VPRN service management procedures
Workflow to create a VPRN service
To view the VPRN service operational status
To modify a VPRN service using the topology view
To configure DNS for a VPRN site
To configure QoS for self-generated traffic on a VPRN site
To configure NTP on a VPRN site
To configure PTP on a VPRN site
To configure GTP on a VPRN site
To configure an SNMP community on a VPRN site
To configure IGMP host tracking on a VPRN site
To configure an override source IP address on a VPRN site
To configure unequal ECMP on a VPRN site
To enable routing protocols on a VPRN site
To configure ISIS, L2TP, MLD, OSPFv2, OSPFv3, PIM, RIP, or WPP on a VPRN routing instance
To configure BGP on a VPRN routing instance
To configure IGMP on a VPRN routing instance
To configure MSDP on a VPRN routing instance
To configure a routing instance on a VPRN site
To configure a VRF instance on a VPRN site
To configure an MVPN VRF instance on a VPRN site
To configure a BGP confederation on a VPRN site
To configure a GSMP group on a VPRN site
To configure a GNE site and GNE service interface on a VPRN service
To configure a RADIUS proxy server on a VPRN site
To configure a local DHCPv4 server on a VPRN site
To configure a local DHCPv6 server on a VPRN site
To clear DHCP leases from a VPRN site local DHCP server
To configure TCP MSS adjustment on a VPRN site
To configure a group interface on a VPRN
To create a bonding group interface on a VPRN
To configure a SAP on a VPRN group interface
To configure LAG per-link hashing on a VPRN group interface SAP
To add an IGMP interface to a VPRN
To add an IGMP group interface to a VPRN
To add an IP mirror interface to a VPRN
To configure a network interface on a VPRN site
To add a PIM interface to a VPRN
To implement dual homing using SRRP
To configure a subscriber interface on a VPRN
To force a WLAN GW switchover to standby management on a VPRN subscriber interface
To add a TMS interface to a VPRN
To configure VRF import and export policies on a VPRN site
To configure a policy to reserve an RT and RD range for VPRN services
To automatically assign RT policies and RD configuration to VPRN sites
To configure a network ingress filter policy on a VPRN site
To configure ingress QoS policies on a VPRN site
To configure a system-wide alternate source IP address for GRE encapsulation
To bind a VPRN site to service tunnels
To configure static routes on a VPRN site
To configure route aggregates on a VPRN site
To enable a tunnel facility MEP on the VPRN site
To enable the automatic selection of a route distinguisher on a VPRN site
To add a Global Route Table to a VPRN site
To create an OSPF sham link between two VPRN sites
To reserve route targets for specific VPRN services
To configure a VXLAN termination on a VPRN
To configure WLAN GW functionality on a VPRN site
To configure a WLAN GW for a VPRN group interface
To resync WLAN GW tunnels on a VPRN site
To configure a VPRN spoke SDP binding
To create an L2 SDP spoke termination on a VPRN service
To configure an MPLS-TP static pseudowire on a VPRN spoke SDP binding
To configure BFD on a VPRN spoke SDP binding
To clear BFD sessions and statistics on a VPRN spoke SDP binding
To view the BFD session status on a VPRN SDP spoke binding
To run an OAM validation test for a VPRN service
To configure OAM components on a VPRN site
To create a TWAMP Light reflector on a VPRN site
To view the last cleared BFD statistics and sessions on a VPRN site
To view VPRN services that use an auto-assigned RT and RD or reservation table
To view the service topology map associated with a VPRN service