protection audit entity on an 1830 VWM OSU shelf

To activate or deactivate a PAE