Show Router Commands

router

Syntax

router [service-id]

Context

show

Description

This command provides access to the show commands for the service specified by the service-id.

Using service-id with this command applies only to VPRN service.

Parameters

service-id

specifies the service-id

Values: 1 to 2147483647 or service-name

aggregate

Syntax

aggregate [active]

Context

show>router

Description

This command displays aggregated routes.

Parameters

active: filters out inactive aggregates

Output

The following output is an example of aggregate route information, and Aggregate Table Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 104 aggregate
===============================================================================
Aggregates (Service: 104)
===============================================================================
Prefix                                          Aggr IP-Address   Aggr AS
   Summary                                         AS Set            State
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of Aggregates: 0
===============================================================================
*A:ALU-12#

Table 1. Aggregate Table Field Descriptions
Label	Description
Prefix	The destination address of the aggregate route in dotted-decimal notation
Summary	Specifies whether the aggregate or more specific components are advertised
AS Set	Displays an aggregate where the path advertised for the route consists of all elements contained in all paths that are being summarized
Aggr AS	The aggregator path attribute to the aggregate route
Aggr IP-Address	The IP address of the aggregated route
State	The operational state of the aggregated route
No. of Aggregates	The total number of aggregated routes

arp

Syntax

arp [ip-address | ip-int-name | mac ieee-mac-addr] [sdp sdp-id:vc-id] [summary]

Context

show>router

Description

This command displays the router ARP table sorted by IP address.

If no command line options are specified, all ARP entries are displayed.

Parameters

ip-addr: the IP address for which ARP entries will be displayed

ip-int-name: the interface name for which ARP entries will be displayed

ieee-mac-addr: the MAC address for which ARP entries will be displayed

sdp-id

the SDP ID for which ARP entries will be displayed

Values: 1 to 17407

Default: all SDPs

vc-id

the virtual circuit ID on the SDP ID

Values: 1 to 4294967295

summary: displays summary APR table information

Output

The following output is an example of ARP table information, and ARP Table Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 arp
===============================================================================
ARP Table (Service: 6)
===============================================================================
IP Address      MAC Address       Expiry    Type   Interface
-------------------------------------------------------------------------------
10.10.10.103    04:67:ff:00:00:01 00h00m00s  Oth   system
10.10.4.3       00:00:00:00:00:00 00h00m00s  Oth   ALU-1-2
-------------------------------------------------------------------------------
No. of ARP Entries: 2
===============================================================================
*A:ALU-12#

Table 2. ARP Table Field Descriptions
Label	Description
IP Address	The IP address of the ARP entry
MAC Address	The MAC address of the ARP entry
Expiry	The age of the ARP entry
Type	Dyn—the ARP entry is a dynamic ARP entry
	Inv—the ARP entry is an inactive static ARP entry (invalid)
	Oth—the ARP entry is a local or system ARP entry
	Sta—the ARP entry is an active static ARP entry
Interface	The IP interface name associated with the ARP entry
No. of ARP Entries	The number of ARP entries displayed in the list

bgp

Syntax

bgp

Context

show>router

Description

This command enables the context to display BGP-related information.

damping

Syntax

damping [ip-prefix[/ip-prefix-length]] [damp-type] [detail] [ipv4]

damping [ip-prefix[/ip-prefix-length]] [damp-type] [detail] ipv6

damping [ip-prefix[/ip-prefix-length]] [damp-type] [detail] vpn-ipv4

damping [ip-prefix[/ip-prefix-length]] [damp-type] [detail] vpn-ipv6

damping [ip-prefix[/ip-prefix-length]] [damp-type] [detail] mvpn-ipv4

Context

show>router>bgp

Description

This command displays BGP routes that have been dampened due to route flapping. This command can be entered with or without a route parameter. If no parameters are included, all dampened routes are listed.

If the keyword detail is included, more detailed information is displayed.

If a damp-type is specified, only those types of dampened routes (decayed, history, or suppressed) are displayed. Routes that have a state of decayed have gained penalties for flapping but have not yet reached the suppression limit. Routes that have a state of history have had a route flap and have been withdrawn. Routes that have a state of suppressed have reached the suppression limit and are not considered in BGP path selection.

Parameters

ip-prefix/ip-prefix-length

displays damping information for the specified IP address

Values

ipv4-prefix a.b.c.d (host bits must be 0)

ipv4-prefix-length 0 to 30

ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

ipv6-prefix-length 0 to 128

damp-type

displays damping information for routes with the specified damp type

Values: decayed, history, suppressed

detail: displays detailed information

ipv4: displays dampened routes for the IPv4 address family

ipv6: displays dampened routes for the IPv6 address family

vpn-ipv4: displays dampened routes for the VPN-IPv4 address family

vpn-ipv6: displays dampened routes for the VPN-IPv6 address family

mvpn-ipv4: displays dampened routes for the MVPN-IPv4 address family

Output

The following output is an example of BGP damping information, and BGP Damping Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 bgp neighbor damping
===============================================================================
 BGP Router ID:10.0.0.14         AS:65206       Local AS:65206
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP Damped Routes
===============================================================================
Flag  Network            From            Reuse       AS-Path 
------------------------------------------------------------------------------
ud*i  10.149.7.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      1239  22406 
si    10.155.6.0/23      10.0.28.1       00h43m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.8.0/22      10.0.28.1       00h38m31s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.12.0/22     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.22.0/23     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.24.0/22     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.28.0/22     10.0.28.1       00h34m31s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.40.0/21     10.0.28.1       00h28m24s   60203 65001 19855 3356
                                                      7911  7459 
si    10.155.48.0/20     10.0.28.1       00h28m24s   60203 65001 19855 3356
                                                      7911  7459 
ud*i  10.8.140.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      4637  17447 
ud*i  10.8.141.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      4637  17447 
ud*i  10.9.0.0/18        10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      3561  9658  6163 
. . .
ud*i  10.213.184.0/23    10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      6774  6774  9154 
------------------------------------------------------------------------------
*A:ALU-12#

*A: ALU-12# show router 6 bgp damping detail
==============================================================================
  BGP Router ID : 10.0.0.0         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - 
 valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes
==============================================================================
------------------------------------------------------------------------------
Network : 10.149.7.0/24
------------------------------------------------------------------------------
Network          : 10.149.7.0/24        Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h22m09s            Last update      : 02d00h58m
FOM Present      : 738                  FOM Last upd.    : 2039
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  1239  22406
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.142.48.0/20
------------------------------------------------------------------------------
Network          : 10.142.48.0/20       Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h00m38s            Last update      : 02d01h20m
FOM Present      : 2011                 FOM Last upd.    : 2023
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  3561  5551  1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.200.128.0/19
------------------------------------------------------------------------------
Network          : 10.200.128.0/19      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h00m38s            Last update      : 02d01h20m
FOM Present      : 2011                 FOM Last upd.    : 2023
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 1299  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.203.192.0/18
-------------------------------------------------------------------------------
Network          : 10.203.192.0/18      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h00m07s            Last update      : 02d01h20m
FOM Present      : 1018                 FOM Last upd.    : 1024
Number of Flaps  : 1                    Flags            : ud*i
Path             : 60203 65001 19855 1299  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
*A:ALU-12#

*A:ALU-12# show router 6 bgp neighbor damping suppressed detail
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes (Suppressed)
==============================================================================
Network : 10.142.48.0/20
------------------------------------------------------------------------------
Network          : 10.142.48.0/20       Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.200.128.0/19
------------------------------------------------------------------------------
Network          : 10.200.128.0/19      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.203.240.0/20
------------------------------------------------------------------------------
Network          : 10.203.240.0/20      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.206.0.0/17
------------------------------------------------------------------------------
Network          : 10.206.0.0/17        Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.10.10.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
*A:ALU-12#

Table 3. BGP Damping Field Descriptions
Label	Description
BGP Router ID	The local BGP router ID
AS	The configured autonomous system number
Local AS	The configured or inherited local AS for the specified peer group; if not configured, it is the same value as the AS
Network	The IP prefix and mask length for the route
Flag/Flags	Legend: Status codes: u-used, s-suppressed, h-history, d-decayed, -valid (if an is not present, the status is invalid) Origin codes: i-IGP, e-EGP, ?-incomplete, >-best
From	The originator ID path attribute value
Reuse/Reuse time	The time when a suppressed route can be used again
AS-Path	The BGP AS path for the route
Peer	The router ID of the advertising router
NextHop	The BGP next hop for the route
Peer AS	The autonomous system number of the advertising router
Peer Router-Id	The router ID of the advertising router
Local Pref	The BGP local preference path attribute for the route
Age	The time elapsed since the service was enabled
Last update	The time that BGP was last updated
FOM Present	The current Figure of Merit (FOM) value
FOM Last upd.	The last updated FOM value
Number of Flaps	The number of flaps in the neighbor connection
Reuse time	The time when the route can be reused
Path	The BGP AS path for the route
Applied Policy	The applied route policy name

group

Syntax

group [name] [detail]

Context

show>router>bgp

Description

This command displays group information for a BGP peer group. This command can be entered with or without parameters.

When this command is entered without a group name, information about all peer groups displays.

When the command is issued with a specific group name, information only pertaining to that specific peer group displays.

The ‟State” field displays the BGP group’s operational state. Valid states are:

Up — BGP global process is configured and running
Down — BGP global process is administratively shut down and not running
Disabled — BGP global process is operationally disabled. The process must be restarted by the operator.

Parameters

name: displays information for the specified BGP group

detail: displays detailed information

Output

The following output is an example of BGP group information, and BGP Group Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 bgp neighbor group
===============================================================================
BGP Group
===============================================================================
-------------------------------------------------------------------------------
Group            : bgp_group
-------------------------------------------------------------------------------
Group Type       : No Type              State            : Up
Peer AS          : n/a                  Local AS         : 1
Local Address    : n/a                  Loop Detect      : Ignore
Import Policy    : None Specified / Inherited
Export Policy    : None Specified / Inherited
Hold Time        : 90                   Keep Alive       : 30
Min Hold Time    : 10                   
Cluster Id       : None                 Client Reflect   : Enabled
NLRI             : Unicast              Preference       : 170
TTL Security     : Enabled              Min TTL Value    : 10
Graceful Restart : Enabled              Stale Routes Time: 360
Auth key chain   : n/a
Bfd Enabled      : Disabled
Creation Origin  : manual
Split Horizon    : Disabled

List of Peers
- 10.44.44.44 :

Total Peers      : 1                    Established      : 0
-------------------------------------------------------------------------------
Peer Groups : 1

*A:ALU-12# show router 6 bgp neighbor detail
===============================================================================
BGP Group  (detail)
===============================================================================
-------------------------------------------------------------------------------
Group            : bgp_group
-------------------------------------------------------------------------------
Group Type       : No Type              State            : Up
Peer AS          : n/a                  Local AS         : 1
Local Address    : n/a                  Loop Detect      : Ignore
Connect Retry    : 120                  Authentication   : None
Local Pref       : 100                  MED Out          : 0
Multihop         : 0 (Default)          AS Override      : Disabled
Min Route Advt.  : 30                   Min AS Originate : 15
Prefix Limit     : No Limit             Passive          : Disabled
Passive          : Disabled
Next Hop Self    : Disabled             Aggregator ID 0  : Disabled
Remove Private   : Disabled             Damping          : Enabled
Import Policy    : None Specified / Inherited
Export Policy    : None Specified / Inherited
Hold Time        : 90                   Keep Alive       : 30
Min Hold Time    : 10                   
Cluster Id       : None                 Client Reflect   : Enabled
NLRI             : Unicast              Preference       : 170
TTL Security     : Enabled              Min TTL Value    : 10
Graceful Restart : Enabled              Stale Routes Time: 360
Auth key chain   : n/a
Bfd Enabled      : Disabled
Creation Origin  : manual
Split Horizon    : Disabled

List of Peers
- 10.44.44.44 :

Total Peers      : 1                    Established      : 0
-------------------------------------------------------------------------------
Peer Groups : 1
===============================================================================
*A:ALU-12

Table 4. BGP Group Field Descriptions
Label	Description
Group	The BGP group name
Group Type	No Type: peer type not configured External: peer type configured as external BGP peers Internal: peer type configured as internal BGP peers
State	Disabled: the BGP peer group has been operationally disabled Down: the BGP peer group is operationally inactive Up: the BGP peer group is operationally active
Peer AS	The configured or inherited peer AS for the specified peer group
Local AS	The configured or inherited local AS for the specified peer group
Local Address	The configured or inherited local address for originating peering for the specified peer group
Loop Detect	The configured or inherited loop detect setting for the specified peer group
Connect Retry	The configured or inherited connect retry timer value
Authentication	None: no authentication is configured MD5: MD5 authentication is configured
Local Pref	The configured or inherited local preference value
MED Out	The configured or inherited MED value that is assigned to advertised routes
Multihop	The maximum number of router hops a BGP connection can traverse
AS Override	The setting of the AS override
Min Route Advt.	The minimum amount of time that must pass between route updates for the same IP prefix
Min AS Originate	The minimum amount of time that must pass between updates for a route originated by the local router
Prefix Limit	No Limit: no route limit assigned to the BGP peer group 1 — 4294967295: the maximum number of routes BGP can learn from a peer
Passive	Disabled: BGP attempts to establish a BGP connection with a neighbor in the specified peer group Enabled: BGP will not actively attempt to establish a BGP connection with a neighbor in the specified peer group
Next Hop Self	Disabled: BGP is not configured to send only its own IP address as the BGP next hop in route updates to neighbors in the peer group Enabled: BGP sends only its own IP address as the BGP next hop in route updates to neighbors in the specified peer group
Aggregator ID 0	Disabled: BGP is not configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates sent to the neighbor in the peer group Enabled: BGP is configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates sent to the neighbor in the peer group
Remove Private	Disabled: BGP will not remove all private AS numbers from the AS path attribute in updates sent to the neighbor in the peer group Enabled: BGP removes all private AS numbers from the AS path attribute in updates sent to the neighbor in the peer group
Damping	Disabled: the peer group is configured not to dampen route flaps Enabled: the peer group is configured to dampen route flaps
Import Policy	The configured import policies for the peer group
Export Policy	The configured export policies for the peer group
Hold Time	The configured hold-time setting
Keep Alive	The configured keepalive setting
Min Hold Time	The configured minimum hold-time setting
Cluster Id	The configured route reflector cluster ID None: No cluster ID has been configured
Client Reflect	Disabled: the BGP route reflector will not reflect routes to this neighbor Enabled: the BGP route reflector is configured to reflect routes to this neighbor
NLRI	The type of network layer reachability information that the specified peer group can accept Unicast: IPv4 unicast routing information can be carried
Preference	The configured route preference value for the peer group
TTL Security	Enabled: TTL security is enabled Disabled: TTL security is disabled
Min TTL Value	The minimum TTL value configured for the peer
Graceful Restart	The state of graceful restart
Stale Routes Time	The length of time that stale routes are kept in the route table
Auth key chain	The value for the authentication key chain
Bfd Enabled	Enabled: BFD is enabled Disabled: BFD is disabled
Creation Origin	The creation method of the peer group
Split Horizon	The configured split-horizon setting
List of Peers	A list of BGP peers configured under the peer group
Total Peers	The total number of peers configured under the peer group
Established	The total number of peers that are in an established state
Peer Groups	The number of peer groups

neighbor

Syntax

neighbor [ip-address [detail]]

neighbor [as-number [detail]]

neighbor ip-address [family[type mvpn-type]] filter1 [brief]

neighbor ip-address [family] filter2

neighbor as-number [family] filter2

neighbor ip-address orf [filter3]

neighbor ip-address graceful-restart

neighbor [dynamic]

Context

show>router>bgp

Description

This command displays BGP neighbor information. This command can be entered with or without any parameters.

When this command is issued without any parameters, information about all BGP peers displays.

When the command is issued with a specific IP address or ASN, information about only that specific peer or peers with the same AS displays.

Note: This information is not available when using SNMP.

Parameters

ip-address

the specified IP address for which to display information

Values

ipv4-address: a.b.c.d (host bits must be 0)

ipv6-address: x:x:x:x:x:x:x:x[-interface]

x:x:x:x:x:x:d.d.d.d[-interface]

interface - 32 chars max, mandatory for link local addresses

x: [0 to FFFF]H

d: [0 to 255]D

detail: displays detailed information

as-number

the specified AS number for which to display information

Values: 1 to 4294967295

family

the type of routing information to be distributed by this peer group

Values

ipv4 — displays only those BGP peers that have the IPv4 family enabled and not those capable of exchanging VPN-IPv4 routes

label-ipv4 — displays only those BGP peers that have the label-IPv4 family enabled

vpn-ipv4 — displays only those BGP peers that have the VPN-IPv4 family enabled

mvpn-ipv4 — displays only those BGP peers that have the MVPN-IPv4 family enabled

type: displays information for the MVPN type

mvpn-type

the specified MVPN type for which to display information

Values: intra-ad | inter-ad | spmsi-ad | leaf-ad | source-ad | shared-join | source-join

filter1

displays information for the specified IP address

Values

received-routes — displays the number of routes received from this peer

advertised-routes — displays the number of routes advertised by this peer

filter2

displays information for the specified AS number

Values

history — displays statistics for dampened routes

suppressed — displays the number of paths from this peer that have been suppressed by damping

Note: When either received-routes or advertised-routes is specified, the routes that are received from or sent to the specified peer are listed. When either history or suppressed is specified, the routes that are learned from those peers that either have a history or are suppressed are listed.

brief: displays information in a brief format. This parameter is only supported with received-routes and advertised-routes.

orf: displays outbound route filtering for the BGP instance. ORF (Outbound Route Filtering) is used to inform a neighbor of targets (using target-list) that it is willing to receive. This mechanism helps lessen the update exchanges between neighbors and saves CPU cycles to process routes that could have been received from the neighbor only to be dropped/ignored.

filter3

displays path information for the specified IP address

Values

send — displays the number of paths sent to this peer

receive — displays the number of paths received from this peer

graceful-restart: displays neighbors configured for graceful restart

dynamic: displays information for dynamic BGP neighbors

Output

The following outputs are examples of BGP neighbor information:

BGP neighbor (standard, detailed, and dynamic) (Output Example - BGP Neighbor (standard, detailed, and dynamic), BGP Neighbor (Standard, Detailed, and Dynamic) Field Descriptions )
BGP neighbor (advertised and received) (Output Example - BGP Neighbor (advertised-routes and received-routes), BGP Neighbor (Advertised-Routes and Received-Routes) Field Descriptions)
BGP neighbor (graceful restart) (Output Example - BGP Neighbor (graceful restart), BGP Neighbor (Graceful Restart) Field Descriptions)

Output Example - BGP Neighbor (standard, detailed, and dynamic)

*A:ALU-12# show router 6 bgp neighbor
===============================================================================
BGP Neighbor
===============================================================================
-------------------------------------------------------------------------------
Peer  : 10.10.10.12
Group : ibgp_group
-------------------------------------------------------------------------------
Peer AS              : 65000            Peer Port            : 49550
Peer Address         : 10.10.10.12
Local AS             : 65000            Local Port           : 179
Local Address        : 10.10.10.1
Peer Type            : Internal         Dynamic Peer         : No
State                : Established      Last State           : Established
Last Event           : recvKeepAlive
Last Error           : Cease
Local Family         : IPv4 VPN-IPv4
Remote Family        : IPv4 VPN-IPv4
Hold Time            : 90               Keep Alive           : 30
Active Hold Time     : 90               Active Keep Alive    : 30
Cluster Id           : None
Preference           : 170              Num of Flaps         : 0
Recd. Paths          : 19
IPv4 Recd. Prefixes  : 600              IPv4 Active Prefixes : 563
IPv4 Suppressed Pfxs : 0                VPN-IPv4 Suppr. Pfxs : 0
VPN-IPv4 Recd. Pfxs  : 8656             VPN-IPv4 Active Pfxs : 8656
Mc IPv4 Recd. Pfxs.  : 0                Mc IPv4 Active Pfxs. : 0
Mc IPv4 Suppr. Pfxs  : 0
Input Queue          : 0                Output Queue         : 0
i/p Messages         : 1141             o/p Messages         : 1041
i/p Octets           : 449029           o/p Octets           : 163814
i/p Updates          : 151              o/p Updates          : 50
TTL Security         : Enabled          Min TTL Value        : 10
Graceful Restart     : Disabled         Stale Routes Time    : n/a
Advertise Inactive   : Disabled         Peer Tracking        : Disabled
Auth key chain       : n/a
Bfd Enabled          : Enabled
Local Capability     : RouteRefresh MP-BGP
Remote Capability    : RouteRefresh MP-BGP
Import Policy        : None Specified / Inherited
Export Policy        : stmt1
-------------------------------------------------------------------------------
Neighbors : 1
===============================================================================
*A:ALU-12#

*A:ALU-12# show router 6 bgp neighbor 10.10.10.12 detail
===============================================================================
BGP Neighbor
===============================================================================
-------------------------------------------------------------------------------
Peer  : 10.10.10.12
Group : iBGP
-------------------------------------------------------------------------------
Peer AS              : 65000            Peer Port            : 49550
Peer Address         : 10.10.10.12
Local AS             : 65000            Local Port           : 179
Local Address        : 10.10.10.1
Peer Type            : Internal         Dynamic Peer         : No
State                : Established      Last State           : Established
Last Event           : recvKeepAlive
Last Error           : Cease
Local Family         : IPv4 VPN-IPv4
Remote Family        : IPv4 VPN-IPv4
Connect Retry        : 120              Local Pref.          : 70
Min Route Advt.      : 30               Min AS Orig.         : 15
Multihop             : 0 (Default)      AS Override          : Disabled
Damping              : Disabled         Loop Detect          : Ignore
MED Out              : No MED Out       Authentication       : None
Next Hop Self        : Disabled         AggregatorID Zero    : Disabled
Remove Private       : Disabled         Passive              : Disabled
Peer Identifier      : 10.10.10.12      Fsm Est. Trans       : 1
Fsm Est. Time        : 22h42m46s        InUpd Elap. Time     : 22h54m31s
Prefix Limit         : No Limit
Hold Time            : 90               Keep Alive           : 30
Active Hold Time     : 90               Active Keep Alive    : 30
Cluster Id           : None             Client Reflect       : Disabled
Preference           : 170              Num of Flaps         : 0
Recd. Paths          : 19
IPv4 Recd. Prefixes  : 600              IPv4 Active Prefixes : 563
IPv4 Suppressed Pfxs : 0                VPN-IPv4 Suppr. Pfxs : 0
VPN-IPv4 Recd. Pfxs  : 8656             VPN-IPv4 Active Pfxs : 8656
Mc IPv4 Recd. Pfxs.  : 0                Mc IPv4 Active Pfxs. : 0
Mc IPv4 Suppr. Pfxs  : 0
Input Queue          : 0                Output Queue         : 0
i/p Messages         : 2881             o/p Messages         : 2777
i/p Octets           : 482089           o/p Octets           : 196798
i/p Updates          : 151              o/p Updates          : 50
TTL Security         : Enabled          Min TTL Value        : 10
Graceful Restart     : Disabled         Stale Routes Time    : n/a
Advertise Inactive   : Disabled         Peer Tracking        : Disabled
Auth key chain       : n/a
Bfd Enabled          : Enabled
Local Capability     : RouteRefresh MP-BGP
Remote Capability    : RouteRefresh MP-BGP
Import Policy        : None Specified / Inherited
Export Policy        : stmt1
-------------------------------------------------------------------------------
Neighbors : 1
===============================================================================
*A:ALU-12#

*A:ALU-12# show router 6 bgp neighbor 10.10.10.11 orf
===============================================================================
BGP Neighbor 10.0.0.11 ORF
===============================================================================
Send List (Automatic)
-------------------------------------------------------------------------------
target:65535:10
target:65535:20
===============================================================================
*A:ALU-12#

*A:7705_ALU-2>show>router>bgp# neighbor dynamic
===============================================================================
BGP Neighbor
===============================================================================
-------------------------------------------------------------------------------
Peer                 : 10.100.1.3
Description          : (Not Specified)
Group                : dynamic
-------------------------------------------------------------------------------
Peer AS              : 65000            Peer Port            : 51374
Peer Address         : 10.100.1.3
Local AS             : 65000            Local Port           : 179  
Local Address        : 10.100.1.2
Peer Type            : Internal         Dynamic Peer         : Yes
State                : Established      Last State           : Established
Last Event           : recvKeepAlive
Last Error           : Cease (Connection Collision Resolution)
Local Family         : IPv4 VPN-IPv4 IPv6 VPN-IPv6
Remote Family        : IPv4 VPN-IPv4 IPv6 VPN-IPv6
Hold Time            : 90               Keep Alive           : 30   
Min Hold Time        : 0                
Active Hold Time     : 90               Active Keep Alive    : 30   
Cluster Id           : None             
Preference           : 170              Num of Update Flaps  : 0    
Recd. Paths          : 6                
IPv4 Recd. Prefixes  : 5                IPv4 Active Prefixes : 0    
IPv4 Suppressed Pfxs : 0                VPN-IPv4 Suppr. Pfxs : 0    
VPN-IPv4 Recd. Pfxs  : 0                VPN-IPv4 Active Pfxs : 0    
IPv6 Suppressed Pfxs : 0    
IPv6 Recd. Prefixes  : 2                IPv6 Active Prefixes : 0    
VPN-IPv6 Recd. Pfxs  : 0                VPN-IPv6 Active Pfxs : 0    
VPN-IPv6 Suppr. Pfxs : 0                
MVPN-IPv4 Suppr. Pfxs: 0                MVPN-IPv4 Recd. Pfxs : 0    
MVPN-IPv4 Active Pfxs: 0                
Flow-IPv4 Suppr. Pfxs: 0                Flow-IPv4 Recd. Pfxs : 0    
Flow-IPv4 Active Pfxs: 0                Rte-Tgt Suppr. Pfxs  : 0    
Rte-Tgt Recd. Pfxs   : 0                Rte-Tgt Active Pfxs  : 0    
Backup IPv4 Pfxs     : 0                Backup IPv6 Pfxs     : 0    
Mc Vpn Ipv4 Suppr. P*: 0                
Backup Vpn IPv4 Pfxs : 0                Backup Vpn IPv6 Pfxs : 0    
Input Queue          : 0                Output Queue         : 0    
i/p Messages         : 11               o/p Messages         : 9    
i/p Octets           : 951              o/p Octets           : 445
i/p Updates          : 6                o/p Updates          : 4    
Evpn Suppr. Pfxs     : 0                Evpn Recd. Pfxs      : 0    
Evpn Active Pfxs     : 0                
MS-PW Suppr. Pfxs    : 0                MS-PW Recd. Pfxs     : 0    
MS-PW Active Pfxs    : 0                
TTL Security         : Disabled         Min TTL Value        : n/a
Graceful Restart     : Disabled         Stale Routes Time    : n/a
Advertise Inactive   : Disabled         Peer Tracking        : Disabled
Auth key chain       : n/a
Disable Cap Nego     : Disabled         Bfd Enabled          : Disabled
Flowspec Validate    : Disabled         Default Route Tgt    : Disabled
Aigp Metric          : Disabled         Split Horizon        : Enabled
Local Capability     : RtRefresh MPBGP 4byte ASN 
Remote Capability    : RtRefresh MPBGP 4byte ASN 
Local AddPath Capabi*: Disabled
Remote AddPath Capab*: Send - None
                     : Receive - None
Import Policy        : None Specified / Inherited
Export Policy        : expPol
Origin Validation    : N/A
EBGP Link Bandwidth  : n/a
IPv4 Rej. Pfxs       : 0                IPv6 Rej. Pfxs       : 0    
VPN-IPv4 Rej. Pfxs   : 0                VPN-IPv6 Rej. Pfxs   : 0    
Mc IPv4 Rej. Pfxs    : 0                Mc IPv6 Rej. Pfxs    : 0    
MVPN-IPv4 Rej. Pfxs  : 0                MVPN-IPv6 Rej. Pfxs  : 0    
Flow-IPv4 Rej. Pfxs  : 0                Flow-IPv6 Rej. Pfxs  : 0    
L2-VPN Rej. Pfxs     : 0                MDT-SAFI Rej. Pfxs   : 0    
Rte-Tgt Rej. Pfxs    : 0                MS-PW Rej. Pfxs      : 0    
Mc Vpn Ipv4 Rej. Pfxs: 0                Evpn Rej. Pfxs       : 0    
Label-v4 Suppr. Pfxs : 0                Label-v4 Recd. Pfxs  : 0    
Label-v4 Active Pfxs : 0                Label-v4 Rej. Pfxs   : 0    
Label-v6 Suppr. Pfxs : 0                Label-v6 Recd. Pfxs  : 0    
Label-v6 Active Pfxs : 0                Label-v6 Rej. Pfxs   : 0    
Bgp-Ls Suppr. Pfxs   : 0                Bgp-Ls Recd. Pfxs    : 0    
Bgp-Ls Active Pfxs   : 0                Bgp-Ls Rej. Pfxs     : 0    
-------------------------------------------------------------------------------

Table 5. BGP Neighbor (Standard, Detailed, and Dynamic) Field Descriptions
Label	Description
Peer	The IP address of the configured BGP peer
Group	The BGP peer group to which this peer is assigned
Peer AS	The configured or inherited peer AS for the peer group
Peer Address	The configured address for the BGP peer
Peer Port	The TCP port number used on the far-end system
Local AS	The configured or inherited local AS for the peer group
Local Address	The configured or inherited local address for originating peering for the peer group
Local Port	The TCP port number used on the local system
Peer Type	External: peer type configured as external BGP peers
Peer Type	Internal: peer type configured as internal BGP peers
Dynamic Peer	Yes: the session is dynamic (that is, unconfigured)
Dynamic Peer	No: the session is statically configured
State	Idle: The BGP peer is not accepting connections. (Shutdown) is also displayed if the peer is administratively disabled.
	Active: BGP is listening for and accepting TCP connections from this peer
	Connect: BGP is attempting to establish a TCP connection with this peer
	Open Sent: BGP has sent an OPEN message to the peer and is waiting for an OPEN message from the peer
	Open Confirm: BGP has received a valid OPEN message from the peer and is awaiting a KEEPALIVE or NOTIFICATION
	Established: BGP has successfully established a peering session and is exchanging routing information
Last State	Idle: The BGP peer is not accepting connections
	Active: BGP is listening for and accepting TCP connections from this peer
	Connect: BGP is attempting to establish a TCP connections with this peer
	Open Sent: BGP has sent an OPEN message to the peer and is waiting for an OPEN message from the peer
	Open Confirm: BGP has received a valid OPEN message from the peer and is awaiting a KEEPALIVE or NOTIFICATION
Last Event	start: BGP has initialized the BGP neighbor
	stop: BGP has disabled the BGP neighbor
	open: BGP transport connection is opened
	close: BGP transport connection is closed
	openFail: BGP transport connection failed to open
	error: BGP transport connection error
	connectRetry: the connect retry timer expired
	holdTime: the hold time timer expired
	keepAlive: the keepalive timer expired
	recvOpen: BGP has received an OPEN message
	revKeepalive: BGP has received a KEEPALIVE message
	recvUpdate: BGP has received an UPDATE message
	recvNotify: BGP has received a NOTIFICATION message
	None: no events have occurred
Last Error	The last BGP error and subcode to occur on the BGP neighbor
Local Family	The configured local family value
Remote Family	The configured remote family value
Connect Retry	The configured or inherited connect retry timer value
Local Pref.	The configured or inherited local preference value
Min Route Advt.	The minimum amount of time that must pass between route updates for the same IP prefix
Min AS Originate	The minimum amount of time that must pass between updates for a route originated by the local router
Multihop	The maximum number of router hops a BGP connection can traverse
Damping	Disabled: the BGP neighbor is configured not to dampen route flaps
Damping	Enabled: the BGP neighbor is configured to dampen route flaps
Loop Detect	Ignore: The BGP neighbor is configured to ignore routes with an AS loop
	Drop: The BGP neighbor is configured to drop the BGP peering if an AS loop is detected
	Off: AS loop detection is disabled for the neighbor
MED Out	The configured or inherited MED value that is assigned to advertised routes
Authentication	None: no authentication is configured
Authentication	MD5: MD5 authentication is configured
Next Hop Self	Disabled: BGP is not configured to send only its own IP address as the BGP next hop in route updates to the specified neighbor
Next Hop Self	Enabled: BGP will send only its own IP address as the BGP next hop in route updates to the neighbor
AggregatorID Zero	Disabled: the BGP neighbor is not configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates
AggregatorID Zero	Enabled: the BGP neighbor is configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates
Remove Private	Disabled: BGP will not remove all private AS numbers from the AS path attribute in updates sent to the specified neighbor
Remove Private	Enabled: BGP will remove all private AS numbers from the AS path attribute in updates sent to the specified neighbor
Passive	Disabled: BGP will actively attempt to establish a BGP connection with the specified neighbor
Passive	Enabled: BGP will not actively attempt to establish a BGP connection with the specified neighbor
Peer Identifier	The IP identifier for the peer router
Prefix Limit	No Limit: no route limit assigned to the BGP peer group
Prefix Limit	1 — 4294967295: the maximum number of routes BGP can learn from a peer
Pref Limit Idle Time*	The length of time that the session is held in the idle state after it is taken down as a result of reaching the prefix limit
Hold Time	The configured hold-time setting
Keep Alive	The configured keepalive setting
Min Hold Time	The configured minimum hold-time setting
Active Hold Time	The negotiated hold time, if the BGP neighbor is in an established state
Active Keep Alive	The negotiated keepalive time, if the BGP neighbor is in an established state
Cluster Id	The configured route reflector cluster ID
Cluster Id	None: no cluster ID has been configured
Client Reflect	Disabled: The BGP route reflector is configured not to reflect routes to this neighbor
Client Reflect	Enabled: The BGP route reflector is configured to reflect routes to this neighbor
Preference	The configured route preference value for the peer group
Num of Flaps	The number of route flaps in the neighbor connection
Recd. Paths	The number of unique sets of path attributes received from the BGP neighbor
IPv4 Recd. Prefixes	The number of unique sets of IPv4 path attributes received from the BGP neighbor
IPv4 Active Prefixes	The number of IPv4 routes received from the BGP neighbor and active in the forwarding table
IPv4 Suppressed Pfxs	The number of unique sets of IPv4 path attributes received from the BGP neighbor and suppressed due to route damping
VPN-IPv4 Suppr. Pfxs	The number of unique sets of VPN-IPv4 path attributes received from the BGP neighbor and suppressed due to route damping
VPN-IPv4 Recd. Pfxs	The number of unique sets of VPN-IPv4 path attributes received from the BGP neighbor
VPN-IPv4 Active Pfxs	The number of VPN-IPv4 routes received from the BGP neighbor and active in the forwarding table
IPv6 Suppressed. Pfxs	The number of unique sets of IPv6 path attributes received from the BGP neighbor and suppressed due to route damping
IPv6 Recd. Prefixes	The number of unique sets of IPv6 path attributes received from the BGP neighbor
IPv6 Active Prefixes	The number of IPv6 routes received from the BGP neighbor and active in the forwarding table
VPN-IPv6 Recd. Pfxs	The number of unique sets of VPN-IPv6 path attributes received from the BGP neighbor
VPN-IPv6 Active Pfxs	The number of VPN-IPv6 routes received from the BGP neighbor and active in the forwarding table
VPN-IPv6 Suppr. Pfxs	The number of unique sets of VPN-IPv6 path attributes received from the BGP neighbor and suppressed due to route damping
MVPN-IPv4 Suppr. Pfxs	The number of unique sets of MVPN-IPv4 path attributes received from the BGP neighbor and suppressed due to route damping
MVPN-IPv4 Recd. Pfxs	The number of unique sets of MVPN-IPv4 path attributes received from the BGP neighbor
MVPN-IPv4 Active Pfxs	The number of MVPN-IPv4 routes received from the BGP neighbor and active in the forwarding table
Flow-IPv4 Suppr. Pfxs	N/A
Flow-IPv4 Recd. Pfxs	N/A
Flow-IPv4 Active Pfxs	N/A
Rte-Tgt Suppr. Pfxs	The number of unique sets of route target path attributes received from the BGP neighbor and suppressed due to route damping
Rte-Tgt Recd. Pfxs	The number of unique sets of route target path attributes received from the BGP neighbor
Rte-Tgt Active. Pfxs	The number of route target routes received from the BGP neighbor and active in the forwarding table
Backup IPv4 Pfxs	The number of BGP Fast Reroute backup path IPv4 prefixes
Backup IPv6 Pfxs	The number of BGP Fast Reroute backup path IPv6 prefixes
Mc Vpn Ipv4 Suppr. P*	N/A
Backup Vpn IPv4 Pfxs	The number of BGP Fast Reroute backup path VPN IPv4 prefixes
Backup Vpn IPv6 Pfxs	The number of BGP Fast Reroute backup path VPN IPv6 prefixes
Input Queue	The number of BGP messages to be processed
Output Queue	The number of BGP messages to be transmitted
i/p Messages	The total number of packets received from the BGP neighbor
o/p Messages	The total number of packets sent to the BGP neighbor
i/p Octets	The total number of octets received from the BGP neighbor
o/p Octets	The total number of octets sent to the BGP neighbor
i/p Updates	The total number of updates received from the BGP neighbor
o/p Updates	The total number of updates sent to the BGP neighbor
Evpn Suppr. Pfxs	The number of unique sets of EVPN-IPv4 path attributes received from the BGP neighbor and suppressed due to route damping
Evpn Recd. Pfxs	The number of unique sets of EVPN-IPv4 path attributes received from the BGP neighbor
Evpn Active Pfxs	The number of EVPN-IPv4 routes received from the BGP neighbor and active in the forwarding table
MS-PW Suppr. Pfxs	N/A
MS-PW Recd. Pfxs	N/A
MS-PW Active Pfxs	N/A
TTL Security	Enabled: TTL security is enabled Disabled: TTL security is disabled
Min TTL Value	The minimum TTL value configured for the peer
Graceful Restart	The state of graceful restart
Stale Routes Time	The length of time that stale routes are kept in the route table
Advertise Inactive	The state of advertising inactive BGP routes to other BGP peers (enabled or disabled)
Peer Tracking	The state of tracking a neighbor IP address in the routing table for a BGP session
Advertise Label	Indicates the enabled address family for supporting RFC 3107 BGP label capability
Auth key chain	The value for the authentication key chain
Disable Cap Nego	N/A
Bfd Enabled	Enabled: BFD is enabled Disabled: BFD is disabled
Flowspec Validate	N/A
Default Route Tgt	Indicates that the default RTC route (zero prefix length) is originated toward the selected peers
Aigp Metric	Indicates whether accumulated IGP (AIGP) path attribute support with one or more BGP peers is enabled or disabled
Split Horizon	Indicates whether split horizon is enabled or disabled, When enabled, split horizon prevents routes from being reflected back to a peer that sends the best route.
Local Capability	The capability of the local BGP speaker; for example, route refresh, MP-BGP, ORF
Remote Capability	The capability of the remote BGP peer; for example, route refresh, MP-BGP, ORF
Local AddPath Capabi*	The state of the local BGP add-paths capabilities. The add-paths capability allows the router to send and receive multiple paths per prefix to or from a peer.
Remote AddPath Capab*	The state of the remote BGP add-paths capabilities
Import Policy	The configured import policies for the peer group
Export Policy	The configured export policies for the peer group
Origin Validation	N/A
EBGP Link Bandwidth	N/A
IPv4 Rej. Pfxs	The number of unique sets of IPv4 path attributes received from the BGP neighbor and rejected by the router
IPv6 Rej. Pfxs	The number of unique sets of IPv6 path attributes received from the BGP neighbor and rejected by the router
VPN-IPv4 Rej. Pfxs	The number of unique sets of VPN-IPv4 path attributes received from the BGP neighbor and rejected by the router
VPN-IPv6 Rej. Pfxs	The number of unique sets of VPN-IPv6 path attributes received from the BGP neighbor and rejected by the router
Mc IPv4 Rej. Pfxs	The number of unique sets of MC IPv4 path attributes received from the BGP neighbor and rejected by the router
Mc IPv6 Rej. Pfxs	The number of unique sets of MC IPv6 path attributes received from the BGP neighbor and rejected by the router
MVPN-IPv4 Rej. Pfxs	The number of unique sets of MVPN-IPv4 path attributes received from the BGP neighbor and rejected by the router
MVPN-IPv6 Rej. Pfxs	The number of unique sets of MVPN-IPv6 path attributes received from the BGP neighbor and rejected by the router
Flow-IPv4 Rej. Pfxs	The number of unique sets of path attributes received from the BGP neighbor and rejected by the router
Flow-IPv6 Rej. Pfxs	The number of unique sets of Flow-IPv6 path attributes received from the BGP neighbor and rejected by the router
L2-VPN Rej. Pfxs	The number of unique sets of L2-VPN path attributes received from the BGP neighbor and rejected by the router
MDT-SAFI Rej. Pfxs	The number of unique sets of MDT-SAFI path attributes received from the BGP neighbor and rejected by the router
Rte-Tgt Rej. Pfxs	The number of unique sets of route target path attributes received from the BGP neighbor and rejected by the router
MS-PW Rej. Pfxs	The number of unique sets of MS-PW path attributes received from the BGP neighbor and rejected by the router
Mc Vpn Ipv4 Rej. Pfxs	The number of unique sets of MC VPN IPv4 path attributes received from the BGP neighbor and rejected by the router
Evpn Rej. Pfxs	The number of unique sets of EVPN path attributes received from the BGP neighbor and rejected by the router
Label-v4 Suppr. Pfxs	The number of unique sets of label-IPv4 path attributes received from the BGP neighbor and suppressed due to route damping
Label-v4 Recd. Pfxs	The number of unique sets of label-IPv4 path attributes received from the BGP neighbor
Label-v4 Active Pfxs	The number of label-IPv4 routes received from the BGP neighbor and active in the forwarding table
Label-v4 Rej. Pfxs	The number of unique sets of label-IPv4 path attributes received from the BGP neighbor and rejected by the router
Label-v6 Suppr. Pfxs	The number of unique sets of label-IPv6 path attributes received from the BGP neighbor and suppressed due to route damping
Label-v6 Recd. Pfxs	The number of unique sets of label-IPv6 path attributes received from the BGP neighbor
Label-v6 Active Pfxs	The number of label-IPv6 routes received from the BGP neighbor and active in the forwarding table
Label-v6 Rej. Pfxs	The number of unique sets of label-IPv6 path attributes received from the BGP neighbor and rejected by the router
Bgp-Ls Suppr. Pfxs	The number of unique sets of BGP LS path attributes received from the BGP neighbor and suppressed due to route damping
Bgp-Ls Recd. Pfxs	The number of unique sets of BGP LS path attributes received from the BGP neighbor
Bgp-Ls Active Pfxs	The number of BGP LS routes received from the BGP neighbor and active in the forwarding table
Bgp-Ls Rej. Pfxs	The number of unique sets of BGP LS path attributes received from the BGP neighbor and rejected by the router

Output Example - BGP Neighbor (advertised-routes and received-routes)

*A:ALU-12# show router 6 bgp neighbor 10.44.44.44 advertised-routes
===============================================================================
 BGP Router ID : 10.55.55.55       AS : 1       Local AS : 1
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP IPv4 Routes
===============================================================================
Flag  Network                                           LocalPref   MED
      Nexthop                                           Path-Id     Label
      As-Path
-------------------------------------------------------------------------------
?     10.0.0.02/32                                      100         none
      10.0.0.16                                         -
      No As-Path
?     10.0.6.04/24                                      100         none 
      10.0.0.16                                         -
      No As-Path
-------------------------------------------------------------------------------
Routes : 2 
===============================================================================
*A:ALU-12#

*A:ALU-12# show router 6 bgp neighbor 10.10.10.12 advertised-routes  brief
===============================================================================
 BGP Router ID : 10.10.10.1        AS : 65000   Local AS : 65000
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP IPv4 Routes
===============================================================================
Flag  Network
-------------------------------------------------------------------------------
?     10.10.10.1/32
?     10.10.10.0/24
?     10.10.10.1/24
?     10.10.10.2/24
?     10.10.10.3/24
-------------------------------------------------------------------------------
Routes : 5 
===============================================================================
*A:ALU-12#

*A:ALU-12# show router 6 bgp neighbor 10.44.44.44 received-routes
===============================================================================
 BGP Router ID : 10.55.55.55       AS : 1       Local AS : 1
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP IPv4 Routes
===============================================================================
Flag  Network                                           LocalPref   MED
      Nexthop                                           Path-Id     Label
      As-Path
-------------------------------------------------------------------------------
?     10.0.0.16/32                                       100         none
      10.0.0.16                                          -
      No As-Path
?     10.0.6.0/24                                        100         none 
      10.0.0.16 -
      No As-Path
?     10.0.8.0/24                                        100         none 
      10.0.0.16                                          -
      No As-Path
?     10.0.12.0/24                                       100         none 
      10.0.0.16                                          -
      No As-Path
-------------------------------------------------------------------------------
Routes : 4 
===============================================================================
*A:ALU-12#

Table 6. BGP Neighbor (Advertised-Routes and Received-Routes) Field Descriptions
Label	Description
BGP Router ID	The local BGP router ID
AS	The configured autonomous system number
Local AS	The configured local AS setting. If not configured, then it is the same value as the AS.
Flag/Flags	Legend: Status codes: u - used s - suppressed h - history d - decayed * - valid If an * is not present, then the status is invalid Origin codes: i - IGP e - EGP ? - incomplete > - best
Network	The route IP prefix and mask length for the route
Next Hop	The BGP next hop for the route
LocalPref	The BGP local preference path attribute for the route
MED	The BGP Multi-Exit Discriminator (MED) path attribute for the route
AS-Path	The BGP AS path for the route

Output Example - BGP Neighbor (graceful restart)

*A:ALU-12# show router 6 bgp neighbor 10.10.120.44 graceful-restart
===============================================================================
BGP Neighbor 10.10.120.44 Graceful Restart
===============================================================================
Graceful Restart locally configured for peer  : Enabled
Peer's Graceful Restart feature               : Enabled
NLRI(s) that peer supports restart for        : IPv4-Unicast IPv4-MPLS IPv4-VPN
NLRI(s) that peer saved forwarding for        : IPv4-Unicast IPv4-MPLS IPv4-VPN
NLRI(s) that restart is negotiated for        : None
NLRI(s) of received end-of-rib markers        : IPv4-Unicast
NLRI(s) of all end-of-rib markers sent        : IPv4-Unicast
Restart time locally configured for peer      : 120 seconds
Restart time requested by the peer            : 390 seconds
Time stale routes from peer are kept for      : 360 seconds
Graceful restart status on the peer           : Not currently being helped
Number of Restarts                            : 328
Last Restart at                               : 08/20/2006 12:22:06
===============================================================================
*A:ALU-12#

Table 7. BGP Neighbor (Graceful Restart) Field Descriptions
Label	Description
BGP Neighbor	The IP address of the BGP neighbor
Graceful Restart locally configured for peer	The configured state of graceful restart for the local router
Peer's Graceful Restart feature	The configured state of graceful restart for the peer router
NLRI(s) that peer supports restart for	The families supported by the peer router for graceful restart
NLRI(s) that peer saved forwarding for	The families for which the peer router continued to forward packets after graceful restart
NLRI(s) that restart is negotiated for	The families that negotiate restart during graceful restart
NLRI(s) of received end-of-rib markers	The families for which end-of-RIB markers have been received
NLRI(s) of all end-of-rib markers sent	The families for which end-of-RIB markers have been sent
Restart time locally configured for peer	The length of time configured on the local router for the peer router’s graceful restart
Restart time requested by the peer	The length of time requested by the peer router for graceful restart
Time stale routes from peer are kept for	The length of time that the local router continues to support stale routes
Graceful restart status on the peer	The status of graceful restart on the peer router
Number of Restarts	The number of restarts since graceful restart is enabled between peers
Last Restart at	The local time of the last graceful restart

next-hop

Syntax

next-hop [family] [ip-address] [detail]

Context

show>router>bgp

Description

This command displays BGP next-hop information.

Parameters

family

the type of routing information to be distributed by the BGP instance

Values

ipv4 — displays only those BGP peers that have the IPv4 family enabled and not those capable of exchanging VPN-IPv4 routes

ipv6 — displays only those BGP peers that have the IPv6 family enabled and not those capable of exchanging VPN-IPv6 routes

label-ipv4 — displays only those BGP peers that support the IPv4 unicast (labeled) address family

vpn-ipv4 — displays only those BGP peers that have the VPN-IPv4 family enabled

vpn-ipv6 — displays only those BGP peers that have the VPN-IPv4 family enabled

mvpn-ipv4 — displays only those BGP peers that have the MVPN-IPv4 family enabled

ip-address

displays the next hop information for the specified IP address

Values

ipv4-address: a.b.c.d

ipv6-address: x:x:x:x:x:x:x:x[-interface]

x:x:x:x:x:x:d.d.d.d[-interface]

interface - 32 chars max, mandatory for link local addresses

x: [0 to FFFF]H

d: [0 to 255]D

detail: displays the more detailed version of the output

Output

The following output is an example of BGP next-hop information, and BGP Next-Hop Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 bgp next-hop
===============================================================================
 BGP Router ID : 10.10.10.1        AS : 65000   Local AS : 65000
===============================================================================
===============================================================================
BGP Next Hop
===============================================================================
Next Hop                                                        Pref Owner
   Resolving Prefix                                                  Metric
   Resolved Next Hop                                                 Ref. Count
-------------------------------------------------------------------------------
10.10.10.12                                                     7    ISIS
   10.20.1.1/32                                                      10
   10.10.2.1                                                         592
10.10.10.12                                                     7    ISIS
   10.20.1.2/32                                                      10
   10.10.3.2                                                         592
10.20.1.4                                                       7    ISIS
   10.20.0.0/32                                                      20
   10.10.11.4                                                        8
-------------------------------------------------------------------------------
Next Hops : 3
===============================================================================
A:ALU-12#

*A:ALU-12# show router 6 bgp next-hop 10.0.0.1
===============================================================================
 BGP Router ID : 10.10.10.1        AS : 65000   Local AS : 65000
===============================================================================
===============================================================================
BGP Next Hop
===============================================================================
Next Hop                                                        Pref Owner
   Resolving Prefix                                                  Metric
   Resolved Next Hop                                                 Ref. Count
-------------------------------------------------------------------------------
10.0.0.1                                                        15   ISIS
   10.0.0.0/24                                                       20
   10.88.1.2                                                         8
10.0.0.1                                                        15   ISIS
   10.0.0.0/24                                                       20
   10.88.2.2                                                         8
-------------------------------------------------------------------------------
Next Hops : 1
===============================================================================
A:ALU-12#

*A:ALU-12# show router 6 bgp next-hop 10.0.0.1 detail
===============================================================================
 BGP Router ID : 10.10.10.1        AS : 65000   Local AS : 65000
===============================================================================
===============================================================================
BGP Next Hop
===============================================================================
Next Hop: 10.0.0.1
-------------------------------------------------------------------------------
Resolving Prefix : 10.0.0.0/24
Preference       : 15                   Metric           : 20
Reference Count  : 8                    Owner            : ISIS
Resolved Next Hop: 10.88.1.2
Egress Label     : N/A
Resolved Next Hop: 10.88.2.2
Egress Label     : N/A
Resolved Next Hop: 10.88.3.2
Egress Label     : N/A
-------------------------------------------------------------------------------
Next Hops : 1
===============================================================================
A:ALU-12#

Table 8. BGP Next-Hop Field Descriptions
Label	Description
BGP Router ID	The local BGP router ID
AS	The configured autonomous system number
Local AS	The configured local AS setting. If not configured, then the value is the same as the AS.
Next Hop	The next-hop address
Resolving Prefix	The prefix of the best next hop
Pref: Preference	The BGP preference attribute for the routes
Metric	The metric derived from the IGP for a particular next hop
Reference Count	The number of routes using the resolving prefix
Owner	The routing protocol used to derive the best next hop
Resolved Next Hop	The IP address of the next hop
Egress Label	The VPN label used for VPN-IPv4 data
Next Hops	The number of next hops

paths

Syntax

paths

Context

show>router>bgp

Description

This command displays a summary of BGP path attributes.

Output

The following output is an example of BGP path information, and BGP Path Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 bgp paths
===============================================================================
BGP Router ID : 10.55.55.55 AS : 65000   Local AS : 65000
===============================================================================
===============================================================================
BGP Paths
===============================================================================
Path: No As-Path
-------------------------------------------------------------------------------
Next Hop         : 10.44.10.12
Origin           : Incomplete           Segments         : 0
MED              : None                 Local Preference : 4294967295
Refs             : 1080                 ASes             : 0
Flags            : IBGP-learned
-------------------------------------------------------------------------------
Path: No As-Path
-------------------------------------------------------------------------------
Next Hop         : 10.88.1.2
MED              : 10                   Local Preference : None
Refs             : 4                    ASes             : 0
Flags            : Imported
-------------------------------------------------------------------------------
Path: No As-Path
-------------------------------------------------------------------------------
Next Hop         : 10.44.10.21
Origin           : IGP                  Segments         : 0
MED              : None                 Local Preference : 100
Refs             : 1082                 ASes             : 0
Flags            : IBGP-learned
Cluster          : 10.10.10.12
Originator Id    : 10.10.10.21
-------------------------------------------------------------------------------
Paths : 3
===============================================================================
*A:ALU-12#

Table 9. BGP Path Field Descriptions
Label	Description
BGP Router ID	The local BGP router ID
AS	The configured autonomous system number
Local AS	The configured local AS setting. If not configured, then the value is the same as the AS.
Path	The AS path attribute
Next Hop	The advertised BGP next hop
Origin	EGP: the NLRI is learned by an EGP protocol
	IGP: the NLRI is interior to the originating AS
	Incomplete: NLRI was learned another way
Segments	The number of segments in the AS path attribute
MED	The Multi-Exit Discriminator value
Local Preference	The local preference value. This value is used if the BGP route arrives from a BGP peer without the Local Pref attribute set. It is overridden by any value set via a route policy.
Refs	The number of routes using a specified set of path attributes
ASes	The number of autonomous system numbers in the AS path attribute
Flags	IBGP-learned: path attributes learned by an IBGP peering
Community	The BGP community attribute list
Cluster List	The route reflector cluster list
Originator ID	The originator ID path attribute value

routes

Syntax

routes [ip-prefix/mask | ip-address]

routes aspath-regex reg-exp {detail |longer}

routes aspath-regex reg-exp

routes aspath-regex reg-exp hunt

routes brief

routes community comm-id {detail |longer}

routes community comm-id hunt

routes detail

routes hunt [brief]

routes ipv4 [aspath-regex reg-exp] [community comm-id] [brief] [all]

routes ipv4 [aspath-regex reg-exp] hunt [community comm-id [brief] [all]

routes ipv4 [detail |longer] [aspath-regex reg-exp] [community comm-id] [all]

routes ipv6 [aspath-regex reg-exp] [community comm-id] [brief] [all]

routes ipv6 [aspath-regex reg-exp] hunt [community comm-id] [brief] [all]

routes ipv6 [detail |longer] [aspath-regex reg-exp] [community comm-id] [all]

routes label-ipv4 [aspath-regex reg-exp] [community comm-id] [brief] [all]

routes label-ipv4 [aspath-regex reg-exp] hunt [community comm-id] [brief] [all]

routes label-ipv4 [detail | longer] [aspath-regex reg-exp] [community comm-id] [all]

routes longer

routes mvpn-ipv4 [aspath-regex reg-exp] [community comm-id] [rd rd] [brief] [type mvpn-type] [originator-ip ip-address] [source-ip ipv4 address | ipv6 address] [group-ip ipv4 address | ipv6 address] [source-asas-number]

routes mvpn-ipv4 [aspath-regex reg-exp] hunt [community comm-id] [rd rd] [brief] [type mvpn-type] [originator-ip ip-address] [source-ip ipv4 address | ipv6 address] [group-ip ipv4 address | ipv6 address] [source-asas-number]

routes mvpn-ipv4 [detail |longer] [aspath-regex reg-exp] [community comm-id] [rd rd] [type mvpn-type] [originator-ip ip-address] [source-ip ipv4 address | ipv6 address] [group-ip ipv4 address | ipv6 address] [source-asas-number]

routes route-target [source-as as-number] [brief] [aspath-regex reg-exp] [community comm-id]

routes route-target [rtc-prefix rtc-prefix] [hunt] [brief] [aspath-regex reg-exp] [community comm-id]

routes route-target rtc-prefix rtc-prefix [aspath-regex reg-exp] [community comm-id]

routes route-target [rtc-prefix rtc-prefix] [detail | longer] [aspath-regex reg-exp] [community comm-id]

routes vpn-ipv4 [aspath-regex reg-exp] [community comm-id] [rd rd] [brief]

routes vpn-ipv4 [aspath-regex reg-exp] hunt [community comm-id] [rd rd] [brief]

routes vpn-ipv4 [detail |longer] [aspath-regex reg-exp] [community comm-id] [rd rd]

routes vpn-ipv6 [aspath-regex reg-exp] [community comm-id] [rd rd] [brief]

routes vpn-ipv6 [aspath-regex reg-exp] hunt [community comm-id] [rd rd] [brief]

routes vpn-ipv6 [detail |longer] [aspath-regex reg-exp] [community comm-id] [rd rd]

Context

show>router>bgp

Description

This command displays BGP route information.

When this command is issued without any parameters, the entire BGP routing table displays.

When this command is issued with an IP prefix/mask or IP address, the best match for the parameter displays.

Note: To apply a family filter to the route output of the command, the family name must be specified before all other filtering parameters except for the IP prefix/mask or IP address, which, if present, must be placed before the family name in the command.

Parameters

ip-prefix/mask | ip-address

displays parameters that match the specified IPv4 prefix and mask length or IPv6 address (256 characters maximum)

Values

ip-prefix: a.b.c.d (host bits must be 0)

mask: 0 to 32

ip-address: x:x:x:x:x:x:x:x[-interface]

x:x:x:x:x:x:d.d.d.d[-interface]

interface - 32 chars max, mandatory for link local addresses

x: [0 to FFFF]H

d: [0 to 255]D

aspath-regex reg-exp: displays all routes with an AS path matching the specified regular expression (80 characters maximum)

brief: provides a summarized display of the set of peers to which a BGP route is advertised; this option is only supported when no IP prefix/mask or IP address is specified

community: displays all routes with the specified BGP community; community matching is based only on RIB-In communities, not RIB-Out communities

comm-id

specifies community IDs, in the format as-number1:comm-val1 | ext-comm | well-known-comm

Values


`as-number1`	0 to 65535
`comm-val1`	0 to 65535
`ext-comm`	`type`:`{ip-address`:`comm-val1` \| `as-number1`:`comm-val2` \|`as-number2`:`comm-val1` \| `as-number1`:`val-in-mbps`} `ext:xxyy:ovstate` where `type`: target \| origin \| bandwidth (keywords) `ip-address:` ipv4-address: a.b.c.d ipv6-address: x:x:x:x:x:x:x:x[-`interface`] x:x:x:x:x:x:d.d.d.d[-`interface`] `interface` - 32 chars max, mandatory for link local addresses x: [0 to FFFF]H d: [0 to 255]D
ext:xxyy:ovstate	`xx`: 43 `yy`: 0 `ovstate`: 0, 1, 2 (0 for valid, 1 for not-found, 2 for invalid)
`well-known-comm`	null \| no-export \| no-export-subconfed \| no-advertise (keywords)

group-ip ipv4 address |ipv6 address: displays the group IPv4 or IPv6 address

originator-ip ip-address: displays the originating IPv4 or IPv6 address

source-ip ipv4 address |ipv6 address: displays the source IPv4 or IPv6 address

detail: displays a more detailed version of the output

source-as as-number: displays the source AS number

hunt: displays entries for the specified route in the RIB-In, RIB-Out, and RTM

ipv4: displays only those BGP peers that have the IPv4 family enabled

ipv6: displays only those BGP peers that have the IPv6 family enabled

label-ipv4: displays only those BGP peers for the IPv4 unicast (labeled) address family

longer: displays the specified route and subsets of the route

mvpn-ipv4: displays the BGP peers that are MVPN-IPv4 capable

mvpn-type

the specified MVPN type for which to display information

Values: intra-ad | inter-ad | spmsi-ad | leaf-ad | source-ad | shared-join | source-join

route-target: displays a summary of route target constrained routes for this BGP peer

rtc-prefix rtc-prefix

displays route target constraint prefix information, in the format source-as:{ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val}/prefix-length

Values

ip-addr:

ipv4-address: a.b.c.d

ipv6-address: x:x:x:x:x:x:x:x[-interface] x:x:x:x:x:x:d.d.d.d[-interface] interface - 32 chars max, mandatory for link local addresses x: [0 to FFFF]H d: [0 to 255]D

comm-val: 0 to 65535

2byte-asnumber: 0 to 65535

ext-comm-val: 0 to 4294967295

4byte-asnumber: 0 to 4294967295

prefix-length: 0 to 96

rd rd

displays the route distinguisher value, in the format ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4-byte-asnumber:comm-val

Values

ip-addr:

ipv4-address: a.b.c.d

ipv6-address: x:x:x:x:x:x:x:x[-interface] x:x:x:x:x:x:d.d.d.d[-interface] interface - 32 chars max, mandatory for link local addresses x: [0 to FFFF]H d: [0 to 255]D

comm-val: 0 to 65535

2byte-asnumber: 0 to 65535

ext-comm-val: 0 to 4294967295

4byte-asnumber: 0 to 4294967295

vpn-ipv4: displays the BGP VPN IPv4 routes

vpn-ipv6: displays the BGP VPN IPv6 routes

originator-ip ip-address: filters BGP MVPN routes by the originating router IP address that is found in the intra-AD (auto-discovery) MVPN routes

source-ip ip-address: filters BGP MVPN routes by the source IP address that is found in the source-join, source-AD, or S-PMSI-AD MVPN routes

group-ip ip-address: filters BGP MVPN routes by the multicast group IP address that is found in the source-join, source-AD, or S-PMSI-AD MVPN routes

source-as as-number: filters BGP MVPN routes by source-AS (autonomous system) extended community attribute

Output

The following output is an example of BGP route information, and BGP Route Field Descriptions describes the fields.

Output Example

*A:Sar18 Dut-B# show router bgp routes 10.10.10.5 
===============================================================================
 BGP Router ID:10.20.1.3        AS:100         Local AS:100
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP IPv4 Routes
===============================================================================
Flag  Network                                            LocalPref   MED
      Nexthop (Router)                                   Path-Id     Label
      As-Path
-------------------------------------------------------------------------------
u*>?  10.10.10.0/24                                      None        None
      10.20.1.4                                          None        -
      200 300
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B##


*A:Sar18 Dut-B# show>router>bgp# routes vpn-ipv4 10.10.10.6/32 rd 10.20.1.4:1 hunt
===============================================================================
 BGP Router ID:10.20.1.3        AS:None        Local AS:100
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network        : 10.10.10.6/32
Nexthop        : 10.20.1.4
Route Dist.    : 10.20.1.4:1            VPN Label      : 131070
Path Id        : None
From           : 10.20.1.4
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : int_to_D
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None
Connector      : None
Community      : target:100:100
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 10.20.1.4
Fwd Class      : None                   Priority       : None
Flags          : Used  Valid  Best  Incomplete
Route Source   : Internal
AS-Path        : 106
VPRN Imported  :  1
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show>router>bgp# routes 3FFE::606:609/128 vpn-ipv6 hunt
===============================================================================
 BGP Router ID:10.20.1.3        AS:None        Local AS:100
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv6 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network        : 3FFE::606:609/128
Nexthop        : ::FFFF:A14:104
Route Dist.    : 10.20.1.4:1            VPN Label      : 131070
Path Id        : None
From           : 10.20.1.4
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : int_to_D
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None
Connector      : None
Community      : target:100:100
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 10.20.1.4
Fwd Class      : None                   Priority       : None
Flags          : Used  Valid  Best  Incomplete
Route Source   : Internal
AS-Path        : 106
VPRN Imported  :  1
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show>router>bgp# routes vpn-ipv6 3FFE::606:607 128 rd 10.20.1.4:1
hunt
===============================================================================
 BGP Router ID:10.20.1.3        AS:None        Local AS:100
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv6 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network        : 3FFE::606:607/128
Nexthop        : ::FFFF:A14:104
Route Dist.    : 10.20.1.4:1            VPN Label      : 131070
Path Id        : None
From           : 10.20.1.4
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : int_to_D
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None
Connector      : None
Community      : target:100:100
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 10.20.1.4
Fwd Class      : None                   Priority       : None
Flags          : Used  Valid  Best  Incomplete
Route Source   : Internal
AS-Path        : 106
VPRN Imported  :  1
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show>router>bgp# routes vpn-ipv6 3FFE::606:607/128 rd 10.20.1.4:2 
hunt
===============================================================================
 BGP Router ID:10.20.1.3        AS:None        Local AS:100
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv6 Routes
===============================================================================
No Matching Entries Found
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes hunt 10.10.10.1/32
===============================================================================
 BGP Router ID:10.20.1.3        AS:5000        Local AS:5000
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid 
                 l - leaked, x - stale, > - best, b - backup, p - purge 
Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network        : 10.10.10.1/32
Nexthop        : 10.20.1.1
From           : 10.20.1.1
Res. Nexthop   : 10.20.1.1 (RSVP LSP: 1)
Local Pref.    : 100                    Interface Name : ip-10.10.2.3
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
Community      : No Community Members
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 10.20.1.1
Flags          : Used  Valid  Best  Incomplete
AS-Path        : No As-Path
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes family ipv4
===============================================================================
 BGP Router ID : 10.10.10.103      AS : 200     Local AS : 200
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP Routes
===============================================================================
Flag  Network                             Nexthop         LocalPref  MED
      VPN Label                           As-Path
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes 10.10.10.0/24 detail
=============================================================================== 
BGP Router ID : 10.128.0.161 AS : 65535 Local AS : 65535
=============================================================================== 
Legend -
 Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes : i - IGP, e - EGP, ? - incomplete, > - best
=============================================================================== 
BGP Routes 
=============================================================================== 
Original Attributes 
Network         :       10.10.10.0/24   Nexthop          :     10.20.1.20 
Route Dist.     :       10070:100       VPN Label        :     152784 
From            :       10.20.1.20      Res. Nexthop     :     10.130.0.2 
Local Pref.     :       100 
Aggregator AS   :       none            Aggregator       :     none 
Atomic Aggr.    :       Not Atomic      MED              :     none 
Community       :       target:10070:1
Cluster         :       No Cluster Members 
Originator Id   :       None            Peer Router Id   : 10.20.1.20 
Flags           :       Used Valid Best IGP 
AS-Path         :       10070 {14730} 
Modified Attributes 

Network :10.10.10.0/24 Nexthop :10.20.1.20 
Route Dist.: 10001:100 VPN Label :152560
From :10.20.1.20 Res. Nexthop :10.130.0.2 
Local Pref.:100 
Aggregator AS: none Aggregator:none 
Atomic Aggr.:Not Atomic MED :none 
Community :target:10001:1 
Cluster :No Cluster Members 
Originator Id:None Peer Router Id:10.20.1.20 
Flags :Used Valid Best IGP 
AS-Path :No As-Path 
------------------------------------------------------------------------------- 
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes 10.10.10.0/24 hunt 
===============================================================================
 BGP Router ID : 10.20.1.1   AS : 100Local AS : 100 
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP Routes
===============================================================================
RIB In Entries
-------------------------------------------------------------------------------
Network        : 10.10.10.0/24
Nexthop        : 10.20.1.2
Route Dist.    : 10.20.1.2:1VPN Label: 131070 
From       : 10.20.1.2
Res. Nexthop   : 10.10.1.2
Local Pref.    : 100Interface Name: to-sr7 
Aggregator AS  : noneAggregator: none 
Atomic Aggr.   : Not AtomicMED: none
Community      : target:10.20.1.2:1
Cluster        : No Cluster Members
Originator Id  : NonePeer Router Id: 10.20.1.2
Flags       : Used  Valid  Best  IGP  
AS-Path        : No As-Path
VPRN Imported  : 1 2 10 12
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes mvpn-ipv4
===============================================================================
 BGP Router ID:10.20.1.3        AS:200         Local AS:200
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP MVPN-IPv4 Routes
===============================================================================
Flag  RouteType                   OriginatorIP           LocalPref   MED
          RD                          SourceAS                           VPNLabel
          Nexthop                     SourceIP
          As-Path                     GroupIP
-------------------------------------------------------------------------------
u*>i  Intra-Ad                    10.20.1.4              100         0
          1:1                         -                                  -
          10.20.1.4                   -
          No As-Path                  -
u*>i  Source-Ad                   -                      100         0
          1:1                         -                                  -
          10.20.1.4                   10.100.1.2
          No As-Path                  10.0.0.0
u*>i  Source-Join                 -                      100         0
          1:1                         200                                -
          10.20.1.4                   10.100.1.2
          No As-Path                  10.0.0.0
-------------------------------------------------------------------------------
Routes : 3
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes mvpn-ipv4 brief
===============================================================================
 BGP Router ID:10.20.1.3        AS:200         Local AS:200
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP MVPN-IPv4 Routes
===============================================================================
Flag  RouteType                   OriginatorIP          SourceIP
          RD                          SourceAS              GroupIP
-------------------------------------------------------------------------------
u*>i  Intra-Ad                    10.20.1.4             -
          1:1                         -                     -
u*>i  Source-Ad                   -                      10.100.1.2
          1:1                         -                     10.0.0.0
u* >i  Source-Join                 -                     10.100.1.2
          1:1                         200                   10.0.0.0
-------------------------------------------------------------------------------
Routes : 3
===============================================================================
*A:Sar18 Dut-B# 


*A:Sar18 Dut-B# show router bgp routes mvpn-ipv4 type source-join source-as 200
source-ip 10.100.1.2 group-ip 10.0.0.0 detail
===============================================================================
 BGP Router ID:10.20.1.3        AS:200         Local AS:200
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
 
===============================================================================
BGP MVPN-IPv4 Routes
===============================================================================
Route Type     : Source-Join
Route Dist.    : 1:1
Source AS      : 200
Source IP      : 10.100.1.2
Group IP       : 10.0.0.0
Nexthop        : 10.20.1.4
From           : 10.20.1.4
Res. Nexthop   : 10.0.0.0
Local Pref.    : 100                    Interface Name : NotAvailable
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 0
Community      : target:10.20.1.3:2
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 10.20.1.4
Flags          : Used  Valid  Best  IGP
AS-Path        : No As-Path
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes ipv4 detail
===============================================================================
 BGP Router ID:10.1.1.1          AS:100         Local AS:100
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
Original Attributes

Network        : 10.1.1.1/32
Nexthop        : 192.168.1.1
Path Id        : None
From           : 192.168.1.1
Res. Nexthop   : 192.168.1.1
Local Pref.    : n/a                    Interface Name : net
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 5000
AIGP Metric    : 100     
Community      : None
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 2.2.2.2
Fwd Class      : None                   Priority       : None
Flags          : Used  Valid  Best  Incomplete
Route Source   : External
AS-Path        : 200 400 500

Modified Attributes

Network        : 10.1.1.1/32
Nexthop        : 192.168.1.1
Path Id        : None
From           : 192.168.1.1
Res. Nexthop   : 192.168.1.1
Local Pref.    : None                   Interface Name : net
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 5000
AIGP Metric    : 110
Community      : None
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 2.2.2.2
Fwd Class      : None                   Priority       : None
Flags          : Used  Valid  Best  Incomplete
Route Source   : External
AS-Path        : 200 400 500
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes 10.1.1.1/32 hunt
===============================================================================
 BGP Router ID:1.1.1.1          AS:100         Local AS:100
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network        : 10.1.1.1/32
Nexthop        : 192.168.1.1
Path Id        : None
From           : 192.168.1.1
Res. Nexthop   : 192.168.1.1
Local Pref.    : None                   Interface Name : net
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 5000
AIGP Metric    : 110
Community      : None
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 2.2.2.2
Fwd Class      : None                   Priority       : None
Flags          : Used  Valid  Best  Incomplete
Route Source   : External
AS-Path        : 200 400 500
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
Network        : 10.1.1.1/32
Nexthop        : 10.1.1.1
Path Id        : None
To             : 10.3.3.3
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : NotAvailable
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 5000
AIGP Metric    : 150
Community      : None
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 10.3.3.3
Origin         : Incomplete
AS-Path        : 200 400 500
-------------------------------------------------------------------------------
Routes : 2
===============================================================================
*A:Sar18 Dut-B#


*A:Sar18 Dut-B# show router bgp routes 
===============================================================================
 BGP Router ID:10.20.1.1        AS:1           Local AS:1          
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP IPv4 Routes
===============================================================================
Flag  Network                                            LocalPref     MED
      Nexthop                                              Path-Id      Label
      As-Path                                                                 
-------------------------------------------------------------------------------
u*>i  10.0.0.1/32                                        100         2010
      10.20.1.2                                             None        131057
      2       
ub*i  10.0.0.1/32                                        100         2010
      10.20.1.3                                             None        131067
      2
-------------------------------------------------------------------------------
Routes : 2
===============================================================================
*A:Sar18 Dut-B#

*A:Sar18 Dut-B# show router bgp routes vpn-ipv4 community target:10.100.100.100:2
hunt
===============================================================================
BGP Router ID:10.20.1.6        AS:62000       Local AS:62000      
===============================================================================
Legend -
Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge 
                 l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes  : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP VPN-IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network        : 10.1.1.1/32
Nexthop        : 10.20.1.6
Route Dist.    : 10.100.100.100:2       VPN Label      : 131068
Path Id        : None                   
From           : 10.20.1.5
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : system
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : target:10.100.100.100:2
Cluster        : 5.5.5.5
Originator Id  : 10.20.1.6              Peer Router Id : 10.20.1.5
Flags          : Invalid  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h00m06s              
VPRN Imported  : None
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
Network        : 10.1.1.1/32
Nexthop        : 10.20.1.6
Route Dist.    : 10.100.100.100:2       VPN Label      : 131068
Path Id        : None                   
To             : 10.20.1.5
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : NotAvailable
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None                   
Connector      : None
Community      : target:10.100.100.100:2
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 10.20.1.5
Origin         : IGP                    
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
-------------------------------------------------------------------------------
Routes : 2
===============================================================================
*A:Sar18 Dut-B#

*A:Sar18 Dut-B# show router bgp routes  vpn-
ipv6 community target:10.100.100.100:2 hunt
===============================================================================
 BGP Router ID:10.20.1.3        AS:61000       Local AS:61000      
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge
 Origin codes  : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP VPN-IPv6 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network        : 3ffe::100:0/109
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 1:1234                 VPN Label      : 131067
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 0:0 target:10.100.100.100:2 target:1:123456
                 origin:10.100.100.100:2
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  3  1
 
Network        : 3ffe::101:100/120
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 1:1234                 VPN Label      : 131067
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 0:0 target:10.100.100.100:2 target:1:123456
                 origin:10.100.100.100:2
Cluster        : 10.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  3  1
 
Network        : 3ffe::101:100/123
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 1:1234                 VPN Label      : 131067
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 0:0 target:10.100.100.100:2 target:1:123456
                 origin:10.100.100.100:2
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  3  1
 
Network        : 3ffe::300:0/104
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 1:1234                 VPN Label      : 131067
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 0:0 target:10.100.100.100:2 target:1:123456
                 origin:123456:2
Cluster        : 10.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  3  1
 
Network        : 3ffe::303:300/120
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 1:1234                 VPN Label      : 131067
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 0:0 target:100.100.100.100:2 target:1:123456
                 origin:123456:2
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  3  1
 
Network        : ::/0
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 10.100.100.100:2      VPN Label      : 131069
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : target:10.100.100.100:2 origin:100.100.100.100:2
                 origin:1:123456
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m42s              
VPRN Imported  :  1
 
Network        : 3ffe::100:0/104
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 10.100.100.100:2      VPN Label      : 131069
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 100:100 2:3 target:10.100.100.100:2
                 origin:1:123456 origin:1:2
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m42s              
VPRN Imported  :  1
 
Network        : 3ffe::101:0/112
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 10.100.100.100:2      VPN Label      : 131069
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 10:100 2:3 target:10.100.100.100:2
                 origin:10.100.100.100:2 origin:1:123456 origin:1:2
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  1
 
Network        : 3ffe::202:202/128
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 10.100.100.100:2       VPN Label      : 131069
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 0:0 target:10.100.100.100:2
                 origin:10.100.100.100:2 origin:1:123456
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  1
 
Network        : ::/0
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 123456:2               VPN Label      : 131068
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : target:10.100.100.100:2 origin:10.100.100.100:2
                 origin:1:123456
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  1
 
Network        : 3ffe::100:0/104
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 123456:2               VPN Label      : 131068
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 10:100 2:3 target:10.100.100.100:2
                 origin:1:123456 origin:1:2
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  1
 
Network        : 3ffe::101:0/112
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 123456:2               VPN Label      : 131068
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 10:100 2:3 target:10.100.100.100:2
                 origin:10.100.100.100:2 origin:1:123456 origin:1:2
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  1
 
Network        : 3ffe::202:202/128
Nexthop        : ::ffff:10.20.1.1
Route Dist.    : 123456:2               VPN Label      : 131068
Path Id        : None                   
From           : 10.20.1.2
Res. Nexthop   : n/a
Local Pref.    : 100                    Interface Name : toA
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : 100
AIGP Metric    : None                   
Connector      : None
Community      : 0:0 target:100.100.100.100:2
                 origin:100.100.100.100:2 origin:1:123456
Cluster        : 2.2.2.2
Originator Id  : 10.20.1.1              Peer Router Id : 10.20.1.2
Flags          : Used  Valid  Best  IGP  
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0                      
Neighbor-AS    : N/A
Add Paths Send : Default                
Last Modified  : 00h03m41s              
VPRN Imported  :  1
 
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 13
===============================================================================
*A:Sar18 Dut-B#

Table 10. BGP Route Field Descriptions
Label	Description
BGP Router ID	The local BGP router ID
AS	The configured autonomous system number
Local AS	The configured local AS setting. If not configured, the value is the same as the AS.
Flag/Flags	Legend: Status codes: u - used s - suppressed h - history d - decayed * - valid If an * is not present, the status is invalid l - leaked x - stale > - best b - backup p - purge Origin codes: i - IGP e - EGP ? - incomplete > - best
Network	The IP prefix and mask length
Nexthop	The BGP next hop
AS-Path	The BGP AS path attribute
Local Pref.	The local preference value. This value is used if the BGP route arrives from a BGP peer without the Local Pref attribute set. It is overridden by any value set via a route policy.
MED	The MED metric value
MED	none: MED metrics are not present
VPN Label	The label generated by the PE label manager
Original Attributes	The received BGP attributes of a route from a peer without any modification from any policy
Modified Attributes	The final BGP attributes of a route after the policies evaluation
Route Dist.	The route distinguisher identifier attached to routes that distinguishes the VPN it belongs to
From	The advertising BGP neighbor IP address
Res. Nexthop	The resolved next hop
Aggregator AS	The aggregator AS value
Aggregator AS	none: aggregator AS attributes are not present
Aggregator	The aggregator attribute value
Aggregator	none: aggregator attributes are not present
Atomic Aggr.	Atomic: the atomic aggregator flag is set
Atomic Aggr.	Not Atomic: the atomic aggregator flag is not set
Community	The BGP community attribute list
Cluster	The route reflector cluster list
Originator Id	The originator ID path attribute value
Originator Id	none: the originator ID attribute is not present
Peer Router Id	The router ID of the advertising router
TieBreakReason	The step in the BGP decision process where a BGP route lost the tiebreaker with the next BGP route for the same prefix LocalPref — this route is not the best because the next better route has a higher LOCAL_PREF AIGP — this route is not the best because the next better route has a lower derived AIGP metric value ASPathLen — this route is not the best because the next better route has a shorter AS PATH length Origin — this route is not the best because the next better route has a lower origin value MED — this route is not the best because the next better route has a lower MED, and MED comparison of the routes was allowed IBGP — this IBGP route is not the best because the next better route is an EBGP route NHCost — this route is not the best because the next better route has a lower metric value to reach the BGP NEXT HOP BGPID — this route is not the best because the next better route has a lower originator ID or BGP identifier ClusterLen — this route is not the best because the next better route has a shorter cluster list length PeerIP — this route is not the best because the next better route has a lower neighbor IP address
VPRN Imported	The VPRNs where a particular BGP-VPN received route has been imported and installed

summary

Syntax

summary [all]

summary [family family] [neighbor ip-address]

Context

show>router>bgp

Description

This command displays a summary of BGP neighbor information.

If confederations are not configured, that portion of the output will not display.

The ‟State” field displays the global BGP operational state. The valid values are:

Up — BGP global process is configured and running
Down — BGP global process is administratively shut down and not running
Disabled — BGP global process is operationally disabled. The process must be restarted by the operator.

For example, if a BGP peer is operationally disabled, then the state in the summary table shows the state ‛Disabled’.

Parameters

all: displays BGP peers in all instances

family

the type of routing information to be distributed by the BGP instance

Values

ipv4, vpn-ipv4, ipv6, vpn-ipv6, mvpn-ipv4, label-ipv4

ipv4, ipv6 — displays only those BGP peers that have the IPv4 or IPv6 family enabled

label-ipv4 — displays only those BGP peers that have the IPv4 unicast (labeled) family enabled

vpn-ipv4, vpn-ipv6 — displays the BGP peers that are IPv4-VPN capable or IPv6-VPN capable

mvpn-ipv4 — displays the BGP peers that are MVPN-IPv4 capable

ip-address

clears damping information for entries received from the BGP neighbor

Values

ipv4-address: a.b.c.d

ipv6-address: x:x:x:x:x:x:x:x[-interface] x:x:x:x:x:x:d.d.d.d[-interface] interface - 32 chars max, mandatory for link local addresses x: [0 to FFFF]H d: [0 to 255]D

Output

The following output is an example of BGP summary information, and BGP Summary Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 bgp summary
===============================================================================
BGP Router ID : 10.55.55.1        AS : 65000   Local AS : 65000
===============================================================================
BGP Admin State         : Up          BGP Oper State              : Up
Total Peer Groups       : 1           Total Peers                 : 1
Total BGP Paths         : 74          Total Path Memory           : 9128
Total IPv4 Remote Rts   : 600         Total IPv4 Rem. Active Rts  : 563
Total Supressed Rts     : 0           Total Hist. Rts             : 0
Total Decay Rts         : 0
Total VPN Peer Groups   : 0           Total VPN Peers             : 0
Total VPN Local Rts     : 8672
Total VPN-IPv4 Rem. Rts : 8656        Total VPN-IPv4 Rem. Act. Rts: 8656
Total VPN Supp. Rts     : 0           Total VPN Hist. Rts         : 0
Total VPN Decay Rts     : 0
===============================================================================
BGP Summary
===============================================================================
Neighbor
                   AS PktRcvd InQ  Up/Down   State|Rcv/Act/Sent (Addr Family)
                      PktSent OutQ
-------------------------------------------------------------------------------
10.44.10.12
                65000     654    0 04h11m01s 600/563/569 (IPv4)
                          557    0           8656/8656/8672 (VpnIPv4)
===============================================================================
*A:ALU-12#

*A:ALU-12# show router 6 bgp summary all
===============================================================================
BGP Summary
===============================================================================
Neighbor
ServiceId          AS PktRcvd InQ  Up/Down   State|Rcv/Act/Sent (Addr Family)
                      PktSent OutQ
-------------------------------------------------------------------------------
10.44.10.12
Def. Instance   65000     662    0 04h14m52s 600/563/569 (IPv4)
                          564    0           8656/8656/8672 (VpnIPv4)
===============================================================================
*A:ALU-12#

*A:7705_ALU-2>show>router>bgp# summary neighbor 10.44.10.12
===============================================================================
BGP Router ID : 10.44.10.1        AS : 65000   Local AS : 65000
===============================================================================
BGP Admin State         : Up          BGP Oper State              : Up
Total Peer Groups       : 1           Total Peers                 : 1
Total BGP Paths         : 74          Total Path Memory           : 9128
Total IPv4 Remote Rts   : 600         Total IPv4 Rem. Active Rts  : 563
Total Supressed Rts     : 0           Total Hist. Rts             : 0
Total Decay Rts         : 0

Total VPN Peer Groups   : 0           Total VPN Peers             : 0
Total VPN Local Rts     : 8672
Total VPN-IPv4 Rem. Rts : 8656        Total VPN-IPv4 Rem. Act. Rts: 8656
Total VPN Supp. Rts     : 0           Total VPN Hist. Rts         : 0
Total VPN Decay Rts     : 0

===============================================================================
BGP Summary
===============================================================================
Neighbor
                   AS PktRcvd InQ  Up/Down   State|Rcv/Act/Sent (Addr Family)
                      PktSent OutQ
-------------------------------------------------------------------------------
10.44.10.12
                65000     673    0 04h20m24s 600/563/569 (IPv4)
                          575    0           8656/8656/8672 (VpnIPv4)
===============================================================================
*A:ALU-12#

*A:ALU-12# show router 6 bgp summary family ipv4
===============================================================================
BGP Router ID : 10.44.10.1        AS : 65000   Local AS : 65000
===============================================================================
BGP Admin State         : Up          BGP Oper State              : Up
Total Peer Groups       : 1           Total Peers                 : 1
Total BGP Paths         : 74          Total Path Memory           : 9128
Total IPv4 Remote Rts   : 600         Total IPv4 Rem. Active Rts  : 563
Total Supressed Rts     : 0           Total Hist. Rts             : 0
Total Decay Rts         : 0

Total VPN Peer Groups   : 0           Total VPN Peers             : 0
Total VPN Local Rts     : 8672
Total VPN-IPv4 Rem. Rts : 8656        Total VPN-IPv4 Rem. Act. Rts: 8656
Total VPN Supp. Rts     : 0           Total VPN Hist. Rts         : 0
Total VPN Decay Rts     : 0
===============================================================================
BGP IPv4 Summary
===============================================================================
Neighbor
                   AS PktRcvd PktSent  InQ OutQ Up/Down   State|Recv/Actv/Sent
-------------------------------------------------------------------------------
10.44.10.12
                65000     679     581    0    0 04h23m36s 600/563/569
===============================================================================
*A:ALU-12#

Table 11. BGP Summary Field Descriptions
Label	Description
BGP Router ID	The local BGP router ID
AS	The configured autonomous system number
Local AS	The configured local AS setting. If not configured, then the value is the same as the AS.
BGP Admin State	Down: BGP is administratively disabled
BGP Admin State	Up: BGP is administratively enabled
BGP Oper State	Down: BGP is operationally disabled
BGP Oper State	Up: BGP is operationally enabled
Total Peer Groups	The total number of configured BGP peer groups
Total Peers	The total number of configured BGP peers
Total BGP Paths	The total number of unique sets of BGP path attributes learned from BGP peers
Total Path Memory	The total amount of memory used to store the path attributes
Total IPv4 Remote Rts	The total number of IPv4 routes learned from BGP peers
Total IPv4 Remote Act. Rts	The total number of IPv4 routes used in the forwarding table
Total Supressed Rts	The total number of suppressed routes due to route damping
Total Hist. Rts	The total number of routes with history due to route damping
Total Decay Rts	The total number of decayed routes due to route damping
Total VPN Peer Groups	The total number of configured VPN peer groups
Total VPN Peers	The total number of configured VPN peers
Total VPN Local Rts	The total number of configured local VPN routes
Total VPN-IPv4 Rem. Rts	The total number of configured remote VPN-IPv4 routes
Total VPN-IPv4 Rem. Act. Rts	The total number of active remote VPN-IPv4 routes used in the forwarding table
Total VPN Supp. Rts	The total number of suppressed VPN routes due to route damping
Total VPN Hist. Rts	The total number of VPN routes with history due to route damping
Total VPN Decay Rts	The total number of decayed routes due to route damping
Neighbor	The BGP neighbor address
AS (Neighbor)	The BGP neighbor autonomous system number
PktRcvd	The total number of packets received from the BGP neighbor
PktSent	The total number of packets sent to the BGP neighbor
InQ	The number of BGP messages to be processed
OutQ	The number of BGP messages to be transmitted
Up/Down	The amount of time that the BGP neighbor has either been established or not established depending on its current state
State\|Recv/Actv/Sent (Addr Family)	The BGP neighbor’s current state (if not established) or the number of received routes, active routes and sent routes (if established), along with the address family

servers

Syntax

servers [all]

Context

show>router>dhcp

show>router>dhcp6

Description

This command lists the local DHCP or DHCPv6 servers.

Parameters

all: displays DHCP or DHCPv6 servers in all instances

Output

The following output is an example of DHCP server information, and DHCP or DHCPv6 Server Field Descriptions describes the fields.

Output Example

*A:ALU-1# show router dhcp servers
===============================================================================
Overview of DHCP Servers
===============================================================================
Active Leases:      1
Maximum Leases:     4096


Router              Server                                Admin State
-------------------------------------------------------------------------------
Router: Base        dhcpServer1                           inService
Service: 102        vprnServer                            inService
===============================================================================
*A:ALU-1#

Table 12. DHCP or DHCPv6 Server Field Descriptions
Label	Description
Active Leases	The number of active leases
Maximum Leases	The maximum number of leases available
Router	The name of the router
Server	The name of the DHCP or DHCPv6 server
Admin State	The administrative state of the DHCP or DHCPv6 server

statistics

Syntax

statistics [interface ip-int-name | ip-address]

Context

show>router>dhcp

show>router>dhcp6

Description

This command displays statistics for DHCP Relay and DHCPv6 Relay.

If no interface name or IP address is specified, then all configured interfaces are displayed. If the statistics command is used in the dhcp6 context, the interface name or IP address cannot be specified.

Parameters

ip-int-name | ip-address: displays statistics for the specified IP interface

Output

The following outputs are examples of DHCP or DHCPv6 statistics information:

DHCP statistics (Output Example, DHCP Statistics Field Descriptions)
DHCPv6 statistics (Output Example, DHCPv6 Statistics Field Descriptions)

Output Example

*A:ALU-1# show router dhcp statistics
================================================================
DHCP Global Statistics (Router: Base)
================================================================
Rx Packets                           : 0
Tx Packets                           : 0
Rx Malformed Packets                 : 0
Rx Untrusted Packets                 : 0
Client Packets Discarded             : 0
Client Packets Relayed               : 0
Server Packets Discarded             : 0
Server Packets Relayed              :0
================================================================
*A:ALU-1#

Table 13. DHCP Statistics Field Descriptions
Label	Description
DHCP Global Statistics (Router: Base)
Rx Packets	The number of packets received
Tx Packets	The number of packets transmitted
Rx Malformed Packets	The number of malformed packets received
Rx Untrusted Packets	The number of untrusted packets received
Client Packets Discarded	The number of packets from the DHCP client that were discarded
Client Packets Relayed	The number of packets from the DHCP client that were forwarded
Server Packets Discarded	The number of packets from the DHCP server that were discarded
Server Packets Relayed	The number of packets from the DHCP server that were forwarded

Output Example

*A:ALU-1# show router dhcp6 statistics
==========================================================================
DHCP6 statistics (Router: Base)
==========================================================================
Msg-type                      Rx             Tx             Dropped
--------------------------------------------------------------------------
1 SOLICIT                     0              0              0
2 ADVERTISE                   0              0              0
3 REQUEST                     0              0              0
4 CONFIRM                     0              0              0
5 RENEW                       0              0              0
6 REBIND                      0              0              0
7 REPLY                       0              0              0
8 RELEASE                     0              0              0
9 DECLINE                     0              0              0
10 RECONFIGURE                0              0              0
11 INFO_REQUEST               0              0              0
12 RELAY_FORW                 0              0              0
13 RELAY_REPLY                0              0              0

--------------------------------------------------------------------------
Dhcp6 Drop Reason Counters :
--------------------------------------------------------------------------
 1 Dhcp6 oper state is not Up on src itf                         0
 2 Dhcp6 oper state is not Up on dst itf                         0
 3 Relay Reply Msg on Client Itf                                 0
 4 Hop Count Limit reached                                       0
 5 Missing Relay Msg option, or illegal msg type                 0
 6 Unable to determine destination client Itf                    0
 7 Out of Memory                                                 0
 8 No global Pfx on Client Itf                                   0
 9 Unable to determine src Ip Addr                               0
10 No route to server                                            0
11 Subscr. Mgmt. Update failed                                   0
12 Received Relay Forw Message                                   0
13 Packet too small to contain valid dhcp6 msg                   0
14 Server cannot respond to this message                         0
15 No Server Id option in msg from server                        0
16 Missing or illegal Client Id option in client msg             0
17 Server Id option in client msg                                0
18 Server DUID in client msg does not match our own              0
19 Client sent message to unicast while not allowed              0
20 Client sent message with illegal src Ip address               0
21 Client message type not supported in pfx delegation           0
22 Nbr of addrs or pfxs exceeds allowed max (128) in msg         0
23 Unable to resolve client's mac address                        0
24 The Client was assigned an illegal address                    0
25 Illegal msg encoding                                          0
==========================================================================
*A:ALU-1#

Table 14. DHCPv6 Statistics Field Descriptions
Label	Description
DHCP6 Statistics (Router: Base)
Msg-type	The number of messages received, transmitted, or dropped by the router for each message type
Dhcp6 Drop Reason Counters	The number of times that a message was dropped for a particular reason

summary

Syntax

summary

Context

show>router>dhcp

show>router>dhcp6

Description

This command displays a summary of DHCP and DHCPv6 configuration.

Output

The following outputs are examples of DHCP or DHCPv6 summary information:

DHCP summary (Output Example, DHCP Summary Field Descriptions )
DHCPv6 summary (Output Example, DHCPv6 Summary Field Descriptions )

Output Example

*A:ALU-48# show router dhcp summary
===============================================================================
DHCP Summary (Router: Base)
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
vprn_interface                   No       0/0                   Keep    Down
  sap:1/5/2                               0/0
-------------------------------------------------------------------------------
Interfaces: 1
===============================================================================
*A:ALU-48#

Table 15. DHCP Summary Field Descriptions
Label	Description
DHCP Summary (Router: Base)
Interface Name SapId/Sdp	The name of the interface or SAP/SDP identifier
Arp Populate	Specifies whether ARP populate is enabled or disabled
Used/Provided	Used — number of lease-states that are currently in use on the specified interface; that is, the number of clients on the interface that got an IP address by DHCP. This number is always less than or equal to the ‟Provided” field.
Used/Provided	Provided — lease-populate value configured for the specified interface
Info Option	Keep — the existing information is kept on the packet and the router does not add any additional information
	Replace — on ingress, the existing information-option is replaced with the information-option from the router
	Drop — the packet is dropped and an error is logged
Admin State	The administrative state
Interfaces	The total number of DHCP interfaces

Output Example

*A:ALU-48# show router dhcp6 summary
===============================================================================
DHCP6 Summary (Router: Base)
===============================================================================
Interface Name                   Nbr      Used/Max Relay     Admin  Oper Relay
  SapId                          Resol.   Used/Max Server    Admin  Oper Server
-------------------------------------------------------------------------------
iesSap                           No          0/0             Down   Down
  sap:1/2/3:801                              0/8000          Down   Down
iesintf                          No          0/0             Down   Down
  sdp:spoke-5:9999                           0/8000          Down   Down
-------------------------------------------------------------------------------
Interfaces: 2
===============================================================================
*A:ALU-48#

Table 16. DHCPv6 Summary Field Descriptions
Label	Description
DHCP Summary (Router: Base)
Interface Name SapId	The name of the interface or SAP/SDP identifier
Nbr Resol.	Yes — neighbor resolution (discovery) is enabled
Nbr Resol.	No — neighbor resolution (discovery) is disabled
Used/Max Relay:	Used — number of relay routes currently being used on the interface
Used/Max Relay:	Max Relay — maximum number of relay routes on the interface
Used/Max Server	Used — number of server routes currently being used on the interface
Used/Max Server	Max Server — maximum number of server routes currently being used on the interface
Admin	The administrative state
Oper Relay	The operating state of the relay routes
Oper Server	The operating state of the server routes
Interfaces	The total number of DHCPv6 interfaces

interface

Syntax

interface [{[ip-address | ip-int-name] [detail]}] | [summary] | [exclude-services]

Context

show>router

Description

This command displays the router IP interface table sorted by interface index.

Parameters

ip-address: the IP address of the interface for which to display information

ip-int-name: the IP interface name for which to display information

detail: displays detailed IP interface information for the router

summary: displays summary IP interface information for the router

exclude-services: displays IP interface information, excluding IP interfaces configured for customer services. Only core network IP interfaces are displayed.

Output

The following output is an example of standard IP interface information, and IP Interface Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 interface
===============================================================================
Interface Table (Service: 6)
===============================================================================
Interface-Name                   Adm         Opr(v4/v6)  Mode    Port/SapId
   IP-Address                                                    PfxState
-------------------------------------------------------------------------------
vprn_interface                   Up          Down/Down   VPRN    1/5/2
   -                                                             -
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:ALU-12#

Table 17. IP Interface Field Descriptions
Label	Description
Interface Table (Service: x)
Interface-Name	The name of the interface
IP-Address	The IP address of the interface
Adm	The administrative state of the interface
Opr (v4/v6)	The operational state of the interface (only ipv4 addresses apply)
Type	The service type
Port/SapId PfxState	The port or SAP associated with the interface

msdp

Syntax

msdp

Context

show>router

Description

This command enables the context to display MSDP information.

group

Syntax

group [group-name] [detail]

Context

show>router>msdp

Description

This command displays information about MSDP groups.

Parameters

group-name: displays information about the specified group. If no group-name is specified, information about all groups is displayed.

detail: displays detailed MSDP group information

Output

The following output is an example of MSDP group information, and MSDP Group Field Descriptions describes the fields.

Output Example

*A:ALA-48>show router 100 msdp group
===============================================================================
MSDP Groups
===============================================================================
Group Name                        Mode        Act Srcs  Local Address          
-------------------------------------------------------------------------------
main                              Mesh-group  None      None       
loop1                             Mesh-group  None      None                   
loop2                             Mesh-group  None      None                   
loop3                             Mesh-group  None      None                   
loop4                             Mesh-group  None      None                   
loop5                             Mesh-group  None      None                   
-------------------------------------------------------------------------------
Groups : 6
=======================
*A:ALA-48>show router 100 msdp 


*A:ALA-48>show router 100 msdp group test
===============================================================================
MSDP Groups
===============================================================================
Group Name                        Mode       Act Srcs  Local Address
-------------------------------------------------------------------------------
test                              Mesh-group 50000     10.10.10.103
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:ALA-48>showrouter 100 msdp#


*A:ALA-48>show>router 100 msdp# group test detail
===============================================================================
MSDP Groups
===============================================================================
Group Name         : test
-------------------------------------------------------------------------------
Local Address      : 10.10.10.103
Admin State        : Up                 Receive Msg Rate   : None
Receive Msg Time   : None               Receive Msg Thd    : None
Mode               : Mesh-group         SA Limit           : 50000
Export Policy      : None Specified / Inherited
Import Policy      : None Specified / Inherited

-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:ALA-48>show router 100 msdp

Table 18. MSDP Group Field Descriptions
Label	Description
Group Name	Displays the MSDP group name
Mode	Displays the mode of peers in the group, either Mesh-group or Standard
Act Srcs	Displays the configured maximum number of SA messages that will be accepted by MSDP
Local Address	Displays the local end of an MSDP session
Admin State	Displays the administrative state
Receive Msg Rate	Displays the rate that the messages are read from the TCP session
Receive Msg Time	Displays the time interval in which the number of MSDP messages set by the receive-msdp-msg-rate `number` parameter are read from the TCP session
Receive Msg Thd	Displays the configured threshold for the number of MSDP messages that can be processed before the MSDP message rate-limiting function is activated
SA Limit	Displays the SA message limit
Export Policy	Displays whether an export policy is configured or inherited
Import Policy	Displays whether an import policy is configured or inherited

peer

Syntax

peer [ip-address] [group group-name] [detail]

Context

show>router>msdp

Description

This command displays information about an MSDP peer.

Parameters

ip-address: displays information about the peer with the specified IP address. If no IP address is specified, information about all MSDP peers is displayed.

group-name: displays information about peers in the specified group. If no group-name is specified, information about all MSDP peers display is displayed.

detail: displays detailed MSDP peer information

Output

The following output is an example of MSDP peer information, and MSDP Peer Field Descriptions describes the fields.

Output Example

A:ALA-48# show router 100 msdp peer
=============================================================================
MSDP Peers
=============================================================================
Peer             Local Address    State       Last State Change     SA Learnt
-----------------------------------------------------------------------------
10.20.1.1        10.20.1.6        Established 08/30/2002 03:22:13   1008    
-----------------------------------------------------------------------------
Peers : 1
=============================================================================
A:ALA-48# 


A:ALA-48# show router 100 msdp peer detail
===============================================================================
MSDP Peers
-------------------------------------------------------------------------------
Peer Address       : 10.20.1.1                                                
-------------------------------------------------------------------------------
Group Name         : None                                                     
Local Address      : 10.20.1.6                                                
Last State Change  : 08/30/2002 03:22:13 Last Act Src Limit : N/A
Peer Admin State   : Up                 Default Peer       : No               
Peer Connect Retry : 0                  State              : Established      
SA accepted        : 1008               SA received        : 709              
State timer expires: 18                 Peer time out      : 62               
Active Source Limit: None               Receive Msg Rate   : 0                
Receive Msg Time   : 0                  Receive Msg Thd    : 0                
Auth Status        : Disabled           Auth Key           : None             
Export Policy      : None Specified / Inherited
Import Policy      : None Specified / Inherited
-------------------------------------------------------------------------------
Peers : 1
===============================================================================
A:ALA-48#

Table 19. MSDP Peer Field Descriptions
Label	Description
Peer	Displays the IP address of the peer
Local Address	Displays the local IP address
State	Displays the current state of the peer
Last State Change	Displays the date and time of the peer’s last state change
SA Learnt	Displays the number of SAs learned through a peer

source

Syntax

source [ip-address/mask] [type {configured | dynamic | both}] [detail]

Context

show>router>msdp

Description

This command displays the discovery method for the specified multicast source. By default, all user-created sources are displayed.

Parameters

ip-address/mask

specifies the IP address and mask for a multicast source

Values

ip-address is in the format a.b.c.d

mask range is from 1 to 32

configured: displays user-created sources

dynamic: displays dynamically created sources

both: displays both user-configured and dynamically created sources

detail: displays detailed MSDP source information

Output

The following output is an example of MSDP source information and MSDP Source Field Descriptions describes the fields.

Output Example

*A:7705:Dut-C# show  router 100 msdp source 
===============================================================================
MSDP Sources
===============================================================================
Source             Type         SA Limit   Num Excd   Last Exceeded
-------------------------------------------------------------------------------
3.3.3.3/32         Configured   None       0          N/A
-------------------------------------------------------------------------------
Sources : 1
===============================================================================
*A:7705:Dut-C#

Table 20. MSDP Source Field Descriptions
Label	Description
Source	Displays the IP address of the MSDP peer
Type	Displays the type of peer
SA Limit	Displays the local IP address
Num Excd	Displays the number of times the global active source limit has been exceeded
Last Exceeded	Displays the date and time of the last state change of the peer

source-active

Syntax

source-active [{group ip-address | local | originator ip-address | peer ip-address | source ip-address | group ip-address source ip-address}] [detail]

Context

show>router>msdp

Description

This command displays source-active (SA) messages accepted by MSDP.

Parameters

group ip-address: displays information about the specified group IP address

local: displays information about local SA messages

originator ip-address: displays information about the specified originator IP address

peer ip-address: displays information about the specified peer IP address

source ip-address: displays information about the specified source IP address

detail: displays detailed MSDP SA information

Output

The following output is an example of accepted MSDP SA messages information, and MSDP SA Field Descriptions describes the fields.

Output Example

A:ALA-48# show router 100 msdp source-active
===============================================================================
MSDP Source Active Info
===============================================================================
Grp Address      Src Address      Origin RP        Peer Address State Timer
-------------------------------------------------------------------------------
10.100.0.0       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.1       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.2       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.3       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.4       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.5       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.6       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.7       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.8       10.112.1.2      10.20.1.1        10.20.1.1    69        
10.100.0.9       10.112.1.2      10.20.1.1        10.20.1.1    69        
-------------------------------------------------------------------------------
MSDP Source Active : 10
===============================================================================
A:ALA-48# 


A:ALA-48# show router 100 msdp source-active detail
===============================================================================
MSDP Source Active
===============================================================================
Group Address      : 10.100.0.0         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 3d 01:44:25      
Group Address      : 10.100.0.1         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 10.100.0.2         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 228.100.0.3        Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 10.100.0.4         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 10.100.0.5         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 10.100.0.6         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 10.100.0.7         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 10.100.0.8         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
Group Address      : 10.100.0.9         Source Address     : 10.112.1.2      
Origin RP          : 10.20.1.1          Peer Address       : 10.20.1.1        
State Timer        : 64                 Up Time            : 48d 18:22:29     
-------------------------------------------------------------------------------
MSDP Source Active : 10
===============================================================================
A:ALA-48#

Table 21. MSDP SA Field Descriptions
Label	Description
Grp Address	Displays the IP address of the group
Src Address	Displays the IP address of the source
Origin RP	Displays the originating rendezvous point (RP) address
Peer Address	Displays the IP address of the peer
State Timer	Displays the state timeout value. If the value reaches 0, the SA entry is removed.

source-active-rejected

Syntax

source-active-rejected [peer-group name] [group ip-address] [source ip-address] [originator ip-address] [peer ip-address]

Context

show>router>msdp

Description

This command displays SA messages rejected by MSDP.

Parameters

name: displays information about rejected SA messages for the specified peer group

group ip-address: displays information about the specified group IP address

source ip-address: displays information about the source address of the source-active entry that is rejected

originator ip-address: displays information about the specified originator IP address

peer ip-address: displays information about the peer from which this rejected source-active entry was last received

Output

The following output is an example of rejected MSDP SA messages information, and MSDP Source-Active Field Descriptions describes the fields.

Output Example

*A:ALA-48# show router 100 msdp source-active-rejected
===============================================================================
MSDP Source Active Rejected Info
===============================================================================
Grp Address     Src Address     Origin RP       Peer Address    Reject Reason
-------------------------------------------------------------------------------
10.100.0.1      10.0.0.1        10.20.0.1       10.0.0.1        Import Policy
10.100.0.2      10.0.0.2        10.20.0.2       10.0.0.2        Export Policy
10.100.0.3      10.0.0.3        10.20.0.3       10.0.0.3        RPF Failure
10.100.0.4      10.0.0.4        10.20.0.4       10.0.0.4        Limit Exceeded
10.100.0.5      10.0.0.5        10.20.0.5       10.0.0.5        Limit Exceeded
10.100.0.6      10.0.0.6        10.20.0.6       10.0.0.6        Limit Exceeded
10.100.0.7      10.0.0.7        10.20.0.7       10.0.0.7        Limit Exceeded
-------------------------------------------------------------------------------
SA Rejected Entries : 7
===============================================================================
*A:ALA-48#

Table 22. MSDP Source-Active Field Descriptions
Label	Description
Grp Address	Displays the IP address of the group
Src Address	Displays the IP address of the source
Origin RP	Displays the originating rendezvous point (RP) address
Peer Address	Displays the address of the peer
Reject Reason	Displays the reason why this SA entry is rejected

statistics

Syntax

statistics [peer ip-address]

Context

show>router>msdp

Description

This command displays statistics information related to an MSDP peer.

Parameters

ip-address: displays statistics for the peer with the specified IP address

Output

The following output is an example of MSDP statistics information, and MSDP Statistics Field Descriptions describes the fields.

Output Example

A:ALA-48# show router 100 msdp statistics
===============================================================================
MSDP Statistics
===============================================================================
Glo ActSrc Lim Excd: 0                                                        
-------------------------------------------------------------------------------
Peer Address       : 10.20.1.1                                                
-------------------------------------------------------------------------------
Last State Change  : 0d 11:33:16        Last message Peer  : 0d 00:00:17      
RPF Failures       : 0                  Remote Closes      : 0                
SA Msgs Sent       : 0                  SA Msgs Recvd      : 709              
SA req. Msgs Sent  : 0                  SA req. Msgs Recvd : 0                
SA res. Msgs Sent  : 0                  SA res. Msgs Recvd : 0                
KeepAlive Msgs Sent: 694                KeepAlive Msgs Recd: 694              
Unknown Msgs Sent  : 0                  Error Msgs Recvd   : 0                
-------------------------------------------------------------------------------
Peers : 1
===============================================================================
A:ALA-48#

Table 23. MSDP Statistics Field Descriptions
Label	Description
Glo ActSrc Lim Excd	Displays the number of global active source messages that exceed the configured limit
Peer Address	Displays the address of the MSDP peer
Last State Change	Displays the date and time the peer state changed
Last message Peer	Displays the time the last message was received from the peer
RPF Failures	Displays the number of reverse path forwarding (RPF) failures
Remote Closes	Displays the number of times the remote peer closed
SA Msgs Sent	Displays the number of SA messages sent
SA Msgs Recvd	Displays the number of SA messages received
SA req. Msgs Sent	Displays the number of SA request messages sent
SA req. Msgs Recvd	Displays the number of SA request messages received
SA res. Msgs Sent	Displays the number of SA response messages sent
SA res. Msgs Recvd	Displays the number of SA response messages received
KeepAlive Msgs Sent	Displays the number of keepalive messages sent
KeepAlive Msgs Recd	Displays the number of keepalive messages received
Unknown Msgs Sent	Displays the number of unknown messages sent
Error Msgs Recvd	Displays the number of error messages received

status

Syntax

status

Context

show>router>msdp

Description

This command displays MSDP status information.

Output

The following output is an example of MSDP status information, and MSDP Status Field Descriptions describes the fields.

Output Example

A:ALA-48# show router 100 msdp status 
===============================================================================
MSDP Status
===============================================================================
Admin State                       : Up 
Local Address                     : None 
Global Statistics
Active Src Limit                  : None                                      
Act Src Lim Excd                  : 0                                         
Num. Peers                        : 1                                         
Num. Peers Estab                  : 1                                         
Num. Source Active                : 10 
Policies                          : None
Data Encapsulation                : Enabled 
Receive Msg Rate
Rate                              : 0                                         
Time                              : 0                                         
Threshold                         : 0 
Last Msdp Enabled                 : 08/30/2002 03:21:43
===============================================================================
A:ALA-48#

Table 24. MSDP Status Field Descriptions
Label	Description
Admin State	Displays the administrative state
Local Address	Displays the local IP address
Global Statistics	Displays global MSDP statistics
Active Src Limit	Displays the active source limit
Act Src Lim Excd	Displays the number of times that the active source limit was exceeded
Num. Peers	Displays the number of peers
Num. Peers Estab	Displays the number of peers established
Num. Source Active	Displays the number of active sources
Policies	Specifies the policy used to export the SA state from the SA list into MSDP
Data Encapsulation	Specifies whether the rendezvous point (RP) encapsulates multicast data received in MSDP register messages inside forwarded MSDP SA messages
Rate	The receive message rate
Time	The receive message interval
Threshold	The number of MSDP messages that can be processed before the MSDP message rate-limiting function is activated
Last Msdp Enabled	The time the last MSDP was triggered

route-table

Syntax

route-table [family] [ip-prefix[/prefix-length] [longer | exact | protocol protocol-name] [all]] [next-hop-type type] [alternative]

route-table [family] summary

route-table [family] [ip-prefix[/prefix-length]] [longer | exact | protocol protocol-name] extensive [all]

Context

show>router

Description

This command displays the active routes in the routing table.

If no command line arguments are specified, all routes are displayed, sorted by prefix.

The following adapter cards and platforms support the full IPv6 subnet range for IPv6 static routes:

6-port Ethernet 10Gbps Adapter card
8-port Gigabit Ethernet Adapter card, version 2 and version 3
2-port 10GigE (Ethernet) Adapter card (on the v-port)
10-port 1GigE/1-port 10GigE X-Adapter card
7705 SAR-X

For these cards and platforms, the supported route range for statically provisioned or dynamically learned routes is from /1 to /128.

For all other cards, modules, and ports (including the v-port on the 2-port 10GigE (Ethernet) module), the supported range for statically provisioned or dynamically learned routes is from /1 to /64 or is /128 (indicating a host route).

Parameters

family

specifies the type of routing information to be distributed by this peer group

Values

ipv4 — displays the routes that have the IPv4 family enabled, excluding IP-VPN routes

ipv6 — displays the routes that are IPv6-capable, including IPv6 static routes

mcast-ipv4 — displays the routes that are IPv4 multicast-capable

mcast-ipv6 — displays the routes that are IPv6 multicast-capable

ip-prefix/prefix-length

displays only those entries matching the specified IP prefix and prefix length

Values

ipv4-prefix a.b.c.d (host bits must be 0)

ipv4-prefix-length 0 to 32

ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

ipv6-prefix-length {0 to 128} | {0 to 64 | 128}

longer: displays routes matching the ip-prefix/prefix-length and routes with longer masks

exact: displays the exact route matching the ip-prefix/prefix-length masks

protocol-name

displays routes learned from the specified protocol

Values: bgp, bgp-vpn, isis, local, ospf, rip, static, aggregate, vpn-leak, managed

all: displays all routes, including inactive routes

type: displays tunneled next-hop information

alternative: displays LFA and backup route details

extensive: displays extensive route table information

summary: displays route table summary information

Output

The following outputs are examples of routing table information:

standard route table information (Output Example, Standard Route Table Field Descriptions )
extensive route table information (Output Example, Route Table Extensive Field Descriptions)
LFA and backup route table information (Output Example, LFA and Backup Route Table Field Descriptions )

Output Example

*A:ALU# show router route-table
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags]                             Type    Proto    Age         Pref
       Next Hop[Interface Name]                                     Metric
-------------------------------------------------------------------------------
0.0.0.0/0                                     Remote  Static    00h00m03s  5
       upLink                                                       1
10.1.1.1/32                                   Local   Local    35d08h00m   0
       system                                                       0
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: n = Number of times nexthop is repeated
       Backup = BGP backup route
       LFA = Loop-Free Alternate nexthop
       S = Sticky ECMP requested
===============================================================================
*A:Sar18 Dut-B>show>router#

*A:ALU-A# show router route-table protocol ospf
===============================================================================
Route Table  (Router: Base)                                             
===============================================================================
Dest Prefix[Flags]                           Type    Proto    Age        Pref
       Next Hop[Interface Name]                                     Metric 
-------------------------------------------------------------------------------
10.10.0.1/32                                  Remote  OSPF    65844        10 
       10.10.13.1                                                      0     
-------------------------------------------------------------------------------
Flags: n = Number of times nexthop is repeated
       Backup = BGP backup route
       LFA = Loop-Free Alternate nexthop
       S = Sticky ECMP requested
===============================================================================
*A:Sar18 Dut-B>show>router#

Table 25. Standard Route Table Field Descriptions
Label	Description
Dest Prefix	The route destination address and mask
[Flags]	n — Number of times nexthop is repeated Backup — BGP backup route LFA — Loop-free alternate next hop S — Sticky ECMP requested
Next Hop	The next-hop IP address for the route destination
Type	Local — the route is a local route
Type	Remote — the route is a remote route
Protocol	The protocol through which the route was learned
Age	The route age in seconds for the route
Metric	The route metric value for the route
Pref	The route preference value for the route
No. of Routes	The number of routes displayed in the list
[Flags]	n — Number of times nexthop is repeated Backup — BGP backup route LFA — Loop-free alternate next hop S — Sticky ECMP requested

Output Example

*A:7705:Dut-C#  show router 10 route-table 200.0.0.1 32 extensive
===============================================================================
Route Table (Service: 10)
===============================================================================
Dest Prefix             : 200.0.0.1/32
  Protocol              : OSPF
  Age                   : 00h01m53s
  Preference            : 150
  Next-Hop              : 10.1.1.1
    Interface           : iftoA-1
    QoS                 : Priority=n/c, FC=n/c
    Source-Class        : 0
    Dest-Class          : 0
    Metric              : 1001
    ECMP-Weight         : 1
  Next-Hop              : 10.1.2.1
    Interface           : iftoA-2
    QoS                 : Priority=n/c, FC=n/c
    Source-Class        : 0
    Dest-Class          : 0
    Metric              : 1001
    ECMP-Weight         : 1
  Next-Hop              : 10.1.3.1
    Interface           : iftoA-3
    QoS                 : Priority=n/c, FC=n/c
    Source-Class        : 0
    Dest-Class          : 0
    Metric              : 1001
    ECMP-Weight         : 5
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
*A:7705:Dut-C#

Table 26. Route Table Extensive Field Descriptions
Label	Description
Dest Prefix	The destination prefix of the LSP tunnel
Protocol	The routing protocol used by the route table
Age	The age of the LSP tunnel
Preference	The route preference value
Next-Hop	The next-hop address for the route destination
Interface	The next-hop interface name
QoS	The next-hop QoS type
Source-Class	The next-hop source class value
Dest-Class	The next-hop destination class value
Metric	The next-hop metric value
ECMP-Weight	The next-hop ECMP weight value
No. of Destinations	The total number of next-hop destinations

Output Example

*A:ALU# show router route-table alternative
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags]                            Type    Proto    Age         Pref
       Next Hop[Interface Name]                                  Metric
       Alt-NextHop                                              Alt-
                                                               Metric
-------------------------------------------------------------------------------
10.10.1.0/24                                  Local   Local    00h07m52s   0
       ip-10.10.1.1                                                 0
10.10.2.0/24                                  Local   Local    00h07m48s   0
       ip-10.10.2.1                                                 0
10.10.4.0/24                                  Remote  ISIS     00h07m38s   15
       10.10.1.2                                                    20
10.10.5.0/24                                  Remote  ISIS     00h07m38s   15
       10.10.2.3                                                    20
10.10.9.0/24                                  Remote  ISIS     00h07m28s   15
       10.10.1.2                                                    30
       10.20.1.5 (LFA) (tunneled:RSVP:3)                            50
10.10.10.0/24                                 Remote  ISIS     00h04m40s   15
       10.20.1.5 (tunneled:RSVP:3)                                  30
10.20.1.1/32                                  Local   Local    00h07m55s   0
       system                                                       0
10.20.1.2/32                                  Remote  ISIS     00h07m47s   15
       10.10.1.2                                                    10
10.20.1.3/32                                  Remote  ISIS     00h07m38s   15
       10.10.2.3                                                    10
10.20.1.4/32                                  Remote  ISIS     00h07m38s   15
       10.10.1.2                                                    20
       10.20.1.5 (LFA) (tunneled:RSVP:3)                            40      
10.20.1.5/32                                  Remote  ISIS     00h04m40s   15
       10.20.1.5 (tunneled:RSVP:3)                                  20
10.20.1.6/32                                  Remote  ISIS     00h07m28s   15
       10.10.1.2                                                    30
       10.10.2.3 (LFA)                                              30
-------------------------------------------------------------------------------
No. of Routes: 12
Flags: n = Number of times nexthop is repeated
       Backup = BGP backup route
       LFA = Loop-Free Alternate nexthop
       S = Sticky ECMP requested
===============================================================================
*A:ALU-A#

Table 27. LFA and Backup Route Table Field Descriptions
Label	Description
Dest Prefix[Flags]	The route destination address and mask, and flags (if applicable)
Next Hop	The next hop IP address for the route destination
Type	Local — the route is a local route
Type	Remote — the route is a remote route
Proto	The protocol through which the route was learned
Age	The route age in seconds for the route
Metric	The route metric value for the route
Pref	The route preference value for the route
No. of Routes	The number of routes displayed in the list
Alt-NextHop	The backup next hop
Alt-Metric	The metric of the backup route

sgt-qos

Syntax

sgt-qos

Context

show>router

Description

This command displays QoS information about self-generated traffic.

Parameters

service-id

specifies the service identifier of the service

Values: 1 to 2147483647 or service-name

application

Syntax

application [app-name] [dscp | dot1p]

Context

show>router>sgt-qos

Description

This command displays application QoS settings.

Parameters

app-name

the specified application

Values

arp, bgp, cflowd, dhcp, dns, ftp, icmp, igmp, isis, ldp, mld, ndis, ntp, ospf, pim, ptp, radius, rip, rsvp, snmp, snmp-notification, ssh, syslog, tacplus, telnet, tftp, traceroute, vrrp

Note:

PTP in the context of SGT QoS is defined as Precision Timing Protocol and is an application in the 7705 SAR. The PTP application name is also used in areas such as event-control and logging. Precision Timing Protocol is defined in IEEE 1588-2008.
PTP in the context of IP filters is defined as Performance Transparency Protocol. IP protocols can be used as IP filter match criteria; the match is made on the 8-bit protocol field in the IP header.

dscp: specifies to show all DSCP applications

dot1p: specifies to show all dot1p applications

Output

The following output is an example of application QoS information, and Application QoS Field Descriptions describes the fields.

Output Example

*A:ALU-1>show# router 6 sgt-qos application
===============================================================================
DSCP Application Values
===============================================================================
Application         DSCP Value                    Default DSCP Value
-------------------------------------------------------------------------------
bgp                 none                          none
dhcp                none                          none
dns                 none                          none
ftp                 none                          none
icmp                none                          none
igmp                none                          none
ldp                 none                          none
mld                 none                          none
ndis                none                          none
ntp                 none                          none
ospf                none                          none
pim                 none                          none
ptp                 none                          none
radius              none                          none
rip                 none                          none
rsvp                none                          none
snmp                none                          none
snmp-notification   none                          none
ssh                 none                          none
syslog              none                          none
tacplus             none                          none
telnet              none                          none
tftp                none                          none
traceroute          none                          none
ptp                 none                          none
vrrp                none                          none
===============================================================================

===============================================================================
Dot1p Application Values
===============================================================================
Application         Dot1p Value                   Default Dot1p Value
-------------------------------------------------------------------------------
arp                 none                          none
isis                none                          none
===============================================================================
*A:ALU-1>show#

Table 28. Application QoS Field Descriptions
Label	Description
Application	The DSCP or dot1p application
DSCP Value	The DSCP name or value assigned to the application; if you assign a value to the application (0 to 63), the DSCP name that maps to the value is displayed
Default DSCP Value	The default DSCP value
Dot1p Value	The dot1p priority assigned to the application (applies only to ARP and IS-IS)
Default Dot1p Value	The default dot1p value

dscp-map

Syntax

dscp-map [dscp-name]

Context

show>router>sgt-qos

Description

This command displays the DSCP-to-FC mappings.

Parameters

dscp-name

the specified DSCP name.

Values: be | ef | cp1 | cp2 | cp3 | cp4 | cp5 | cp6 | cp7 | cp9 | cs1 | cs2 | cs3 | cs4 | cs5 | nc1 | nc2 | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cp11 | cp13 | cp15 | cp17 | cp19 | cp21 | cp23 | cp25 | cp27 | cp29 | cp31 | cp33 | cp35 | cp37 | cp39 | cp41 | cp42 | cp43 | cp44 | cp45 | cp47 | cp49 | cp50 | cp51 | cp52 | cp53 | cp54 | cp55 | cp57 | cp58 | cp59 | cp60 | cp61 | cp62 | cp63

Output

The following output is an example of DSCP-to-FC mapping information, and DSCP-to-FC Mapping Field Descriptions describes the fields.

Output Example

A:ALU-1# show router 6 sgt-qos dscp-map
===============================================================================
DSCP to FC Mappings
===============================================================================
DSCP Value          FC Value            Default FC Value
-------------------------------------------------------------------------------
be                  nc                  nc
cp1                 be                  be
cp2                 be                  be
cp3                 be                  be
cp4                 be                  be
cp5                 be                  be
cp6                 be                  be
cp7                 be                  be
cs1                 be                  be
cp9                 be                  be
af11                af                  af
cp11                be                  be
af12                af                  af
cp13                be                  be
af13                af                  af
cp15                be                  be
cs2                 be                  be
cp17                be                  be
af21                l1                  l1
cp19                be                  be
af22                l1                  l1
cp21                be                  be
af23                l1                  l1
cp23                be                  be
cs3                 be                  be
cp25                be                  be
af31                l1                  l1
cp27                be                  be
af32                l1                  l1
cp29                be                  be
af33                l1                  l1
cp31                be                  be
cs4                 be                  be
cp33                be                  be
af41                nc                  nc
cp35                be                  be
af42                af                  h2
cp37                be                  be
af43                h2                  h2
cp39                be                  be
cs5                 be                  be
cp41                be                  be
cp42                be                  be
cp43                be                  be
cp44                be                  be
cp45                be                  be
ef                  ef                  ef
cp47                be                  be
nc1                 nc                  nc
cp49                be                  be
cp50                h2                  h2
cp51                be                  be
cp52                be                  be
cp53                be                  be
cp54                be                  be
cp55                be                  be
nc2                 nc                  nc
cp57                be                  be
cp58                be                  be
cp59                be                  be
cp60                be                  be
cp61                be                  be
cp62                be                  be
cp63                be                  be
===============================================================================
A:ALU-1#

Table 29. DSCP-to-FC Mapping Field Descriptions
Label	Description
DSCP Value	The DSCP values (displayed as names) of the self-generated traffic
FC Value	The FC value mapped to each DSCP value
Default FC Value	The default FC value

static-arp

Syntax

static-arp [ip-address | ip-int-name | mac ieee-mac-addr]

Context

show>router

Description

This command displays the router static ARP table sorted by IP address.

If no options are present, all ARP entries are displayed.

Parameters

ip-address: the IP address for which static ARP entries are displayed

ip-int-name: the interface name for which static ARP entries are displayed

ieee-mac-addr: the MAC address for which static ARP entries are displayed

Output

The following output is an example of static ARP table information, and Static ARP Table Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 static-arp
===============================================================================
ARP Table (Service: 6)
===============================================================================
IP Address      MAC Address       Expiry    Type   Interface
-------------------------------------------------------------------------------
10.200.0.253    00:00:5a:40:00:01 00:00:00  Sta    to-ser1
12.200.1.1      00:00:5a:01:00:33 00:00:00  Inv    to-ser1a
------------------------------------------------------------------------------
No. of ARP Entries: 2
==============================================================================

Table 30. Static ARP Table Field Descriptions
Label	Description
IP Address	The IP address of the static ARP entry
MAC Address	The MAC address of the static ARP entry
Expiry	The age of the ARP entry. Static ARPs always have 00:00:00 for the age.
Type	Inv—the ARP entry is an inactive static ARP entry (invalid)
Type	Sta—the ARP entry is an active static ARP entry
Interface	The IP interface name associated with the ARP entry
No. of ARP Entries	The number of ARP entries displayed in the list

static-route

Syntax

static-route [family] [ip-prefix/prefix-length] | preference preference | next-hop ip-address | tag tag] [detail]

Context

show>router

Description

This command displays the static entries in the routing table.

If no options are present. all static routes are displayed sorted by prefix.

The following adapter cards and platforms support the full IPv6 subnet range for IPv6 static routes:

6-port Ethernet 10Gbps Adapter card
8-port Gigabit Ethernet Adapter card, version 2 and version 3
2-port 10GigE (Ethernet) Adapter card (on the v-port)
10-port 1GigE/1-port 10GigE X-Adapter card
7705 SAR-X

For these cards and platforms, the supported route range for statically provisioned or dynamically learned routes is from /1 to /128.

For all other cards, modules, and ports (including the v-port on the 2-port 10GigE (Ethernet) module), the supported range for statically provisioned or dynamically learned routes is from /1 to /64 or is /128 (indicating a host route).

Parameters

family

displays only the static routes with the specified family

Values: ipv4, ipv6, mcast-ipv4, or mcast-ipv6

ip-prefix/prefix-length

displays only the static routes matching the specified IP prefix and mask

Values

ipv4-prefix a.b.c.d (host bits must be 0)

ipv4-prefix-length 0 to 32

Values

ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

ipv6-prefix-length {0 to 128} | {0 to 64 | 128}

preference

displays static routes with the specified route preference

Values: 0 to 65535

ip-address

only displays static routes with the specified next-hop IP address

Values

ipv4-address a.b.c.d (host bits must be 0)

ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

tag

displays the 32-bit integer tag added to the static route. The tag is used in route policies to control distribution of the route into other protocols.

Values: 0 to 4294967295

detail: displays detailed information about the static route

Output

The following output is an example of static route information, and Static Route Field Descriptions describes the fields.

Output Example

*A:ALU-12# show router 6 static-route
===============================================================================
Static Route Table (Service: 6)  Family: IPv4
===============================================================================
Prefix                                        Tag         Met    Pref Type Act
   Next Hop                                    Interface
-------------------------------------------------------------------------------
192.168.250.0/24                                           1     5    NH    Y
    10.200.10.1                                to-ser1
192.168.252.0/24                                           1     5    NH    N
    10.10.0.254                                n/a   
-------------------------------------------------------------------------------
No. of Static Routes: 5
====================================================================================
*A:ALU-12#

*A:Sar18 Dut-B>show>router# static-route detail
===============================================================================
Static Route Table (Service: 12)  Family: IPv4
===============================================================================
Prefix           : 10.1.1.1/32
Nexthop          : 10.1.1.1
Type             : Nexthop
Interface        : toA                             Active            : Y
Prefix List      : n/a                             Prefix List Type  : n/a
Metric           : 1                               Preference        : 5
Admin  State     : Up                              Tag               : 0
Creation Origin  : manual
BFD              : disabled
CPE-check        : disabled
LDP Sync         : disabled
-------------------------------------------------------------------------------
Prefix           : 10.1.1.3/32
Nexthop          : 10.1.1.2
Type             : Indirect
Interface        : n/a                             Active            : N
Prefix List      : n/a                             Prefix List Type  : n/a
Metric           : 44                              Preference        : 22
Admin  State     : Down                            Tag               : 55
Creation Origin  : manual
BFD              : disabled
CPE-check        : disabled
Tunnel Resolution: disabled                        Disallow-IGP      : disabled
RSVP-TE Tunnels  : disabled                        LDP Tunnels       : disabled
SR-ISIS Tunnels  : disabled                        SR-OSPF Tunnels   : disabled
SR-TE Tunnels    : disabled
Inactive Reason  : VPRN admin disabled
-------------------------------------------------------------------------------
Prefix           : 10.1.1.3/32
Nexthop          : n/a
Type             : Blackhole
Interface        : n/a                             Active            : N
Prefix List      : n/a                             Prefix List Type  : n/a
Metric           : 1                               Preference        : 5
Admin  State     : Down                            Tag               : 0
Creation Origin  : manual
BFD              : disabled
CPE-check        : disabled
Inactive Reason  : VPRN admin disabled
-------------------------------------------------------------------------------
Prefix           : 10.1.1.3/32
Nexthop          : 10.1.1.1
Type             : Indirect
Interface        : n/a                             Active            : N
Prefix List      : n/a                             Prefix List Type  : n/a
Metric           : 1                               Preference        : 5
Admin  State     : Down                            Tag               : 0
Creation Origin  : manual
BFD              : disabled
CPE-check        : disabled
Tunnel Resolution: disabled                        Disallow-IGP      : disabled
RSVP-TE Tunnels  : disabled                        LDP Tunnels       : disabled
SR-ISIS Tunnels  : disabled                        SR-OSPF Tunnels   : disabled
SR-TE Tunnels    : disabled
Inactive Reason  : VPRN admin disabled
-------------------------------------------------------------------------------
Prefix           : 10.1.1.3/32
Nexthop          : n/a
Type             : Nexthop
Interface        : toSar8                          Active            : N
Prefix List      : n/a                             Prefix List Type  : n/a
Metric           : 1                               Preference        : 5
Admin  State     : Down                            Tag               : 0
Creation Origin  : manual
BFD              : disabled
CPE-check        : disabled
LDP Sync         : disabled
Inactive Reason  : VPRN admin disabled
-------------------------------------------------------------------------------
No. of Static Routes: 5
===============================================================================
*A:Sar18 Dut-B>show>router#

Table 31. Static Route Field Descriptions
Label	Description
Prefix	The static route destination address and mask
Next Hop Nexthop	The next hop for the static route destination
Tag	The 32-bit integer tag added to the static route
Met Metric	The route metric value for the static route
Pref Preference	The route preference value for the static route
Type	BH—the static route is a blackhole route, where the next hop for this type of route is black-hole
	ID—the static route is an indirect route, where the next hop for this type of route is the non-directly connected next hop
	NH—the route is a static route with a directly connected next hop
	GRT—the route is a static route for the GRT next hop
	IPSec—the route is a static route for the IPSec tunnel next hop
Act Active	N—the static route is inactive; for example, the static route is disabled or the next-hop IP interface is down
Act Active	Y—the static route is active
Interface	The egress IP interface name for the static route n/a — indicates there is no current egress interface because the static route is inactive or a blackhole route
Prefix List	Identifies the prefix list used for this static route
Prefix List Type	Identifies the type of prefix list used for this static route
Admin State	The administrative state for this static route
Creation Origin	The method by which the static route was created: manual or automatic (dynamic)
BFD	The BFD state for this static route (enabled or disabled)
CPE-check	The configured state of CPE check for this static route (enabled or disabled)
Tunnel Resolution	n/a
Disallow-IGP	n/a
RSVP-TE Tunnels	n/a
LDP Tunnels	n/a
SR-ISIS Tunnels	n/a
SR-OSPF Tunnels	n/a
SR-TE Tunnels	n/a
Inactive Reason	Indicates the reason for the static route being inactive
No. of Static Routes:	The number of static routes displayed in the list

tunnel-table

Syntax

tunnel-table summary [ipv4 | ipv6]

tunnel-table [protocol protocol] {ipv4 | ipv6}

tunnel-table [ip-prefix[/mask]] [alternative] [ipv4 | ipv6] detail

tunnel-table [ip-prefix[/mask]] [alternative]

tunnel-table [ip-prefix[/mask]] protocol protocol [detail]

tunnel-table [ip-prefix[/mask]] sdp sdp-id

Context

show>router

Description

This command displays tunnel table information.

If the auto-bind-tunnel command is used when configuring a VPRN service, it means that the MP-BGP next-hop resolution is referring to the core routing instance for IP reachability. For a VPRN service, the next hop specifies the lookup to be used by the routing instance if no SDP to the destination exists.

Parameters

ip-prefix[/mask]

displays the specified tunnel table destination IP address and mask

Values

ipv4-prefix: a.b.c.d

ipv4-prefix-length: [0..30]

ipv6-prefix: x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D

ipv6-prefix-length: [0 to 126]

protocol

displays protocol information

Values: bgp, ldp, rsvp, sdp, ospf, isis, sr-te, fpe

sdp-id

displays information pertaining to the specified SDP

Values: 1 to 17407

summary: displays summary tunnel table information

detail: displays detailed tunnel table information

alternative: displays backup route details

ipv4: displays information for IPv4 entries only

ipv6: displays information for IPv6 entries only

Output

The following output is an example of tunnel table information, and Tunnel Table Field Descriptions describes the fields.

Output Example

*A:Sar18 Dut-B>show>router# tunnel-table summary
===============================================================================
Tunnel Table Summary (Router: Base)
===============================================================================
                              Active                   Available
-------------------------------------------------------------------------------
LDP                           1                        1
SDP                           1                        1
RSVP                          0                        0
BGP                           0                        0
MPLS-TP                       0                        0
ISIS                          0                        0
OSPF                          0                        0
SR-TE                         0                        0
FPE                           0                        0
-------------------------------------------------------------------------------
Total                         2                        2
===============================================================================
*A:Sar18 Dut-B>show>router#

A:Sar18 Dut-B>show>router# tunnel-table
===============================================================================
IPv4 Tunnel Table (Router: Base)
===============================================================================
Destination       Owner     Encap TunnelId  Pref     Nexthop        Metric
-------------------------------------------------------------------------------
10.1.1.1/32       sdp       MPLS  1000      5        10.1.1.1        0
10.1.1.1/32       ldp       MPLS  65537     9        10.1.1.1       1
-------------------------------------------------------------------------------
Flags: B = BGP backup route available
       E = inactive best-external BGP route
===============================================================================
*A:Sar18 Dut-B>show>router#

*A:Sar18 Dut-B>show>router# tunnel-table detail
===============================================================================
Tunnel Table (Router: Base)
===============================================================================
Destination      : 10.1.1.1/32
NextHop          : 10.1.1.1
Tunnel Flags     : (Not Specified)
Age              : 26d21h16m
CBF Classes      : (Not Specified)
Owner            : sdp                  Encap            : MPLS
Tunnel ID        : 1000                 Preference       : 5
Tunnel Label     :  -                   Tunnel Metric    : 0
Tunnel MTU       : 1546                 Max Label Stack  : 1
-------------------------------------------------------------------------------
Destination      : 10.1.1.1/32
NextHop          : 10.1.1.1
Tunnel Flags     : (Not Specified)
Age              : 26d21h16m
CBF Classes      : (Not Specified)
Owner            : ldp                  Encap            : MPLS
Tunnel ID        : 65537                Preference       : 9
Tunnel Label     : 131071               Tunnel Metric    : 1
Tunnel MTU       : 1550                 Max Label Stack  : 1
-------------------------------------------------------------------------------
Number of tunnel-table entries          : 2
Number of tunnel-table entries with LFA : 0
===============================================================================
*A:Sar18 Dut-B>show>router#

*A:Sar18 Dut-B>show>router# tunnel-table ipv6 protocol isis
===============================================================================
IPv6 Tunnel Table (Router: Base)
===============================================================================
Destination                                 Owner     Encap TunnelId   Pref
Nexthop                                                     Metric
-------------------------------------------------------------------------------
No Matching Entries.
-------------------------------------------------------------------------------
Flags: B = BGP backup route available
       E = inactive best-external BGP route
===============================================================================
*A:Sar18 Dut-B>show>router#

Table 32. Tunnel Table Field Descriptions
Label	Description
Destination	The route destination address and mask
Owner	The tunnel owner (protocol)
Encap	The tunnel encapsulation type
Tunnel ID	The tunnel (SDP) identifier
Pref Preference	The route preference for routes learned from the configured peers
Nexthop	The next hop for the route destination
Metric	The route metric value for the route
CBF Classes	n/a
Tunnel Flags	The tunnel flags
Tunnel Label	The tunnel label
Tunnel Metric	The tunnel metric
Tunnel MTU	The tunnel MTU
Max Label Stack	The maximum label stack depth
Age	The tunnel age (that is, how long the tunnel has been operational)