Procedures for port configuration


To configure 1830 VWM ports

To configure Ethernet LAN ports on the 1830 VWM OSU and 1830 VWM SMM

To configure connector ports and breakout ports

To configure Ethernet ports

To configure LLDP-MED

To configure LLDP MED Network Policy

To configure a cellular port on a 7705 SAR-Hm

To configure a WLAN port on a 7705 SAR-Hm

To change the port mode

To migrate SAPs from access mode to hybrid mode

To configure the NFM-P to retain non-default port MTU values

To copy or move L2 SAPs between ports

To copy or move L2 access interface SAPs between services

To move L3 SAPs within or between ports or LAGs on the same NE

To move L3 subscriber interface SAPs between ports on the same NE

To configure bandwidth CAC on an access SAP for services or a LAG

To add a queue group to an Ethernet port

To configure queue group scheduler overrides

To configure SONET ports

To configure an HSMDA override

To configure TDM DS3 ports

To configure serial ports

To configure PW ports

To configure a 7210 SAS-M channelized TDM DS1 or E1 port

To assign QoS policies to a 7210 SAS Ethernet port

To create a 7210 SAS SHG

To configure a virtual Ethernet port on a 7705 SAR 2-port ring MDA

To configure Ethernet Bandwidth Notification on a 7705 SAR Ethernet port

To configure PoE ports on a 7210 SAS

To enable or disable hardware timestamps for ports on the 7210 SAS

To configure MAC or VLAN authentication

To configure PoE ports on a 7705 SAR

To configure GPS on a 7705 SAR

To configure a 7705 SAR ASAP channelized TDM port

To configure a channelized TDM DS1 or E1 port

To configure OmniSwitch Ethernet ports

To configure OmniSwitch PoE Ports

To create and configure Xconnect anchor ports

To configure PXC loopback ports