Chapter 16: Port and channel object configuration
Configuring port and channel objects
Digital diagnostics monitoring
Remote fiber link monitoring in 1830 VWM devices
Tagged and untagged VLAN ports
Connection termination points for services and interfaces
Configuring access SAP bandwidth CAC
SONET/SDH and TDM port encapsulation
SONET clear channel applications
TDM channelization and clear channel applications
Workflow to manage port objects
SONET and SDH sub-channel applications and structure
Comparison of SONET and SDH hierarchies
SDH AU-4 and AU-3 sub-channel applications
Workflow to manage channel objects
Procedures for port configuration
To configure Ethernet LAN ports on the 1830 VWM OSU and 1830 VWM SMM
To configure connector ports and breakout ports
To configure LLDP MED Network Policy
To configure a cellular port on a 7705 SAR-Hm
To configure a WLAN port on a 7705 SAR-Hm
To migrate SAPs from access mode to hybrid mode
To configure the NFM-P to retain non-default port MTU values
To copy or move L2 SAPs between ports
To copy or move L2 access interface SAPs between services
To move L3 SAPs within or between ports or LAGs on the same NE
To move L3 subscriber interface SAPs between ports on the same NE
To configure bandwidth CAC on an access SAP for services or a LAG
To add a queue group to an Ethernet port
To configure queue group scheduler overrides
To configure an HSMDA override
To configure a 7210 SAS-M channelized TDM DS1 or E1 port
To assign QoS policies to a 7210 SAS Ethernet port
To configure a virtual Ethernet port on a 7705 SAR 2-port ring MDA
To configure Ethernet Bandwidth Notification on a 7705 SAR Ethernet port
To configure PoE ports on a 7210 SAS
To enable or disable hardware timestamps for ports on the 7210 SAS
To configure MAC or VLAN authentication
To configure PoE ports on a 7705 SAR
To configure GPS on a 7705 SAR
To configure a 7705 SAR ASAP channelized TDM port
To configure a channelized TDM DS1 or E1 port
To configure OmniSwitch Ethernet ports
To configure OmniSwitch PoE Ports
To create and configure Xconnect anchor ports
To configure PXC loopback ports
Procedures for channel and framing link configuration
To configure SONET clear channels
To perform a bulk channel creation on ports that support multiple sub-channels
To configure SONET sub-channels
To create VT15 (TU11) or VT2 (TU12) sub-channels
To create TDM DS1 or E1 channels
To configure TDM DS1 or E1 channels
To configure a DS3/E3 channel as a network interface on a channelized ASAP MDA
To configure data framing on a 7705 SAR
To configure an L3 interface on a DS3/E3 channel on a channelized ASAP MDA
To view the channels associated with a 1830 VWM TLU port
To configure an OSC port of an 1830 VWM OSU as a RFLM port
To perform CPRI monitoring using 1830 VWM TLU 9M MON ports